594D127X9020R2T

Vishay
Конденсатор танталовый 20 В, 120 мкФ ±10%, корпус R, SMD, -55...125 °C
развернуть ▼ свернуть ▲
Фотография серии 594D

Технические характеристики

показать свернуть
Номинальное напряжение
Номинальная ёмкость
Допуск ёмкости
Код корпуса
Рабочая температура
Ток утечки
Тангенс угла диэлектрических потерь
Эквивалентное последовательное сопротивление
Максимальный ток пульсаций
Монтаж
Особенности Conformal Coated, Max CV, Low ESR
Размер 7.2×6×3.5 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i Напряжение Ёмкость Допуск Корпус T раб Ток утечки tanD ESR Пульсации Монтаж Особенности Карточка
товара
A+ 595D127X0020R2T (VISHAY)
 
—
 
 — —
A+ 594D127X0020R2T (VISHAY)
 
— 1 шт Конденсатор танталовый 20 В 120 мкФ ±20% типоразмер SMD Conformal Coated, Max CV, Low ESR

Файлы 2

показать свернуть
594D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors, TANTAMOUNT™, Conformal Coated, Maximum CV, Low ESR FEATURES • Large capacitance rating range • Lowest ESR for a surface mount tantalum chip Available capacitor • Terminations: 100 % tin (2) standard, Available tin / lead available • 8 mm, 12 mm tape and reel packaging Available available per EIA 481 and reeling per IEC 60286-3. 7" [178 mm] standard. 13" [330 mm] available Available • Case code compatibility with EIA 535BAAC and CECC 30801 • All cases except R case are halogen-free • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40194 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 1.0 μF to 1500 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 50 VDC Equivalent Series Resistance: ESR readings measured at 100 kHz, +25 °C from 3500 m to 30 m Moisture Sensitivity Level 2a Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details ORDERING INFORMATION 594D 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C CASE CODE TERMINATION REEL SIZE AND PACKAGING This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Code table 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) Special order Tape and reel T = 7" [178 mm] reel W = 13" [330 mm] reel Notes • Preferred tolerances and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size • Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. D REF. B J MAX. A J MAX. H CASE CODE B C D R LMAX. 0.158 [4.0] 0.281 [7.1] 0.293 [7.4] 0.283 [7.2] W 0.110 + 0.012 / - 0.016 [2.8 + 0.3 / - 0.4] 0.126 ± 0.012 [3.2 ± 0.3] 0.170 + 0.012 / - 0.024 [4.3 + 0.3 / - 0.6] 0.235 + 0.012 / - 0.024 [6.0 + 0.3 / - 0.6] H 0.075 + 0.012 / - 0.024 [1.9 + 0.3 / - 0.6] 0.098 ± 0.012 [2.5 ± 0.3] 0.110 ± 0.012 [2.8 ± 0.3] 0.136 + 0.012 / - 0.016 [3.5 + 0.3 / - 0.4] A 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] B 0.097 ± 0.016 [2.5 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] DREF. 0.138 [3.5] 0.236 [6.0] 0.253 [6.4] 0.243 [6.2] JMAX. 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note • The anode termination (D less B) will be a minimum of 0.010" [0.25 mm] Revision: 07-Jan-2020 Document Number: 40006 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PDF
Документация на 594D107X0016C2T 

Дата модификации: 14.01.2020

Размер: 394 Кб

20 стр.

594D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated, Maximum CV, Low ESR FEATURES • Large capacitance rating range • Lowest ESR for a surface mount tantalum chip Pb-free capacitor Available • 100 % surge current conditioning for C, D and R RoHS* cases COMPLIANT • Terminations: Tin (2) standard • 8 mm, 12 mm tape and reel packaging available per EIA 481-1 and reeling per IEC 286-3. 7" [178 mm] standard. 13" [330 mm] available • Case code compatibility with EIA 535BAAE and CECC30801 molded chips PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 WVDC to 50 WVDC Equivalent Series Resistance: ESR readings measured at 100 kHz, + 25 °C from 3500 mΩ to 30 mΩ Note: Refer to Doc. 40088 Capacitance Range: 1.0 µF to 1500 µF ORDERING INFORMATION 594D TYPE 477 CAPACITANCE X0 CAPACITANCE TOLERANCE 004 DC VOLTAGE RATING AT + 85 °C R CASE CODE 2 TERMINATION T PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes Table 2 = 100 % Tin 4 = Gold Plated 8 = Solder Plated (60/40) Special Order T = Tape and Reel 7" [178 mm] Reel W = 13" [330 mm] Reel See Tape and Reel Specifications. Note: Preferred Tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] Tantalum Wire Nib Identifies Anode (+) Terminal W L MAX. B D REF. J MAX. J MAX. A H CASE CODE L (MAX.) W H A B D (REF.) J (MAX.) B 0.158 [4.0] 0.281 [7.1] 0.293 [7.5] 0.283 [7.2] 0.110 + 0.012 - 0.016 [2.8 + 0.3 - 0.4] 0.126 ± 0.012 [3.2 ± 0.3] 0.170 + 0.012/- 0.024 [4.3 + 0.3/- 0.6] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.075 + 0.012 - 0.024 [1.9 + 0.3 - 0.6] 0.098 ± 0.012 [2.5 ± 0.3] 0.110 ± 0.012 [2.8 ± 0.3] 0.136 ± 0.012 [3.5 ± 0.3] 0.031 ± 0.012 [0.80 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± .30] 0.097 ± 0.016 [2.5 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] 0.138 [3.5] 0.236 [6.0] 0.253 [6.4] 0.243 [6.2] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] C D R Notes: The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 40006 Revision: 23-Jan-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 85 PDF
Документация на серию 594D 

Дата модификации: 04.09.2008

Размер: 96.8 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    293D104X9035A2TE3 (VISHAY)