TMR 2-2423WI

DC/DC конвертор: 2 Вт; корпус PCB SIP9; выходов 2: 15В @ 0.065А, -15В @ 0.065А; вход: 9...36 [24] В; -40...75 °C; изоляция вх-вых: 1 кВ

развернуть ▼ свернуть ▲

Группа: DC-DC модульные преобразователи
Серия: TMR2WI
Корпус: SIP87
Норма упаковки: 10 шт. (в линейках)

шт в корзину копировать сравнитьтовар в списке сравнения

Технические характеристики

показать свернуть

	Монтаж
	Выходная мощность
	Количество каналов
	Входное напряжение
	Параметры выходов
	Возможности
	Комплекс защит
	Номинальное входное напряжение
	Напряжение 1 выхода
	Напряжение 2 выхода
	Ток 1 выхода
	Ток 2 выхода
	Уровень пульсаций
	КПД
	Напряжение изоляции вход-выход
	Размер	26×12.5×9.3 мм
	Рабочая температура
	Примечания	Защита от КЗ: продолжительная с автовосстановлением

Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги ³¹

показать свернуть

Тип	Наименование	Корпус	Упаковка	Защита	U2	U3	I3	Шум	КПД	Паралл. сх.	Uиз. вх-общ	Uиз. вых-общ	Uиз. вых-вых	Серт. медиц.	Примечания
A-	TEC 2-2423WI (TRACO)	—	в линейках 10 шт			—	—	—		—	—	—	—	—	—
A-	TEC 3-2423WI (TRACO)	—				—	—	—		—	—	—	—	—	—
A-	TMR 3-2423WI (TRACO)	SIP87	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением
A-	TMR 3-2423WIR (TRACO)	—				—	—	—		—	—	—	—	—	—
A-	DPBW03F-15 (MW)	—	10 шт	короткого замыкания, перегрузки, пониженного входного напряжения		—	—	—			—	—	—		—
A-	RS-2415DZ (RECOM)	SIP87	1 шт		—	—	—	—	—		—	—	—		—
A-	RS-2415DZ/H3 (RECOM)	SIP87			—	—	—	—	—		—	—	—		—
A-	TDR 3-0523SM (TRACO)	SMD148	1 шт			—	—			—	—	—	—	—	—
A-	TEL 3-2423 (TRACO)	DIP-24	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением. Опция - металлический корпус
A-	TEN 3-4823 (TRACO)	DIP-24	в линейках 10 шт	короткого замыкания, перенапряжения, перегрева		—	—				—	—	—		Защита от КЗ: продолжительная с автовосстановлением
A-	TES 2N-2423 (TRACO)	SMD5	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TES 2N-4823 (TRACO)	SMD5	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TES 3-1223 (TRACO)	SMD5	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TMH 1215D (TRACO)	SIP7	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TMR 1223 (TRACO)	SIP87	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением
A-	TMR 2423 (TRACO)	SIP87	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением
A-	TMR 3-2423 (TRACO)	SIP87	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением
A-	A1515S-2WR2 (MORNSUN)	SIP76	в линейках 20 шт			—	—	—			—	—	—		—
A-	A2415S-2WR2 (MORNSUN)	SIP76	в линейках 12 шт			—	—	—			—	—	—		—
A-	DCWN03B-15 (MW)	DIP2410	в линейках 100 шт	короткого замыкания, перегрузки, перенапряжения		—	—				—	—	—		—
A-	DETN02M-15 (MW)	SMD10	в линейках 28 шт			—	—	—			—	—	—		—
A-	RD-1215D (RECOM)	SIP76	в линейках 25 шт		—	—	—	—	—		—	—	—		—
A-	RS-2415D (RECOM)	SIP87	в линейках 22 шт		—	—	—	—	—		—	—	—		—
A-	P14TG-4815Z2:1LF (PEAK)	DIP2410	в линейках 15 шт			—	—			—	—	—	—	—	Суффикс LF означает отсутствие свинца
A-	TEC 2-1223 (TRACO)	—				—	—	—		—	—	—	—	—	—
A-	TEC 2-1223WI (TRACO)	—				—	—	—		—	—	—	—	—	—
A-	TEM 2-1222 (TRACO)	DIP2410	в линейках 10 шт			—	—			—	—	—	—	—
A-	TBA 2-1223 (TRACO)	—				—	—	—		—	—	—	—	—	—
A-	TBA 2-2423 (TRACO)	—	10 шт			—	—	—		—	—	—	—	—	—
A-	TEC 2-2423 (TRACO)	—	в линейках 10 шт			—	—	—		—	—	—	—	—	—
A-	TMR 3-4823 (TRACO)	SIP87	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением

