THN 20-2423WI

TRACO
DC/DC Converter THN 20WI Series, 20 Watt • • Ultra compact size: 1.0" x 1.0" x 0.4" • • • • • Ultrawide 4:1 input voltage ranges • • I/O isolation voltage 1600 VDC • 3-year product warranty Shielded metal casing with isolated baseplate Very high efficiency up to 90% Output voltage adjustable UL 62368-1 IEC 62368-1 Remote On/Off control The THN 20WI series models are ...
развернуть ▼ свернуть ▲
Фотография серии THN20WI

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности дистанционные вкл./выкл., регулировка выхода
Комплекс защит короткого замыкания, перенапряжения
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 25.4×25.4×9.9 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 31

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= URA2415YMD-20WR3 (MORNSUN)
 
—
 
 — — — — — — —
A- TKA30C-C (MW)
 
2X2INCH в линейках 5 шт короткого замыкания, перегрузки — — — — — —
A- THN 20-2423WIR (TRACO)
 
— 6 шт короткого замыкания, перегрузки, перенапряжения — — — — — — — — —
A- THN 30-2423WI (TRACO)
 
— 1 шт дистанционные вкл.,/выкл., регулируемый выход короткого замыкания, перенапряжения, перегрева — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- THN 30-2423WIR (TRACO)
 
— КЗ, пониженное входное, перегрузка, перегрев — — — — — — — — —
A- RPA30-2415DAW-HC (RECOM)
 
—
 
 — — — — — — — — —
A- RPA30-2415DAW/P (RECOM)
 
—
 
 — — — — — — — — —
A- RP20-2415DAW/N (RECOM)
 
— в линейках 8 шт
 
 — — — — — — — — —
A- DKA30C-15 (MW)
 
2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 30 Вт; #: 2; U вх:... короткого замыкания, перегрузки — — — — — — — —
A- URA2415LD-20WR3 (MORNSUN)
 
2X1INCH 1 шт — — — — — — —
A- URA2415LD-30WR3 (MORNSUN)
 
2X1INCH 1 шт
 
 — — — — — — —
A- VRA2415LD-20WR3 (MORNSUN)
 
2X1INCH в линейках 10 шт
 
 — — — — — — —
A- TEN 20-2423WIN (TRACO)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 20 Вт; #: 2; U вх:... — — — — — — — Защита от КЗ: продолжительная с автовосстановлением
A- TKA30A-C (MW)
 
2X2INCH DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 30 Вт; #: 3; U вх:... короткого замыкания, перегрузки — — — —
A- TKA30B-C (MW)
 
2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 30 Вт; #: 3; U вх:... короткого замыкания, перегрузки — — — —
A- DKA30A-15 (MW)
 
2X2INCH в линейках 5 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x2 inch; P вых: 30 Вт; #: 2; U вх:... короткого замыкания, перегрузки — — — — — — — —
A- DKA30B-15 (MW)
 
2X2INCH в линейках 5 шт Преобразователь напряжения DC-DC на плату. 30Вт, стабилизированный, Uвх=18-36В, выход ±... — короткого замыкания, перегрузки — — — — — — — —
A- DKMW20F-15 (MW)
 
—
 
 —
A- DKMW20G-15 (MW)
 
—
 
 —
A- DKMW30F-15 (MW)
 
— 2 шт —
A- DKMW30G-15 (MW)
 
DIP-16 DIP16(stand) —
A- URA2415LD-20WR3A2S (MORNSUN)
 
— — — — — — — —
A- URA2415LD-20WR3A4S (MORNSUN)
 
— — — — — — — —
A- URA2415LD-30WR3A2S (MORNSUN)
 
—
 
 — — — — — — —
A- URA2415LD-30WR3A4S (MORNSUN)
 
—
 
 — — — — — — —
A- URA2415YMD-20WR3A4S (MORNSUN)
 
—
 
 — — — — — — —
A- URA4815LD-20WR3 (MORNSUN)
 
2X1INCH — — — — — — —
A- URA4815LD-20WR3A2S (MORNSUN)
 
— — — — — — — —
A- URA4815LD-20WR3A4S (MORNSUN)
 
— — — — — — — —
A- URA4815YMD-20WR3 (MORNSUN)
 
—
 
 — — — — — — —
A- VRA4815LD-20WR3 (MORNSUN)
 
