TSP-BCMU360

Battery Controller Module TSP-BCMU360 Series, 360 Watt Features ◆ Universal battery controller module for EMC UL 60950-1 IEC 60950-1 uninterruptable 24 VDC and 48 VDC bus voltage ◆ Redundant inputs for two indepedant sources ◆ Battery protection for over voltage, deep discharge, short circuit and reverse connection ◆ Alarm outputs for input, output and battery condition ◆ Remote On/Off...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Выходная мощность
Входное напряжение
Выходное напряжение
Максимальный выходной ток нагрузки
Ток заряда АКБ
Емкость АКБ
Конструктив
Степень IP
Размер 54×113×110 мм
Рабочая температура
  Особенности: Test Battery, DCout Ok, DCin Ok, Bat Ok, дистанционное ВКЛ-ВЫКЛ, Bat Discharge, температурный датчик
Применение
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Battery Controller Module TSP-BCMU360 Series, 360 Watt Features ◆ Universal battery controller module for EMC UL 60950-1 IEC 60950-1 uninterruptable 24 VDC and 48 VDC bus voltage ◆ Redundant inputs for two indepedant sources ◆ Battery protection for over voltage, deep discharge, short circuit and reverse connection ◆ Alarm outputs for input, output and battery condition ◆ Remote On/Off for battery ◆ Controlled end of charge voltage by temperature sensor ◆ International safety approval package ◆ 3-year product warranty TSP-TS battery temperature sensor (10 kOhm NTC with 2m cable) optional This module provides a professional battery management system to charge and monitor an external 12V lead-acid battery. Together with a power supply of the TSP series or any other stabilized 24 VDC or 48 VDC power supply a perfect DCUPS system can be configured. The connected battery will be charged and held in charged mode by the power supply. In the event of a mains power failure the battery will supply the output power until the battery is discharged. A step up converter is used to maintain the selected output voltage level, Vnom - 6% (typical). To avoid overcharging the battery, an external temperature sensor adjusts the battery voltage automatically to the required end of charge voltage. This can extend the battery life. The battery is protected against deep discharge. Mains power and battery status are monitored regularly and failures indicated by corresponding LED’s and alarm outputs. The module also provides an external On/Off input to switch-off both, power supply and battery. Models Order code Inputs Input voltag range Output Current max.* Output Power max. TSP-BCMU360 2 x 360 W, for any single or two identical 24 VDC or 48 VDC sources 24–28 or 48–56 VDC (range selection with jumper) 24 VDC / 15 A 48 VDC / 7.5A 360 W Back up battery 12V lead acid battery (to purchase on local market) * Maximum current at nominal Vout External Batteries: For external batteries we recommend: Datasheet: www.tracopower.com/products/tsp-panas_072.pdf http://www.tracopower.com Page 1 of 8 PDF
Документация на TSP-BCMU360 

datasheet

Дата модификации: 24.11.2021

Размер: 1019.5 Кб

8 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.