TMR 1-1222

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 17×7.62×11 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- TES 1-1222 (TRACO) SMD8 в линейках 10 шт
A- TRV 1-1222M (TRACO) SIP9
A- DETN01M-12 (MW) в линейках 26 шт
A- DPRN01M-12 (MW) SIP7 11 шт
 
A- TRA 1-1222 (TRACO) SIP7
 
A- TMA 1512D (TRACO) SIP6 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 13.5...
A- TMR 1-0522 (TRACO) SIP6 в линейках 10 шт
 
A- TMR 1-0522SM (TRACO) SMD148
 
A- TMR 1-1222SM (TRACO) SMD148 в линейках 10 шт Защита от КЗ: продолжительная с автовосстановлением
A- TMR 1-2422 (TRACO) SIP6 в линейках 10 шт Защита от КЗ: продолжительная с автовосстановлением
A- TMR 1-2422SM (TRACO) SMD148 1 шт Защита от КЗ: продолжительная с автовосстановлением
A- TMA 1212D (TRACO) SIP6 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 10.8...
A- A1212S-1WR3 (MORNSUN) в линейках 100 шт
A- TRV 1-1522M (TRACO) SIP9
A- TES 1-1222V (TRACO) SMD1210 в линейках 10 шт
A- TRV 1-2422M (TRACO) SIP9
A- TBA 1-1222E (TRACO) 1 шт
A- TSM 1212D (TRACO) SMD1810 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD18; P вых: 1 Вт; #: 2; U вх: 10.... короткого замыкания, перенапряжения, перегрева
A- TMV 1212D (TRACO) SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 10.8...
A- TMV 1212D EN (TRACO) SIP76 в линейках 10 шт
A- TMV 1212DEN (TRACO) SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 10.8...
A- TMV 1212DHI (TRACO) SIP7
A- A1212S-1WR2 (MORNSUN) SIP76 в линейках 200 шт
A- A1212XT-1WR3 (MORNSUN) 1 шт

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TMR 1 & TMR 1SM Series, 1 Watt Features ◆ Wide 2:1 input voltage range ◆ Compact SIP-6 or SMD package ◆ Fully regulated outputs ◆ Cost optimised design ◆ No minimum load required ◆ Continuous short circuit protection ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1500 VDC ◆ Remote On/Off control (SMD) ◆ 3-year product warranty CB UL 60950-1 Scheme The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. These products come in a compact SIP-6 or SMD package with small footprint occupying only 1.2 cm2 (0.2 square inch) of board space. An excellent efficiency allows –40°C to +85°C operation temperature. Further features include remote On/Off control (SMD-Version) and continuous short circuit protection. The compact dimensions and cost optimised design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order code SIP-package Order code SMD-package TMR 1-0511 TMR 1-0512 TMR 1-0513 TMR 1-0515 TMR 1-0522 TMR 1-0523 TMR 1-1211 TMR 1-1212 TMR 1-1213 TMR 1-1215 TMR 1-1222 TMR 1-1223 TMR 1-2411 TMR 1-2412 TMR 1-2413 TMR 1-2415 TMR 1-2422 TMR 1-2423 TMR 1-4811 TMR 1-4812 TMR 1-4813 TMR 1-4815 TMR 1-4822 TMR 1-4823 TMR 1-0511SM TMR 1-0512SM TMR 1-0513SM TMR 1-0522SM TMR 1-0523SM TMR 1-1211SM TMR 1-1212SM TMR 1-1213SM TMR 1-1222SM TMR 1-1223SM TMR 1-2411SM TMR 1-2412SM TMR 1-2413SM TMR 1-2422SM TMR 1-2423SM TMR 1-4811SM TMR 1-4812SM TMR 1-4813SM TMR 1-4822SM TMR 1-4823SM http://www.tracopower.com Input voltage range Output voltage 4.5 – 9.0 VDC (5 VDC nominal) 9.0 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ±12 VDC ±15 VDC Output current max. Efficiency SIP typ. Efficiency SMD typ. 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 200 mA 83 mA 67 mA 42 mA ±42 mA ±33 mA 76 % 77 % 79 % 76 % 77 % 78 % 77 % 77 % 80 % 77 % 79 % 78 % 77 % 80 % 80 % 77 % 80 % 80 % 77 % 78 % 78 % 76 % 79 % 79 % 78 % 79 % 81 % 79 % 80 % 79 % 79 % 82 % 81 % 80 % 79 % 82 % 82 % 82 % 82 % 79 % 80 % 80 % 81 % 81 % Page 1 of 4 PDF
Документация на TMR 1-4815 

Datasheet

Дата модификации: 21.03.2016

Размер: 332.9 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.