2X1INCH в линейках 5 шт
 
 — — — — — — —

Файлы 5

показать свернуть
DC/DC Converter THN 20WI Series, 20 Watt • • Ultra compact size: 1.0" x 1.0" x 0.4" • • • • • Ultrawide 4:1 input voltage ranges • • I/O isolation voltage 1600 VDC • 3-year product warranty Shielded metal casing with isolated baseplate Very high efficiency up to 90% Output voltage adjustable UL 62368-1 IEC 62368-1 Remote On/Off control The THN 20WI series models are high performance DC/DC converters. They Operating temp. range –40°C to +75°C achieve 20 W output power and come in a small size metal casing (1.0" x 1.0" x 0.4"). The models feature an ultra-wide 4:1 input voltage range while the outand up to 85 °C with heat-sink Input filter meets EN 55032 class A without external components put voltages are precisely regulated even under no load conditions. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to 85°C. The low no-load input current characteristics and the remote On/Off control make these converters an ideal solution for battery operated systems. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order Code Input Voltage Range THN 20-2410WI THN 20-2411WI THN 20-2411WI-A1 THN 20-2412WI THN 20-2413WI THN 20-2415WI THN 20-2422WI THN 20-2423WI THN 20-2425WI THN 20-4810WI THN 20-4811WI THN 20-4811WI-A1 THN 20-4812WI THN 20-4813WI THN 20-4815WI THN 20-4822WI THN 20-4823WI THN 20-4825WI 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 4'500 mA 4'000 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 833 mA 667 mA 417 mA 4'500 mA 4'000 mA 4'000 mA 1'670 mA 1'330 mA 833 mA 833 mA 667 mA 417 mA Vnom Efficiency Imax –12 VDC –15 VDC –24 VDC 833 mA 667 mA 417 mA –12 VDC –15 VDC –24 VDC 833 mA 667 mA 417 mA typ. 89 % 89 % 88 % 89 % 89 % 91 % 89 % 90 % 91 % 90 % 90 % 89 % 89 % 90 % 91 % 89 % 90 % 91 % Options THN-HS1 Note - Optional Heat Sink: www.tracopower.com/products/thn-hs1.pdf - Suffix -A1: Adjustable output up to 6 VDC, suitable for low ripple & noise applications in conjunction with an LDO regulator. - ±24 Vout models: The output can also be used in serial circuit for single 48 VDC operation. www.tracopower.com September 17, 2021 Page 1 / 4 PDF
Документация на THN 20-2410WI 

THN 20WI Datasheet 20 Watt DC/DC converter, industrial, 4:1 input, encpasulated, 1.0" x 1.0" metal package

Дата модификации: 17.09.2021

Размер: 885.2 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters THN 20WI Series, 20 Watt Features ◆ Smallest encapsulated 20W Converter! CndBing pULe 60950-1 Scheme Ultra compact size: 1.0” x 1.0” x 0.4” UL 60950-1 ◆ Shielded metal case with isolated baseplate ◆ ◆ ◆ ◆ ◆ Ultrawide 4:1 input voltage ranges Very high efficiency up to 90% Output voltage adjustable Remote On/Off control Operating temp. range –40°C to +75°C and up to 85 °C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ Input filter meets EN 55022 class A without external components ◆ No minimum load required ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The THN-20WI series is the latest generation of high performance dc-dc converter modules with highest power density. The product achieves 20W output power while it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”. All models have an ultra wide 4:1 input voltage range and precisely regulated output voltages, even under no load conditions. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to 75°C or 85°C with optional mounted heat sink. Together with low input current characteristics at minimal load and remote On/Off control these converters are the ideal solution for battery-operated systems. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Output voltage Output current max. Efficiency typ. THN 20-2410WI Order code Input voltage range 3.3 VDC 4500 mA 86 % THN 20-2411WI 5.0 VDC 4000 mA 89 % THN 20-2412WI 9 – 36 VDC 12 VDC 1670 mA 89 % THN 20-2413WI (24 VDC nominal) 15 VDC 1330 mA 89 % THN 20-2422WI ±12 VDC ±833 mA 89 % THN 20-2423WI ±15 VDC ±667 mA 89 % THN 20-4810WI 3.3 VDC 4500 mA 86 % THN 20-4811WI 5.0 VDC 4000 mA 89 % THN 20-4812WI 18 – 75 VDC 12 VDC 1670 mA 89 % THN 20-4813WI (48 VDC nominal) 15 VDC 1330 mA 90 % THN 20-4822WI ±12 VDC ±833 mA 89 % THN 20-4823WI ±15 VDC ±667 mA 89 % http://www.tracopower.com Page 1 of 4 PDF
Документация на серию THN20WI 

THN15WI

Дата модификации: 11.10.2013

Размер: 362.9 Кб

4 стр.

