TSM 1205D

DC-DC, 1Вт, Uвх=12В +/-10%, выход +/-5В/+/-100мА, изоляция 1000DC, корпус SMD 15.24x8x6.5мм, -40...+85°С
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, перенапряжения, перегрева
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 15.24×8×6.5 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
P= R1D-1205 (RECOM) SMD8
 
A- TMA 1205D (TRACO) SIP6 в линейках 10 шт
A- TMV 1205D (TRACO) SIP7 в линейках 10 шт короткого замыкания, перенапряжения, перегрева
A- TRA 1-1221 (TRACO) SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 11.8... Защита от КЗ: продолжительная с автовосстановлением
A- MDD01M-05 (MW) SIP7 5 шт
A- RSO-1205DZ (RECOM) SIP87 в линейках 22 шт
A- A1205S-1WR3 (MORNSUN) в линейках 50 шт
A- A1205XT-1WR3 (MORNSUN) в линейках 20 шт
 
A- E1205S-1WR3 (MORNSUN) в линейках 100 шт
A- E1205XT-1WR3 (MORNSUN) в линейках 50 шт
A- TSV 1205D (TRACO) SMD1210 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SMD12; P вых: 1 Вт; #: 2; U вх: 10....
A- TBA 1-1221E (TRACO)
A- TBA 1-1221HI (TRACO)
A- TES 1-1221 (TRACO) SMD8 2 шт
A- TES 1-1221V (TRACO) SMD1210
A- TMV 1205D EN (TRACO) SIP76
A- TMV 1205DEN (TRACO) SIP7 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 10.8...
A- TMV 1205DHI (TRACO) SIP7
A- TRV 1-1221M (TRACO) 1 шт
A- TMV 1505DHI (TRACO) SIP7
A- TRV 1-1521M (TRACO) SIP9
A- TMA 1505D (TRACO) SIP6 в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, SIP7; P вых: 1 Вт; #: 2; U вх: 13.5...
A- DPU01M-05 (MW)
A- DETN01M-05 (MW)
A- RSO-1205DZ/H3 (RECOM)

Файлы 3

показать свернуть
Baar, 11. December 2014 Cleaning Guideline Scope This guideline covers hermetically sealed board mounted Traco converters. We do not recommend washing insert moulded products, where it is difficult to get them dry inside. Please check also, if there is an additional comment about washing in the datasheet or application note of the concerned product. Note: We do generally not recommend washing or cleaning electronic components. You should avoid it, if it is not absolutely necessary. It may reduce the reliability of the involved components in your application. Board cooling prior to cleaning process Converters and their associated application PCB assemblies should not be wash-cleaned after soldering until they had the opportunity to cool within the cleaning solution temperature. This will prevent vacuum absorption of the cleaning liquid into the module between the pins and the potting during cooling. Cleaning agents Cleaning method Classification Cleaning agents Water type Deionized water Ultrasonic wave Solvent type IPA Note: In general, the liquid temperature shall be less than 60°C. Cleaning process In aqueous cleaning, it is preferred to have an in-line cleaner system consisting of several cleaning stages (prewash, wash, rinse, final rinse, and drying). Deionised (DI) water is recommended for aqueous cleaning; the minimum resistively level is 1MΩ-cm. Tap-water quality varies per region in terms of hardness, chloride, and solid contents. Therefore, the use of tap water is not recommended for aqueous cleaning. Note: The total time of ultrasonic wave shall be less than 3 minutes. Drying After cleaning, assure that everything will be dry enough, that the moisture and other potential contaminants will not be present anymore. Use an air circulating chamber (e.g. 0.5-0.7m3/s) and thermal oven at 80-100°C (during 20-120min, depending on assembling, structure, components). Handheld air guns are not recommended. It is on customer’s own responsibility to ensure all components are dry. Product post-wash external appearance The marking or date-code may fade or disappear after cleaning. That does not concern the performance of the converter. Andreas Flühler, Head of Technical Services PDF
Рекомендации по промывке и сушке 

Cleaning Guideline

Дата модификации: 02.02.2021

Размер: 79 Кб

1 стр.

