TMDC 20-4815

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲
photo

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 96×54×23.3 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- PSD-45A-24 (MW)
 
— 1 шт DC-DC модульный преобразователь - Монтаж: открытый; P вых: 45 Вт; #: 1; U вх: 9.2...18 ... — — — — — — —
A- PSD-30C-24 (MW)
 
— 1 шт DC-DC модульный преобразователь - Монтаж: открытый; P вых: 30 Вт; #: 1; U вх: 36...72 В... — — — — — — —
A- MDS20A-24 (MW)
 
— в линейках 18 шт — — — — — — — — —
A- MDS20C-24 (MW)
 
— в линейках 18 шт — — — — — — — — —
A- PSD-30B-24 (MW)
 
— 7 шт DC-DC модульный преобразователь - Монтаж: открытый; P вых: 30 Вт; #: 1; U вх: 18...36 В... — — — — — — —
A- SD-25B-24 (MW)
 
— 1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 25 Вт; #: 1; U вх: 19...36 В... короткого замыкания, перегрузки, перенапряжения — — — — — — —
A- SD-25C-24 (MW)
 
— 1 шт короткого замыкания, перегрузки, перенапряжения — — — — — — — — —
A- URB2424LD-20WR3 (MORNSUN)
 
2X1INCH в линейках 30 шт — — — — — — — — —
A- URB2424YMD-20WR3 (MORNSUN)
 
— в линейках 3 шт
 
 — — — — — — — — —
A- TCL 012-124 DC (TRACO)
 
— 1 шт DC-DC модульный преобразователь - Монтаж: на DIN рейку; P вых: 24 Вт; #: 1; U вх: 9.5..... короткого замыкания, перенапряжения — — — — — — — — — —
A- DDR-30G-24 (MW)
 
— в коробках 96 шт КЗ, переполюсовки, пониженного входного напряжения —
A- PSD-30A-24 (MW)
 
— в коробках 6 шт — — — — — — —
A- DDR-30L-24 (MW)
 
— в коробках 10 шт КЗ, переполюсовки, пониженного входного напряжения — — — — — — — — —
A- URB4824YMD-20WR3A4S (MORNSUN)
 
—
 
 — — — — — — — — —
A- SD-25A-24 (MW)
 
— 1 шт короткого замыкания, перегрузки, перенапряжения — — — — — — — — —
A- RDDW20UW-24 (MW)
 
— КЗ, перегрузка, перенапряжение, от пониженного входного напряжения — — — — — — —
A- RSD-30G-24 (MW)
 
— 1 шт короткого замыкания, перегрузки, перенапряжения, переполюсовки — — — — — — —
A- RSD-30H-24 (MW)
 
— 1 шт короткого замыкания, перегрузки, перенапряжения, переполюсовки — — — — — — —
A- RSD-30L-24 (MW)
 
— 1 шт короткого замыкания, перегрузки, перенапряжения, переполюсовки — — — — — — —
A- MDS20B-24 (MW)
 
— в линейках 18 шт — — — — — — — — —
A- NID30S48-24 (MW)
 
— DC/DC-Conv 30-53V:24V 1,25A 30W короткого замыкания, перегрузки, перенапряжения — — — — — — — —
A- URF4824LP-20WR3A4S (MORNSUN)
 
—
 
 — — — — — — — — — — —
A- URB4824YMD-20WR3 (MORNSUN)
 
—
 
 — — — — — — — — —
A- URB4824YMD-20WR3A2S (MORNSUN)
 
—
 
 — — — — — — — — —
A- URA2424LD-30WR3 (MORNSUN)
 