DC/DC Converters THN 20WI Series, 20 Watt Features ◆ Smallest encapsulated 20W Converter! CndBing pULe 60950-1 Scheme Ultra compact size: 1.0” x 1.0” x 0.4” UL 60950-1 ◆ Shielded metal case with isolated baseplate ◆ ◆ ◆ ◆ ◆ Ultrawide 4:1 input voltage ranges Very high efficiency up to 90% Output voltage adjustable Remote On/Off control Operating temp. range –40°C to +75°C and up to 85 °C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ Input filter meets EN 55022 class A without external components ◆ No minimum load required ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The THN-20WI series is the latest generation of high performance dc-dc converter modules with highest power density. The product achieves 20W output power while it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”. All models have an ultra wide 4:1 input voltage range and precisely regulated output voltages, even under no load conditions. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to 75°C or 85°C with optional mounted heat sink. Together with low input current characteristics at minimal load and remote On/Off control these converters are the ideal solution for battery-operated systems. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Output voltage Output current max. Efficiency typ. THN 20-2410WI Order code Input voltage range 3.3 VDC 4500 mA 86 % THN 20-2411WI 5.0 VDC 4000 mA 89 % THN 20-2412WI 9 – 36 VDC 12 VDC 1670 mA 89 % THN 20-2413WI (24 VDC nominal) 15 VDC 1330 mA 89 % THN 20-2422WI ±12 VDC ±833 mA 89 % THN 20-2423WI ±15 VDC ±667 mA 89 % THN 20-4810WI 3.3 VDC 4500 mA 86 % THN 20-4811WI 5.0 VDC 4000 mA 89 % THN 20-4812WI 18 – 75 VDC 12 VDC 1670 mA 89 % THN 20-4813WI (48 VDC nominal) 15 VDC 1330 mA 90 % THN 20-4822WI ±12 VDC ±833 mA 89 % THN 20-4823WI ±15 VDC ±667 mA 89 % http://www.tracopower.com Page 1 of 4 PDF
Документация на серию THN20WI 

THN15WI

Дата модификации: 15.06.2012

Размер: 253.5 Кб

4 стр.

DC/DC Converters THL 20WI Series, 20 Watt Features ◆ Smallest encapsulated 20W converter! CB 226037 Ultra compact size: 1.0” x 1.0” x 0.4” Scheme IEC 60950-1 ◆ Shielded metal case with isolated baseplate ◆ ◆ ◆ ◆ ◆ Ultrawide 4:1 input voltage ranges Very high efficiency up to 90% Output voltage adjustable Remote On/Off control Operating temp. range –40°C to +75°C and up to +85°C with heat-sink ◆ I/O isolation voltage 1500 VDC ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The THL 20WI series is the latest generation of dc-dc converter modules with highest power density. The product achieves 20 Watt output power while it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”. All models have an ultra wide 4:1 input voltage range and precisely regulated output voltages. Highest efficiency of up to 90% makes this product very reliable and applicable in temperature ranges of up to +75°C or +85°C with optional mounted heat sink. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Output voltage Output current max. Efficiency typ. THL 20-2410WI Order code 3.3 VDC 4500 mA 87 % THL 20-2411WI 5.0 VDC 4000 mA 89 % 12 VDC 1670 mA 89 % 15 VDC 1340 mA 89 % THL 20-2412WI THL 20-2413WI THL 20-2415WI Input voltage range 9 – 36 VDC (24 VDC nominal) 24 VDC 835 mA 88 % THL 20-2422WI ±12 VDC ±835 mA 89 % THL 20-2423WI ±15 VDC ±670 mA 89 % THL 20-4810WI 3.3 VDC 4500 mA 88 % THL 20-4811WI 5.0 VDC 4000 mA 89 % THL 20-4812WI 12 VDC 1670 mA 89 % 15 VDC 1340 mA 90 % 24 VDC 835 mA 88 % THL 20-4822WI ±12 VDC ±835 mA 89 % THL 20-4823WI ±15 VDC ±670 mA 89 % THL 20-4813WI THL 20-4815WI http://www.tracopower.com 18 – 75 VDC (48 VDC nominal) Page 1 of 4 PDF
Документация на серию THN20WI 

THN15WI

Дата модификации: 05.06.2012

Размер: 245 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)