Файлы ⁵

показать свернуть

DC/DC Converter • • • • • • • • • • TMR 2WI Series, 2 Watt Ultra-wide 4:1 input range SIP-9 package Temperature range –40 to +85°C High efficiency Excellent load and line regulation Indefinite short-circuit protection I/O isolation 1500 VDC Remote On/Off control Fully RoHS compliant 3-year product warrenty The TMR 2WI series is a new family of isolated 2W DC/DC converter modules with regulated output, featuring ultra-wide 4:1 input voltage ranges of 9-36 VDC or 18-75 VDC. The product comes in a ultra-compact SIP-9 plastic package. An excellent efficiency up to 84% allows –40°C to +85°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. Typical applications for these ultra-compact converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where space on the PCB is critical. Models Order Code Input Voltage Range TMR 2-2410WI TMR 2-2411WI TMR 2-2412WI TMR 2-2413WI TMR 2-2421WI TMR 2-2422WI TMR 2-2423WI TMR 2-4810WI TMR 2-4811WI TMR 2-4812WI TMR 2-4813WI TMR 2-4821WI TMR 2-4822WI TMR 2-4823WI www.tracopower.com 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 500 mA 400 mA 167 mA 134 mA 200 mA 83 mA 67 mA 500 mA 400 mA 167 mA 134 mA 200 mA 83 mA 67 mA January 17, 2022 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA typ. 71 % 76 % 79 % 80 % 73 % 77 % 79 % 70 % 72 % 78 % 78 % 70 % 76 % 76 % Page 1 / 4

PDF

Документация на TMR 2-2410WI

TMR 2WI Datasheet 2 Watt DC/DC converter, industrial, 4:1 input, regulated, 1600 VDC I/O-isolation, encapsulated, SIP-9

Дата модификации: 17.01.2022

Размер: 816.4 Кб

4 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TDR 2WI Series, 2 Watt UL 60950-1 Features ◆ Compact design in SMD or DIP package ◆ Ultra wide 4:1 input voltage range ◆ Fully regulated outputs ◆ Low ripple and noise ◆ No minimum load required ◆ Temperature range –40°C to +85°C without derating ◆ ◆ ◆ ◆ ◆ I/O isolation 1500 VDC Continuous short-circuit protection Remote On/Off control Fully RoHS compliant 3-year product warranty The TDR-2WI series is a family of compact 2 W dc/dc-converters with 4:1 input voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to 85°C without power derating, continuous short circuit protection and excellent immunity against environmental influences make these converters very reliable. A TDR-2WI converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code DIP models TDR 2-1211WI Order code SMD models TDR 2-1211WISM TDR 2-1212WI TDR 2-1212WISM TDR 2-1213WI TDR 2-1213WISM TDR 2-1222WI TDR 2-1222WISM TDR 2-1223WI Input voltage range Output voltage 5.0 VDC 4.5 – 18 VDC Output current max. 400 mA Efficiency typ. 79 % 12 VDC 167 mA 80 % 15 VDC 134 mA 81 % ±12 VDC ±83 mA 81 % TDR 2-1223WISM ±15 VDC ±67 mA 81 % TDR 2-2411WI TDR 2-2411WISM 5.0 VDC 400 mA 79 % TDR 2-2412WI TDR 2-2412WISM 12 VDC 167 mA 80 % TDR 2-2413WI TDR 2-2413WISM TDR 2-2422WI TDR 2-2422WISM TDR 2-2423WI (12 VDC nominal) 9 – 36 VDC 15 VDC 134 mA 82 % ±12 VDC ±83 mA 80 % TDR 2-2423WISM ±15 VDC ±67 mA 81 % TDR 2-4811WI TDR 2-4811WISM 5.0 VDC 400 mA 78 % TDR 2-4812WI TDR 2-4812WISM 12 VDC 167 mA 81 % TDR 2-4813WI TDR 2-4813WISM 15 VDC 134 mA 82 % TDR 2-4822WI TDR 2-4822WISM ±12 VDC ±83 mA 81 % TDR 2-4823WI TDR 2-4823WISM ±15 VDC ±67 mA 81 % http://www.tracopower.com (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Page 1 of 4

PDF

Документация на серию TMR2WI

datasheet

Дата модификации: 26.04.2013

Размер: 371.3 Кб

4 стр.

