TMR 1-0511

TRACO
DC/DC Converter • • • • • • • • • TMR 1 Series, 1 Watt Wide 2:1 input voltage range Compact SIP-6 package Fully regulated outputs Cost optimised design No minimum load required Continuous short circuit protection Temperature range –40°C to +95°C I/O isolation 1500 VDC 3-year product warranty UL 62368-1 IEC 62368-1 The TMR 1 series is a family of isolated 1 W DC/DC converter modules with reg...
развернуть ▼ свернуть ▲
Фотография серии TMR1

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 17×11.1×7.62 мм
Рабочая температура
Примечания Защита от КЗ: продолжительная с автовосстановлением
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= B0505LM-1WR3 (MORNSUN)
 
—
 
 — — — — — — — — — — — — — — — — — — — — — — — —
A- B0505LS-1WR2 (MORNSUN)
 
SIP76 1 шт — — — — — — — — —
A- DETN01L-05 (MW)
 
— 30 шт — — — — — — —
A- MDD01L-05 (MW)
 
SIP7 11 шт — — — — — — —
A- E0505S-1WR3 (MORNSUN)
 
SIP76 в линейках 200 шт — — — — — — —
A- F0505LT-1WR3 (MORNSUN)
 
SMD10 в линейках 3 шт — — — — — — — — —
A- F0505XT-1WR3 (MORNSUN)
 
SMD8 в линейках 760 шт — — — — — — — — —
A- G0505S-1WR2 (MORNSUN)
 
SIP76 160 шт — — — — — — —
A- H0505S-1WR2 (MORNSUN)
 
SIP76 в линейках 5 шт — — — — — — — — —
A- IB0505LS-1WR3 (MORNSUN)
 
SIP76 в линейках 170 шт — — — — — — — — —
A- A0505S-1WR3 (MORNSUN)
 
SIP76 1 шт — — — — — — —
A- A0505XT-1WR3 (MORNSUN)
 
SMD10 в линейках 1000 шт — — — — — — —
A- B0505LS-1WR3 (MORNSUN)
 
SIP76 1 шт — — — — — — — — —
A- B0505MT-1WR4 (MORNSUN)
 
— в ленте 200 шт ультракомпактный, изолированный — — — — — — — —
A- B0505S-1WR2 (MORNSUN)
 
SIP4 1 шт — — — — — — — — —
A- B0505S-1WR3 (MORNSUN)
 
SIP4 в линейках 43 шт — — — — — — — — —
A- B0505T-1WR3 (MORNSUN)
 
SMD8 в линейках 740 шт — — — — — — — — —
A- B0505XT-1WR3 (MORNSUN)
 
SMD8 в линейках 500 шт — — — — — — — — —
A- TES 1-0511V (TRACO)
 
SMD1210 в линейках 10 шт — — — — — — — — — —
A- TMV 0505D (TRACO)
 
SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 4.5.... — — — — — — — —
A- TRN 1-0511 (TRACO)
 
— в линейках 10 шт — — — — — — — — — — —
A- TRN 1-4811SM (TRACO)
 
— в линейках 10 шт — — — — — — — — — — —
A- TSM 0505D (TRACO)
 
SMD1810 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD18; P вых: 1 Вт; #: 2; U вх: 4.5... короткого замыкания, перенапряжения, перегрева — — — — — — — —
A- TSM 0505S (TRACO)
 
SMD148 в линейках 10 шт — — — — — — — — — —
A- AM1A-0505SZ (AIMTEC)
 
