TRN 1-0511

TRACO
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing...
развернуть ▼ свернуть ▲
Внешний вид серии TRN 1

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 11.9×7.7×11 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- F0505XT-1WR3 (MORNSUN)
 
SMD8 в линейках 760 шт — — — — — — — — —
A- F0505LT-1WR3 (MORNSUN)
 
SMD10 в линейках 3 шт — — — — — — — — —
A- MDD01L-05 (MW)
 
SIP7 11 шт — — — — — — —
A- MDD01M-05 (MW)
 
SIP7 5 шт — — — — — — —
A- MDS01M-05 (MW)
 
SIP7 в линейках 11 шт — — — — — — — — —
A- B1205LS-1WR2 (MORNSUN)
 
SIP76 в линейках 100 шт — — — — — — — — —
A- B1205LS-1WR3 (MORNSUN)
 
— в линейках 200 шт — — — — — — — — —
A- B1205S-1WR2 (MORNSUN)
 
SIP4 1 шт — — — — — — — — —
A- B1205S-1WR3 (MORNSUN)
 
— в линейках 200 шт — — — — — — — — —
A- B1205XT-1WR2 (MORNSUN)
 
SMD8 1 шт — — — — — — — — —
A- B1205XT-1WR3 (MORNSUN)
 
— в линейках 200 шт — — — — — — — — —
A- E0505S-1WR3 (MORNSUN)
 
SIP76 в линейках 200 шт — — — — — — —
A- DETN01L-05 (MW)
 
— 30 шт — — — — — — —
A- A0505XT-1WR3 (MORNSUN)
 
SMD10 в линейках 1000 шт — — — — — — —
A- F0505S-1WR3 (MORNSUN)
 
SIP76 в линейках 40 шт — — — — — — — — —
A- F1205S-1WR3 (MORNSUN)
 
— в линейках 200 шт — — — — — — — — —
A- F1205XT-1WR3 (MORNSUN)
 
— в линейках 200 шт — — — — — — — — —
A- G0505S-1WR2 (MORNSUN)
 
SIP76 160 шт — — — — — — —
A- H1205S-1WR2 (MORNSUN)
 
SIP76 1 шт — — — — — — — — —
A- IB0505LS-1WR3 (MORNSUN)
 
SIP76 в линейках 170 шт — — — — — — — — —
A- IB1205LS-1WR3 (MORNSUN)
 
— в линейках 50 шт
 
 — — — — — — — — —
A- IF1205XT-1WR3 (MORNSUN)
 
— в линейках 50 шт — — — — — — — — —
A- UWF1205S-1WR3 (MORNSUN)
 
— 22 шт — — — — — — — — —
A- A0505S-1WR3 (MORNSUN)
 
SIP76 1 шт — — — — — — —
A- B0505LS-1WR2 (MORNSUN)
 
SIP76 1 шт — — — — — — — — —

Файлы 2

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converter TRN 1 Series, 1 Watt • Compact SIP package 11,9 x 7,7 x 11,0 mm • Fully regulated outputs • Input Voltage range 4.5-13.2, 9-18, 18-36, 36-75 VDC • I/O-isolation 1‘600 VDC • Operating temperature range –40°C to +90°C without derating • Short circuit protection • 3-year product warranty • Designed to meet UL 62368-1 (UL 60950-1) The TRN 1 Series comprises 1 Watt fully regulated, high performance DC/DC converters. They come in a compact cubical package of only 1.00 cm3. Full load operation is reliable up tp 90°C environment temperature. With 1’600 VDC I/Oisolation voltage, and short current protection they cover a wide range of application when space is limited. The input of the converters is designed for a wide voltage range (2:1) and minimum load is not required. The functional I/Oisolation system is designed to meet IEC/EN 62368-1 with a test voltage (60 s) of 1600 VDC. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TRN 1-0510 3.3 VDC 300 mA 77 % TRN 1-0511 5.0 VDC 200 mA 79 % TRN 1-0512 12 VDC 90 mA 81 % 15 VDC 70 mA 82 % TRN 1-0513 4.5 – 13.2 VDC TRN 1-0515 (9 VDC nominal) 24 VDC 45 mA 83 % TRN 1-0521 ± 5.0 VDC ±100 mA 79 % TRN 1-0522 ±12 VDC ±45 mA 83 % TRN 1-0523 ±15 VDC ±35 mA 80 % TRN 1-1210 3.3 VDC 300 mA 77 % TRN 1-1211 TRN 1-1212 TRN 1-1213 TRN 1-1215 TRN 1-1221 Models TRN 1-1222 TRN 1-1223 TRN 1-2410 TRN 1-2411 TRN 1-2412 TRN 1-2413 TRN 1-2415 TRN 1-2421 TRN 1-2422 TRN 1-2423 TRN 1-4810 TRN 1-4811 TRN 1-4812 TRN 1-4813 TRN 1-4815 TRN 1-4821 TRN 1-4822 TRN 1-4823 5.0 VDC 12 VDC 15 VDC 24 VDC ± 5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ± 5.0 VDC ±12 VDC ±15 VDC 3.3 VDC 5.0 VDC 12 VDC 15 VDC 24 VDC ± 5.0 VDC ±12 VDC ±15 VDC 200 mA 90 mA 70 mA 45 mA ±100 mA ±45 mA ±35 mA 300 mA 200 mA 90 mA 70 mA 45 mA ±100 mA ±45 mA ±35 mA 300 mA 200 mA 90 mA 70 mA 45 mA ±100 mA ±45 mA ±35 mA 80 % 81 % 83 % 83 % 79 % 83 % 80 % 77 % 81 % 82 % 83 % 82 % 79 % 82 % 80 % 77 % 78 % 80 % 81 % 81 % 78 % 81 % 79 % www.tracopower.com 9 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Page 1 of 3 PDF
Документация на серию TRN 1 

datasheet

Дата модификации: 28.05.2018

Размер: 186.6 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    DKA30C-15 (MW)