2X1INCH
 
 — — — — — — —

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TMDC 20 Series, 20 Watt • Fully encapsulated low profile plastic case • • Ultra wide 4:1 input voltage range • • • • • • I/O isolation 2500 VDC • 3-year product warranty Operating temperature range –40°C to +90°C Excellent efficiency up to 91 % Input filter to meet EN 55022, class A Optional DIN-Rail mount adapter No minimum load required Power good LED indicator and remote on/off function UL 62368-1 IEC 62368-1 The TMDC 20 Series is a range of encapsulated high performance DC/DC converter modules. With a very high efficiency of up to 91% and the use of highest grade components these 20 W converters are made for a reliable operation in the temperature range of -40°C up to 90°C. They come in chassis mount version with screw terminal block. The 8 models have a wide 4:1 input voltage range and a tight output voltage regulation. They do not need a minimum load and offer a high efficiency also at low load conditions. They feature a remote control input and a green power good LED which indicates the presence of the output voltage. Protection against overload and short circuit are standard features of these converters. EMC characteristics and safety certifications are aligned for the operation in industrial environment. Models Order Code Input Voltage Range Output Voltage nom. Output Current max. Efficiency typ. TMDC 20-2411 5.1 VDC 4'000 mA 90 % TMDC 20-2412 12 VDC 1'670 mA 91 % 24 VDC 835 mA 91 % 9 - 36 VDC (24 VDC nom.) TMDC 20-2415 TMDC 20-2418 48 VDC 420 mA 89 % TMDC 20-4811 5.1 VDC 4'000 mA 90 % 12 VDC 1'670 mA 91 % 24 VDC 835 mA 91 % 48 VDC 420 mA 89 % TMDC 20-4812 18 - 75 VDC (48 VDC nom.) TMDC 20-4815 TMDC 20-4818 Options TMP-MK1 - Optional DIN-Rail Mounting Kit: www.tracopower.com/products/tmp-mk1.pdf www.tracopower.com January 27, 2021 Page 1 / 4 PDF
Документация на TMDC 20-2411 

TMDC 20 Datasheet 20 Watt DC/DC converter, industrial, 4:1 input, harsh industrial EMC capabilities, 2500 VDC isolation, encpasulated, chassis mount, 3.78" x 1.81"

Дата модификации: 27.01.2021

Размер: 1.83 Мб

4 стр.

DC/DC Converters TMDC 20 Series, 20 Watt CB Features ◆ Fully encapsulated low profile plastic case ◆ Ultra wide 4 : 1 input voltage range ◆ Operating temperature range Scheme –40°C to +90°C ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ I/O isolation 2500 VDC Excellent efficiency up to 91 % Input filter to meet EN 55022, class A Optional DIN-Rail mount adapter No minimum load required Power good LED indicator Remote On/Off 3-year product warranty The TMDC 20 Series is a range of encapsulated high performance DC/DC converter modules. With a very high efficiency of up to 91% and the use of highest grade components these 20 W converters are made for a reliable operation in the temperature range of -40°C up to 90°C. They come in chassis mount version with screw terminal block. The 8 models have a wide 4:1 input voltage range and a tight output voltage regulation. They do not need a minimum load and offer a high efficiency also at low load conditions. They feature a remote control input and a green power good LED which indicates the presence of the output voltage. Protection against overload and short circuit are standard features of these converters. EMC characteristics and safety certifications are aligned for the operation in industrial environment. Models Order code Input voltage range TMDC 20-2411 TMDC 20-2412 TMDC 20-2415 TMDC 20-2418 9 – 36 VDC (nominal 24 VDC) TMDC 20-4811 TMDC 20-4812 TMDC 20-4815 TMDC 20-4818 http://www.tracopower.com 18 – 75 VDC (nominal 48 VDC) Output voltage Output current max. Efficiency 5.1 VDC 4‘000 mA 90 % 12 VDC 1’670 mA 91 % 24 VDC 835 mA 91 % 48 VDC 420 mA 89 % 5.1 VDC 4‘000 mA 90 % 12 VDC 1’670 mA 91 % 24 VDC 835 mA 91 % 48 VDC 420 mA 89 % Page 1 of 4 PDF
Документация на серию TMDC 20 

Datasheet

Дата модификации: 17.10.2016

Размер: 1.05 Мб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)