TMV 1212D

DC/DC конвертор: PCB SIP7; 1 Вт; Выходов 2: 12В / 0.04А, -12В / 0.04А; Вход: 10.8...13.2 [12] В; -40...85 °C

Группа: DC-DC модульные преобразователи
Серия: TMV
Корпус: SIP7
Норма упаковки: 10 шт. (в линейках)

шт в корзину копировать сравнитьтовар в списке сравнения

Технические характеристики

показать свернуть

	Монтаж
	Выходная мощность
	Количество каналов
	Входное напряжение
	Параметры выходов
	Возможности
	Комплекс защит
	Номинальное входное напряжение
	Напряжение 1 выхода
	Напряжение 2 выхода
	Ток 1 выхода
	Ток 2 выхода
	Уровень пульсаций
	КПД
	Напряжение изоляции вход-выход
	Размер	19.5×10.2×6.1 мм
	Рабочая температура

Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги ³³

показать свернуть

Тип	Наименование	Корпус	Упаковка	Защита	U2	U3	I3	Шум	КПД	Паралл. сх.	Uиз. вх-общ	Uиз. вых-общ	Uиз. вых-вых	Серт. медиц.	Примечания
A-	A1212S-1WR2 (MORNSUN)	SIP76	в линейках 200 шт			—	—	—			—	—	—		—
A-	TRV 1-1222M (TRACO)	SIP9				—	—	—		—	—	—	—	—	—
A-	DPRN01M-12 (MW)	SIP7	11 шт												—
A-	DETN01M-12 (MW)	—	в линейках 26 шт			—	—	—			—	—	—		—
A-	A1212S-1WR3 (MORNSUN)	—	в линейках 100 шт			—	—	—			—	—	—		—
A-	TMA 1212D (TRACO)	SIP6	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	RB-1212D (RECOM)	SIP7	25 шт		—	—	—	—			—	—	—		—
A-	E1212S-1WR3 (MORNSUN)	—	в линейках 100 шт			—	—	—			—	—	—		—
A-	RB-1212D/H (RECOM)	SIP76			—	—	—	—	—		—	—	—		—
A-	RB-1212D/P (RECOM)	SIP76			—	—	—	—	—		—	—	—		—
A-	RH-1212D (RECOM)	SIP7	в линейках 25 шт		—	—	—	—			—	—	—		—
A-	RH-1212D/H6 (RECOM)	SIP76	25 шт		—	—	—	—	—		—	—	—		—
A-	RY-1212D (RECOM)	—			—	—	—	—	—		—	—	—		—
A-	RP-1212D (RECOM)	SIP76	в линейках 25 шт		—	—	—	—	—		—	—	—		—
A-	G1212S-1WR2 (MORNSUN)	SIP76	в линейках 100 шт			—	—	—			—	—	—		—
A-	WRE1212S-1WR2 (MORNSUN)	SIP87				—	—	—			—	—	—		—
A-	G1212S-1W (MORNSUN)	SIP76				—	—	—		—	—	—	—	—	—
A-	TMV 1212D EN (TRACO)	SIP76	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TMR 1-1222 (TRACO)	SIP6				—	—	—		—	—	—	—	—	—
A-	TRV 1-1522M (TRACO)	SIP9				—	—	—		—	—	—	—	—	—
A-	TMR 1-1222SM (TRACO)	SMD148	в линейках 10 шт			—	—			—	—	—	—	—	Защита от КЗ: продолжительная с автовосстановлением
A-	TSM 1212D (TRACO)	SMD1810	в линейках 10 шт	короткого замыкания, перенапряжения, перегрева		—	—			—	—	—	—	—	—
A-	TES 1-1222 (TRACO)	SMD8	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TES 1-1222V (TRACO)	SMD1210	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	TMV 1212DEN (TRACO)	SIP7	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	UWE1212S-1WR3 (MORNSUN)	—				—	—	—			—	—	—		—
A-	TBA 1-1222E (TRACO)	—	1 шт			—	—	—		—	—	—	—	—	—
A-	TMV 1212DHI (TRACO)	SIP7				—	—	—		—	—	—	—	—	—
A-	TRA 1-1222 (TRACO)	SIP7				—	—			—	—	—	—	—	—
A-	TMA 1512D (TRACO)	SIP6	в линейках 10 шт			—	—			—	—	—	—	—	—
A-	WRA1212S-1WR2 (MORNSUN)	SIP87	1 шт			—	—	—			—	—	—		—
A-	E1512S-1WR3 (MORNSUN)	—				—	—	—			—	—	—		—
A-	AM1D-1212DH30-NZ (AIMTEC)	SIP7(stand)				—	—				—	—	—		—

