EITX-3000-2N13A1

PC материнская плата PC EITX-3000 форм-фактор Em-ITX
развернуть ▼ свернуть ▲
 

Файлы 1

показать свернуть
Em-ITX Series Board Placement 2 x LVDS 2 x GbE RJ-45 CRT/VGA VIA EITX-3000 Nano™ E Processor-based Em-ITX SBC, with VGA, 2 Gigabit LAN, 2 LVDS, 4 COM, 6 USB, with Built-in DC Power 2 x VIA VT6130 GbE chipset 8-bit Digital I/O 4 x USB 2.0 DDR2 533/667 SDRAM SODIMM 2 x SATA (3 Gbps) Em-IO Expansion Bus Power Input, 2-pole Phoenix Connector, Accept DC 7V~36V 2 x RS-232 (Upper Stack) 1 x Power On/Off switch 1 x Power LED & 1 x HDD LED 2 x USB 2.0 2 x RS-232/422/485 (Lower Stack) Specifications „„ VIA Nano™ E processor (1MB L2 Cache) Part Number Processor System „„ Em-ITX form factor: 17 cm (W) x 12 cm (L) „„ Dual-sided multiple I/O connector coastlines „„ Integrated VIA Chrome9™ HC3, DX9 3D/2D graphics with MPEG-2 and WMV9 decoding acceleration Fintek F81865 LPC I/O 1 x Parallel port Features „„ Em-IO expansion bus socket Memory Graphic Processor Front Side Bus Speed L2 Cache Chipset BIOS System Power Management Technology Max. Capacity Controller Display Memory CRT Interface „„ Two single-channel LVDS display ports LVDS Interface „„ Two Gigabit Ethernets „„ Two RS-232 and two RS232/422/485 Ethernet „„ Six USB ports „„ Fanless and ultra low power consumption HD Audio HD Audio Serial Dual Independent Display Controller Interface Controller Interface USB Serial Ports Parallel Printer Ports DIO Digital I/O Storage interface Serial ATA Compact Flash EITX-3000-1N13A3 EITX-3000-1N10A3 1.3 GHz VIA Nano™ E 1.0 GHz VIA Nano™ E 800 MHz 800 MHz 1 MB 1 MB VIA VX800 Unified Digital Media IGP chipset Award BIOS, 8 MBit SPI Flash BIOS Timers Power On ACPI supported 1 x DDR2 533/667 200-pin SDRAM SODIMM socket Up to 2GB memory size Integrated VIA Chrome9™ HC3 DX9 3D/2D graphics with MPEG-2 WMV9 decoding acceleration Optimized Unified Memory Architecture (UMA), supports up to 256 MB frame buffer using system memory Onboard 1 x VGA connector Pixel Resolution support up to 1920 x 1200 Supports two 24-bit single-channel LVDS interface connectors Up to 1280 x 1024 panel resolution for single channel LVDS LCD Built-in Inverter control signals into the DB-26 connectors Onboard 5 V/3.3 V LCD power switch (default at 3.3 V) Supports CRT + LVDS2, and LVDS1 + LVDS2 at same resolutions, same pixel depths, and same refresh rates 2 x Onboard VIA VT6130 Gigabit Ethernet controllers Supports two RJ-45 connectors. Supports Wake On LAN (WOL) Supports Preboot Execution Environment (PXE) VIA VT1708B High Definition Audio Codec Supports Line-in, Line-out, Mic-in by onboard 2x7-pin headers Six onboard USB ports •• 2 x USB ports (mini-DIN connector) •• 4 x USB ports (pin headers with individual VCC power) Onboard Fintek F81865 LPC I/O controller Supports 4 COM ports of •• 2 x RS-232/422/485 by 2 x DB-9 connectors as COM 1 and COM 2, configurable via BIOS setup •• 2 x RS-232 by 2 x DB-9 connectors of COM 3 ~ 4 Supports RS-485 AutoFlow Control functions of COM1 ~ COM2 1 x PS/2 compatible bi-directional parallel port by onboard 2 x 13-pin headers Onboard 2 x 6-pin headers support 8-bit Digital I/O, and 5V/12V power source 2 x Onboard SATA II (3 Gbps) ports, Maximum data transfer rate up to 300MB/s Only support 2.5” of SATA Hard Disk (no support to 3.5” SATA HDD) 1 x Onboard socket support type I/II CompactFlash disk PDF
Документация на EITX-3000-2N13A1 

Дата модификации: 09.02.2011

Размер: 406.5 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.