— в линейках 20 шт
 
 — — — — — — — — —

Файлы 3

показать свернуть
DC/DC Converter • • • • • • • • • TMR 1 Series, 1 Watt Wide 2:1 input voltage range Compact SIP-6 package Fully regulated outputs Cost optimised design No minimum load required Continuous short circuit protection Temperature range –40°C to +95°C I/O isolation 1500 VDC 3-year product warranty UL 62368-1 IEC 62368-1 The TMR 1 series is a family of isolated 1 W DC/DC converter modules with regulated output, featuring wide 2:1 input voltage ranges. These products come in a compact SIP-6 package with small footprint. An excellent efficiency allows –40°C to +95°C operation temperature. Further features continuous short circuit protection. The compact dimensions and cost optimised design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order Code Input Voltage Range TMR 1-0511 TMR 1-0512 TMR 1-0513 TMR 1-0515 TMR 1-0522 TMR 1-0523 TMR 1-1211 TMR 1-1212 TMR 1-1213 TMR 1-1215 TMR 1-1222 TMR 1-1223 TMR 1-2411 TMR 1-2412 TMR 1-2413 TMR 1-2415 TMR 1-2422 TMR 1-2423 TMR 1-4811 TMR 1-4812 TMR 1-4813 TMR 1-4815 TMR 1-4822 TMR 1-4823 www.tracopower.com 4.5 - 9 VDC (5 VDC nom.) 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) 36 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA 200 mA 83 mA 67 mA 42 mA 42 mA 33 mA August 27, 2021 Vnom Efficiency Imax –12 VDC –15 VDC 42 mA 33 mA –12 VDC –15 VDC 42 mA 33 mA –12 VDC –15 VDC 42 mA 33 mA –12 VDC –15 VDC 42 mA 33 mA typ. 76 % 77 % 79 % 76 % 77 % 78 % 77 % 77 % 80 % 77 % 79 % 78 % 77 % 80 % 80 % 77 % 80 % 80 % 77 % 78 % 78 % 76 % 79 % 79 % Page 1 / 4 PDF
Документация на TMR 1-0511 

TMR 1 Datasheet 1 Watt DC/DC converter, industrial, 2:1 input, regulated, 1600 VDC I/O-isolation, encapsulated, SIP-6

Дата модификации: 27.08.2021

Размер: 864.2 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TMR 1 & TMR 1SM Series, 1 Watt Features ◆ Wide 2:1 input voltage range ◆ Compact SIP-6 or SMD package ◆ Fully regulated outputs ◆ Cost optimised design ◆ No minimum load required ◆ Continuous short circuit protection ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Remote On/Off control (SMD) ◆ 3-year product warranty CB Scheme The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. These products come in a compact SIP-6 or SMD package with small footprint occupying only 1.2 cm2 (0.2 square inch) of board space. An excellent efficiency allows –40°C to +85°C operation temperature. Further features include remote On/Off control (SMD-Version) and continuous short circuit protection. The compact dimensions and cost optimised design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order code SIP-package Order code SMD-package TMR 1-0511 TMR 1-0512 TMR 1-0513 TMR 1-0515 TMR 1-0522 TMR 1-0523 TMR 1-1211 TMR 1-1212 TMR 1-1213 TMR 1-1215 TMR 1-1222 TMR 1-1223 TMR 1-2411 TMR 1-2412 TMR 1-2413 TMR 1-2415 TMR 1-2422 TMR 1-2423 TMR 1-4811 TMR 1-4812 TMR 1-4813 TMR 1-4815 TMR 1-4822 TMR 1-4823 TMR 1-0511SM TMR 1-0512SM TMR 1-0513SM TMR 1-0522SM TMR 1-0523SM TMR 1-1211SM TMR 1-1212SM TMR 1-1213SM TMR 1-1222SM TMR 1-1223SM TMR 1-2411SM TMR 1-2412SM TMR 1-2413SM TMR 1-2422SM TMR 1-2423SM TMR 1-4811SM TMR 1-4812SM TMR 1-4813SM TMR 1-4822SM TMR 1-4823SM http://www.tracopower.com Input voltage range Output voltage 4.5 – 9.0 VDC (5 VDC nominal) 9.0 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC Output current max. Efficiency SIP typ. Efficiency SMD typ. 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 76 % 77 % 79 % 76 % 77 % 78 % 77 % 77 % 80 % 77 % 79 % 78 % 77 % 80 % 80 % 77 % 80 % 80 % 77 % 78 % 78 % 76 % 79 % 79 % 78 % 79 % 81 % 79 % 80 % 79 % 79 % 82 % 81 % 80 % 79 % 82 % 82 % 82 % 82 % 79 % 80 % 80 % 81 % 81 % Page 1 of 4 PDF
Документация на серию TMR1 

Datasheet

Дата модификации: 30.08.2013

Размер: 245.8 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)