DC/DC Converters TSM Series, 1 Watt Features ◆ SMD package (SOIC-14/18) ◆ Construction in lead frame technology ◆ Isolated single and dual output ◆ I/O isolation 1‘000 VDC ◆ High efficiency ◆ Operating temperature –40°C to +85°C ◆ Reflow solder temperature up to 245°C ◆ High accuracy of Pin co-planarity ◆ Available in tape and reel package ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TSM series are isolated DC/DC converters with 1W output power implemented in a molded plastic package with a pin accuracy suitable for automated SMDproduction. The devices can be soldered without any problems in a high temperature lead free solder process. With their small footprint these converters are the economical solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. Models Output current max. Efficiency typ. TSM 0505S Ordercode 5 VDC 200 mA 80 % TSM 0509S 9 VDC 110 mA 78 % TSM 0512S 12 VDC 80 mA 80 % TSM 0515S Input voltage 5 VDC ±10% Output voltage 15 VDC 65 mA 81 % TSM 0505D ±5 VDC ±100 mA 75 % TSM 0512D ±12 VDC ±40 mA 79 % TSM 0515D ±15 VDC ±30 mA 79 % TSM 1205S 5 VDC 200 mA 81 % TSM 1209S 9 VDC 110 mA 78 % TSM 1212S 12 VDC 80 mA 81 % 15 VDC 65 mA 82 % ±5 VDC ±100 mA 75 % TSM 1212D ±12 VDC ±40 mA 80 % TSM 1215D ±15 VDC ±30 mA 80 % TSM 2405S 5 VDC 200 mA 81 % TSM 2409S 9 VDC 110 mA 78 % TSM 2412S 12 VDC 80 mA 81 % TSM 1215S 12 VDC ±10% TSM 1205D TSM 2415S 24 VDC ±10% 15 VDC 65 mA 82 % TSM 2405D ±5 VDC ±100 mA 75 % TSM 2412D ±12 VDC ±40 mA 80 % TSM 2415D ±15 VDC ±30 mA 80 % http://www.tracopower.com Page 1 of 5 PDF
Документация на серию TSM 

Дата модификации: 08.10.2010

Размер: 175.7 Кб

5 стр.

DC/DC Converters TSM Series, 1 Watt RoHS compliant Features ◆ SMD Package (SOIC-14/18) ◆ Construction in Lead Frame Technology ◆ Isolated Single and Dual Output ◆ I/O-Isolation 1‘000 VDC ◆ High Efficiency ◆ Operating Temperature –40°C to +85°C ◆ Reflow Solder Temperature up to 245°C ◆ High Accuracy of Pin Co-Planarity ◆ Available in Tape and Reel Package ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TSM series are isolated DC/DC converters with 1W output power implemented in a molded plastic package with a pin accuracy suitable for automated SMDproduction. The devices can be soldered without any problems in a high temperature lead free solder process. With their small footprint these converters are the economical solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TSM 0505S 5 VDC 200 mA 80 % TSM 0509S 9 VDC 110 mA 78 % TSM 0512S 12 VDC 80 mA 80 % TSM 0515S 5 VDC ±10% 15 VDC 65 mA 81 % TSM 0505D ± 5 VDC ±100 mA 75 % TSM 0512D ±12 VDC ± 40 mA 79 % TSM 0515D ±15 VDC ± 30 mA 79 % TSM 1205S 5 VDC 200 mA 81 % TSM 1209S 9 VDC 110 mA 78 % TSM 1212S 12 VDC 80 mA 81 % 15 VDC 65 mA 82 % ± 5 VDC ±100 mA 75 % TSM 1215S 12 VDC ±10% TSM 1205D TSM 1212D ±12 VDC ± 40 mA 80 % TSM 1215D ±15 VDC ± 30 mA 80 % TSM 2405S 5 VDC 200 mA 81 % TSM 2409S 9 VDC 110 mA 78 % TSM 2412S 12 VDC 80 mA 81 % 15 VDC 65 mA 82 % TSM 2405D ± 5 VDC ±100 mA 75 % TSM 2412D ±12 VDC ± 40 mA 80 % TSM 2415D ±15 VDC ± 30 mA 80 % TSM 2415S http://www.tracopower.com 24 VDC ±10% Page  of 5 PDF
Документация на серию TSM 

Дата модификации: 05.07.2006

Размер: 175 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.