TMA 1505D

TRACO
DC/DC конвертор: 1 Вт; корпус PCB SIP7; выходов 2: 5В @ 0.1А, -5В @ 0.1А; вход: 13.5...16.5 [15] В; -40...85 °C; изоляция вх-вых: 1 кВ
развернуть ▼ свернуть ▲
Фотография серии TMA

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 19.5×10.2×7.1 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- WRE2405S-1WR2 (MORNSUN)
 
SIP87 — — — — — — —
A- TMA 1205D (TRACO)
 
SIP6 в линейках 10 шт — — — — — — — —
A- TMV 1205D (TRACO)
 
SIP7 в линейках 10 шт короткого замыкания, перенапряжения, перегрева — — — — — — — —
A- TSM 1205D (TRACO)
 
SMD1810 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD18; P вых: 1 Вт; #: 2; U вх: 10.... короткого замыкания, перенапряжения, перегрева — — — — — — — —
A- DETN01M-05 (MW)
 
— — — — — — — —
A- DPU01M-05 (MW)
 
— — — — — — — —
A- DPU01M-05B3 (MW)
 
SIP7 25 шт DC-DC модульный преобразователь - — — — — — — — — —
A- E1205XT-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- E1505S-1WR3 (MORNSUN)
 
— — — — — — — —
A- UWE1205S-1WR3 (MORNSUN)
 
— 1 шт — — — — — — —
A- WRE1205S-1WR2 (MORNSUN)
 
SIP87 — — — — — — —
A- MDD01M-05 (MW)
 
SIP7 5 шт — — — — — — —
A- A1205S-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — —
A- G1205S-1WR2 (MORNSUN)
 
SIP76 — — — — — — —
A- A1205XT-1WR3 (MORNSUN)
 
— в линейках 20 шт — — — — — — —
A- WRA1205S-1WR2 (MORNSUN)
 
SIP87 1 шт — — — — — — —
A- A1505S-1WR2 (MORNSUN)
 
SIP76 110 шт — — — — — — —
A- A1505S-1WR3 (MORNSUN)
 
SIP76 в линейках 234 шт — — — — — — —
A- WRA2405S-1WR2 (MORNSUN)
 
SIP87 1 шт — — — — — — —
A- E1205S-1WR3 (MORNSUN)
 
— в линейках 100 шт — — — — — — —
A- TRV 1-1221M (TRACO)
 
— 1 шт — — — — — — — — —
A- TRV 1-1521M (TRACO)
 
SIP9 — — — — — — — — —
A- TMV 1205D EN (TRACO)
 
SIP76 — — — — — — — —
A- TMV 1205DEN (TRACO)
 
SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 10.8... — — — — — — — —
A- TMV 1205DHI (TRACO)
 
SIP7 — — — — — — — — —

Файлы 4

показать свернуть
DC/DC Converter • • • • • • TMA Series, 1 Watt Industry standard pinout Non-regulated output Single and dual output models I/O isolation voltage 1000VDC High efficiency Operating temperature range –40 °C to +85 °C The TMA series are miniature, isolated 1 W DC/DC-converters in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD technology makes it possible to offer a product with high performance at low cost. Models Order Code Input Voltage Range TMA 0505S TMA 0512S TMA 0515S TMA 0505D TMA 0512D TMA 0515D TMA 1205S TMA 1212S TMA 1215S TMA 1205D TMA 1212D TMA 1215D TMA 1505S TMA 1512S TMA 1515S TMA 1505D TMA 1512D TMA 1515D TMA 2405S TMA 2412S TMA 2415S TMA 2405D TMA 2412D TMA 2415D www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 13.5 - 16.5 VDC (15 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA January 7, 2022 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA typ. 71 % 78 % 78 % 72 % 78 % 79 % 73 % 80 % 80 % 74 % 81 % 81 % 72 % 79 % 79 % 72 % 80 % 80 % 71 % 78 % 79 % 72 % 79 % 80 % Page 1 / 4 PDF
Документация на TMA 0505D 

TMA Datasheet 1 Watt DC/DC converter, industrial, ±10% input, unregulated, 1500 VDC I/O-siolation, encapsulated, SIP-7 package