DC/DC Converters TMR 2WI Series, 2 Watt RoHS compliant Features ◆ Ultra-wide 4:1 Input Range ◆ SIP-9 Package ◆ Full SMD Design ◆ Temperature Range –40 to +75°C ◆ High Efficiency ◆ Excellent Load and Line Regulation ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 1500 VDC ◆ Remote On/Off Control ◆ Fully RoHS compliant ◆ 3 Year Product Warranty The TMR-2WI series is a new family of isolated 2W dc-dc converter modules with regulated output, featuring ultra-wide 4:1 input voltage ranges of 9-36 VDC or 18-75 VDC. The product comes in a ultra-compact SIP-9 plastic package. An excellent efficiency up to 84% allows –40°c to +75°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. Typical applications for these ultra-compact converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where space on the PCB is critical. Models Ordercode Output voltage Output current max. Efficiency typ. TMR 2-2410WI 3.3 VDC 500 mA 75 % TMR 2-2411WI 5 VDC 400 mA 80 % TMR 2-2412WI TMR 2-2413WI TMR 2-2421WI Input voltage range 9 – 36 VDC (24 VDC nominal) 12 VDC 165 mA 83 % 15 VDC 135 mA 84 % ± 5 VDC ±200 mA 77 % TMR 2-2422WI ±12 VDC ±85 mA 81 % TMR 2-2423WI ±15 VDC ±65 mA 83 % TMR 2-4810WI 3.3 VDC 500 mA 75 % TMR 2-4811WI 5 VDC 400 mA 80 % 12 VDC 165 mA 83 % 15 VDC 135 mA 84 % TMR 2-4812WI TMR 2-4813WI TMR 2-4821WI 18 – 75 VDC (48 VDC nominal) ± 5 VDC ±200 mA 77 % TMR 2-4822WI ±12 VDC ±85 mA 81 % TMR 2-4823WI ±15 VDC ±65 mA 83 % http://www.tracopower.com Page of 3

PDF

Документация на серию TMR2WI

tmr2wi

Дата модификации: 10.12.2008

Размер: 103.9 Кб

3 стр.

DC/DC Converters TMR 2WI Series, 2 Watt RoHS compliant Features ◆ Ultra-wide 4:1 Input Range ◆ SIP-9 Package ◆ Full SMD Design ◆ Temperature Range –40 to +75°C ◆ High Efficiency ◆ Excellent Load and Line Regulation ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 1000VDC ◆ Built-inFilter meets EN 55022, Class A and FCC,Level A ◆ Remote On/Off Control ◆ Fully RoHS compliant ◆ 3 Year Product Warranty The TMR-2WI series is a new family of isolated 2W dc-dc converter modules with regulated output, featuring ultra-wide 4:1 input voltage ranges of 9-36 VDC or 18-75 VDC. The product come in a ultra-compact SIP-9 plastic package. An excellent efficiency up to 84% allows –40°c to +75°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. Typical applications for these ultra-compact converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where space on the PCB is critical. Models Ordercode Output voltage Output current max. Efficiency typ. TMR 2-2410WI 3.3 VDC 500 mA 75 % TMR 2-2411WI 5 VDC 400 mA 80 % TMR 2-2412WI TMR 2-2413WI TMR 2-2421WI Input voltage range 9 – 36 VDC (24 VDC nominal) 12 VDC 165 mA 83 % 15 VDC 135 mA 84 % ± 5 VDC ±200 mA 77 % TMR 2-2422WI ±12 VDC ±85 mA 81 % TMR 2-2423WI ±15 VDC ±65 mA 83 % TMR 2-4810WI 3.3 VDC 500 mA 75 % TMR 2-4811WI 5 VDC 400 mA 80 % 12 VDC 165 mA 83 % 15 VDC 135 mA 84 % TMR 2-4812WI TMR 2-4813WI TMR 2-4821WI 18 – 75 VDC (48 VDC nominal) ± 5 VDC ±200 mA 77 % TMR 2-4822WI ±12 VDC ±85 mA 81 % TMR 2-4823WI ±15 VDC ±65 mA 83 % http://www.tracopower.com Page of 3

PDF

Документация на серию TMR2WI

tmr2wi

Дата модификации: 16.01.2007

Размер: 105.4 Кб

3 стр.

найти TMR 2-2423WI.pdf

Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

DCH010505SN7 (TI) DCP020505U/1K (TI)

TMR 2-2423WI

Технические характеристики

Аналоги 31

Файлы 5

Аналоги ³¹

Файлы ⁵