Файлы ⁴

показать свернуть

DC/DC Converters TMV Series, 1 Watt Features ◆ Single-in-line (SIL) package ◆ Isolated single and dual output models ◆ I/O isolation 3‘000 VDC ◆ Unregulated device ◆ High Efficiency up to 81% ◆ Extended temperature range –40°C to +85°C ◆ ◆ ◆ ◆ Pin-compatible with other manufacturers 100% Burn-in (8 h) Lead free design, RoHS compliant 3-year product warranty The TMV series are miniature, isolated 1 W DC/DC-converters with high isolation in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD-technology makes it possible to offer a product with high performance at low cost. Models Ordercode Input voltage Output current max. Efficiency typ. 5 VDC 200 mA 71 % TMV 0509S 9 VDC 110 mA 76 % TMV 0512S 12 VDC 84 mA 78 % 15 VDC 67 mA 78 % TMV 0505D ± 5 VDC ±100 mA 72 % TMV 0512D ±12 VDC ±42 mA 78 % TMV 0515D ±15 VDC ±34 mA 79 % TMV 1205S 5 VDC 200 mA 73 % TMV 1212S 12 VDC 84 mA 80 % 15 VDC 67 mA 80 % ± 5 VDC ±100 mA 74 % TMV 1212D ±12 VDC ±42 mA 81 % TMV 1215D ±15 VDC ±34 mA 81 % TMV 2405S 5 VDC 200 mA 71 % TMV 2412S 12 VDC 84 mA 78 % TMV 0505S TMV 0515S TMV 1215S TMV 1205D TMV 2415S 5 VDC ±10% 12 VDC ±10% Output voltage 15 VDC 67 mA 79 % ± 5 VDC ±100 mA 72 % TMV 2412D ±12 VDC ±42 mA 79 % TMV 2415D ±15 VDC ±34 mA 80 % TMV 2405D http://www.tracopower.com 24 VDC ±10% Page 1 of 3

PDF

Документация на TMV 0505D

Дата модификации: 10.01.2022

Размер: 169.3 Кб

3 стр.

Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services

PDF

Рекомендации по промывке и сушке

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TMV Series, 1 Watt Features ◆ Single-in-line (SIL) package ◆ Isolated single and dual output models ◆ I/O isolation 3‘000 VDC ◆ High Efficiency up to 81% ◆ Extended temperature range –40°C to +85°C ◆ ◆ ◆ ◆ Pin-compatible with other manufacturers 100% Burn-in (8 h) Lead free design, RoHS compliant 3-year product warranty The TMV series are miniature, isolated 1 W DC/DC-converters with high isolation in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD-technology makes it possible to offer a product with high performance at low cost. Models Output current max. Efficiency typ. TMV 0505S Ordercode 5 VDC 200 mA 71 % TMV 0512S 12 VDC 80 mA 78 % 15 VDC 65 mA 78 % TMV 0515S Input voltage 5 VDC ±10% Output voltage TMV 0505D ± 5 VDC ±100 mA 72 % TMV 0512D ±12 VDC ± 40 mA 78 % TMV 0515D ±15 VDC ± 30 mA 79 % TMV 1205S 5 VDC 200 mA 73 % TMV 1212S 12 VDC 80 mA 80 % TMV 1215S 12 VDC ±10% 15 VDC 65 mA 80 % TMV 1205D ± 5 VDC ±100 mA 74 % TMV 1212D ±12 VDC ± 40 mA 81 % TMV 1215D ±15 VDC ± 30 mA 81 % TMV 2405S 5 VDC 200 mA 71 % TMV 2412S 12 VDC 80 mA 78 % 15 VDC 65 mA 79 % TMV 2405D ± 5 VDC ±100 mA 72 % TMV 2412D ±12 VDC ± 40 mA 79 % TMV 2415D ±15 VDC ± 30 mA 80 % TMV 2415S http://www.tracopower.com 24 VDC ±10% Page 1 of 3

PDF

Документация на серию TMV

Дата модификации: 14.02.2014

Размер: 193.4 Кб

3 стр.

DC/DC Converters TMV Series, 1 Watt RoHS compliant Features ◆ Single-in-Line (SIL) Package ◆ Isolated Single and Dual Output Models ◆ I/O-Isolation 3‘000 VDC ◆ High Efﬁciency up to 81% ◆ Extended Temperature Range –40°C to +85°C ◆ ◆ ◆ ◆ Pin-compatible with other Manufacturers 100% Burn-in (8 h) Lead free Design, RoHS compliant 3 Year Product Warranty The TMV series are miniature, isolated 1 W DC/DC-converters with high isolation in a Single-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD-technology makes it possible to offer a product with high performance at low cost. Models Output current max. Efﬁciency typ. TMV 0505S Ordercode 5 VDC 200 mA 71 % TMV 0512S 12 VDC 80 mA 78 % 15 VDC 65 mA 78 % TMV 0505D ± 5 VDC ±100 mA 72 % TMV 0512D ±12 VDC ± 40 mA 78 % TMV 0515D ±15 VDC ± 30 mA 79 % TMV 1205S 5 VDC 200 mA 73 % TMV 1212S 12 VDC 80 mA 80 % TMV 0515S TMV 1215S Input voltage 5 VDC ±10% 12 VDC ±10% Output voltage 15 VDC 65 mA 80 % TMV 1205D ± 5 VDC ±100 mA 74 % TMV 1212D ±12 VDC ± 40 mA 81 % TMV 1215D ±15 VDC ± 30 mA 81 % TMV 2405S 5 VDC 200 mA 71 % TMV 2412S 12 VDC 80 mA 78 % 15 VDC 65 mA 79 % TMV 2405D ± 5 VDC ±100 mA 72 % TMV 2412D ±12 VDC ± 40 mA 79 % TMV 2415D ±15 VDC ± 30 mA 80 % TMV 2415S http://www.tracopower.com 24 VDC ±10% Page 1 of 3

PDF

Документация на серию TMV

TMV.indd

Дата модификации: 19.01.2006

Размер: 149.6 Кб

3 стр.

найти TMV 1212D.pdf

Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

DCP010505BP (TI) DCH010505SN7 (TI)

TMV 1212D

Технические характеристики

Аналоги 33

Файлы 4

Аналоги ³³

Файлы ⁴