Дата модификации: 07.01.2022

Размер: 786.9 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TMA Series, 1 Watt Features ◆ Single-in-line (SIP) package ◆ Single and dual output models ◆ I/O isolation 1‘000 VDC ◆ High efficiency up to 81% ◆ Operating temp. range –40°C to +85°C ◆ Industry standard pinout ◆ 100% Burn-in (8 h) ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TMA series are miniature, isolated 1 W DC/DC-converters in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMDtechnology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage TMA 0505S 5 VDC TMA 0512S TMA 0515S Output voltage 5 VDC ± 10% Output current max. 200 mA Efficiency typ. 71 % 12 VDC 80 mA 78 % 15 VDC 65 mA 78 % TMA 0505D ± 5 VDC ±100 mA 72 % TMA 0512D ±12 VDC ± 40 mA 78 % TMA 0515D ±15 VDC ±35 mA 79 % TMA 1205S 5 VDC 200 mA 73 % TMA 1212S TMA 1215S 12 VDC ± 10% 12 VDC 80 mA 80 % 15 VDC 65 mA 80 % TMA 1205D ±5 VDC ±100 mA 74 % TMA 1212D ±12 VDC ±40 mA 81 % TMA 1215D ±15 VDC ±35 mA 81 % TMA 1505S 5 VDC 200 mA 73 % TMA 1512S 12 VDC 80 mA 80 % TMA 1515S 15 VDC ± 10% TMA 1505D 15 VDC 65 mA 80 % ±5 VDC ±100 mA 74 % TMA 1512D ±12 VDC ±40 mA 81 % TMA 1515D ±15 VDC ±35 mA 81 % TMA 2405S 5 VDC 200 mA 71 % TMA 2412S 12 VDC 80 mA 78 % TMA 2415S TMA 2405D 24 VDC ± 10% 15 VDC 65 mA 79 % ±5 VDC ±100 mA 72 % TMA 2412D ±12 VDC ±40 mA 79 % TMA 2415D ±15 VDC ±35 mA 80 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TMA 

datasheet

Дата модификации: 11.02.2014

Размер: 138.7 Кб

3 стр.

DC/DC Converters TMA Series, 1 Watt RoHS compliant Features ◆ Single-in-Line (SIL) Package ◆ Single and Dual Output Models ◆ I/O-Isolation 1‘000 VDC ◆ High Efficiency up to 81% ◆ Operating Temperature –40°C to +85°C ◆ Industry Standard Pinout ◆ 100% Burn-in (8 h) ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TMA series are miniature, isolated 1 W DC/DC-converters in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMDtechnology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage TMA 0505S Output voltage Output current max. Efficiency typ. 5 VDC 200 mA 71 % 12 VDC 80 mA 78 % 15 VDC 65 mA 78 % TMA 0505D ± 5 VDC ±100 mA 72 % TMA 0512D ±12 VDC ± 40 mA 78 % TMA 0515D ±15 VDC ± 35 mA 79 % TMA 1205S 5 VDC 200 mA 73 % 12 VDC 80 mA 80 % 15 VDC 65 mA 80 % TMA 1205D ± 5 VDC ±100 mA 74 % TMA 1212D ±12 VDC ± 40 mA 81 % TMA 1215D ±15 VDC ± 35 mA 81 % TMA 1505S 5 VDC 200 mA 73 % TMA 1512S 12 VDC 80 mA 80 % TMA 0512S TMA 0515S 5 VDC ± 10% TMA 1212S TMA 1215S TMA 1515S 12 VDC ± 10% 15 VDC ± 10% 15 VDC 65 mA 80 % TMA 1505D ± 5 VDC ±100 mA 74 % TMA 1512D ±12 VDC ± 40 mA 81 % TMA 1515D ±15 VDC ± 35 mA 81 % TMA 2405S 5 VDC 200 mA 71 % TMA 2412S 12 VDC 80 mA 78 % TMA 2415S 24 VDC ± 10% 15 VDC 65 mA 79 % TMA 2405D ± 5 VDC ±100 mA 72 % TMA 2412D ±12 VDC ± 40 mA 79 % TMA 2415D ±15 VDC ± 35 mA 80 % http://www.tracopower.com Page 1 of 3 PDF
Документация на серию TMA 

TMA.indd

Дата модификации: 19.01.2006

Размер: 155.1 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)