595D337X9016R2T

Конденсатор танталовый 16 В, 330 мкФ ±10%, корпус R, -55...125 °C
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Номинальное напряжение
Номинальная ёмкость
Допуск ёмкости
Код корпуса
Рабочая температура
Ток утечки
Тангенс угла диэлектрических потерь
Эквивалентное последовательное сопротивление
Максимальный ток пульсаций
Особенности Conformal Coated, Max CV, Low ESR
Размер 7.2×6×3.5 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i Напряжение Ёмкость Допуск Корпус T раб Ток утечки tanD ESR Пульсации Монтаж Особенности Карточка
товара
A+ TCN4337M016R0070E (AVX)
 
A+ TCN4337M020R0100E (AVX) 30 шт
 

Файлы 2

показать свернуть
595D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT™, Conformal Coated, Maximum CV FEATURES • Large capacitance rating range • Terminations: 100 % tin (2) standard, tin / lead available Available • 8 mm, 12 mm tape and reel packaging available Available per EIA 481 and reeling per IEC 60286-3. 7" [178 mm] standard. 13" [330 mm] available Available • Case code compatibility with EIA 535BAAC and CECC 30801 Available • All cases except R case are halogen-free • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40194 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.1 μF to 1500 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 50 VDC Moisture Sensitivity Level 2a Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details ORDERING INFORMATION 595D TYPE 106 CAPACITANCE X0 CAPACITANCE TOLERANCE 010 DC VOLTAGE RATING AT +85 °C A CASE CODE 2 TERMINATION T REEL SIZE AND PACKAGING This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) Special order Tape and reel T = 7" [178 mm] reel W = 13" [330 mm] reel Note • Preferred tolerances and reel sizes are in bold. We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance, lower ESR (e.g., 594D series), or increased reliability screening (T95 series) DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. B D REF. A J MAX. J MAX. H CASE CODE T S A M B C G D R L MAX. 0.087 [2.2] 0.126 ± 0.012 [3.2 ± 0.3] 0.146 [3.7] 0.142 [3.6] 0.158 [4.0] 0.281 [7.1] 0.221 [5.6] 0.293 [7.4] 0.283 [7.2] W H 0.045 ± 0.012 0.045 ± 0.012 [1.1 ± 0.3] [1.1 ± 0.3] 0.063 ± 0.012 0.052 ± 0.012 [1.6 ± 0.3] [1.3 ± 0.3] 0.072 ± 0.012 0.056 ± 0.012 [1.8 ± 0.3] [1.4 ± 0.3] 0.106 ± 0.012 0.067 ± 0.012 [2.7 ± 0.3] [1.7 ± 0.3] 0.110 + 0.012 / - 0.016 0.075 + 0.012 / - 0.024 [2.8 + 0.3 / - 0.4] [1.9 + 0.3 / - 0.6] 0.126 ± 0.012 0.098 ± 0.012 [3.2 ± 0.3] [2.5 ± 0.3] 0.144 ± 0.016 0.087 max. [3.66 ± 0.4] [2.2 max.] 0.170 + 0.012 / - 0.024 0.110 ± 0.012 [4.3 + 0.3 / - 0.6] [2.8 ± 0.3] 0.235 + 0.012 / - 0.024 0.136 + 0.012 / - 0.016 [6.0 + 0.3 / - 0.6] [3.5 + 0.3 / - 0.4] A 0.016 ± 0.008 [0.4 ± 0.2] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] B 0.042 ± 0.010 [1.07 ± 0.25] 0.078 ± 0.012 [2.0 ± 0.3] 0.085 ± 0.016 [2.2 ± 0.4] 0.080 ± 0.012 [2.0 ± 0.3] 0.097 ± 0.016 [2.5 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.133 ± 0.016 [3.4 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] D REF. 0.063 [1.6] 0.086 [2.2] 0.115 [2.9] 0.107 [2.7] 0.138 [3.5] 0.236 [6.0] 0.173 [4.4] 0.253 [6.4] 0.243 [6.2] J MAX. 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note • The anode termination (D less B) will be a minimum of 0.010" [0.25 mm]. T case = 0.005" [0.13 mm] minimum Revision: 16-Jul-2019 Document Number: 40007 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PDF
Документация на 595D106X9016B2T 

Дата модификации: 22.07.2019

Размер: 445.6 Кб

24 стр.

595D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT™, Conformal Coated, Maximum CV FEATURES • Large capacitance rating range • Terminations: 100 % tin (2) standard, tin / lead available Available • 8 mm, 12 mm tape and reel packaging available Available per EIA 481 and reeling per IEC 60286-3. 7" [178 mm] standard. 13" [330 mm] available. Available • Case code compatibility with EIA 535BAAC and CECC 30801 Available • All cases except R case are halogen-free • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40194 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.1 μF to 1500 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 50 VDC Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. ORDERING INFORMATION 595D TYPE 106 CAPACITANCE X0 CAPACITANCE TOLERANCE 010 DC VOLTAGE RATING AT +85 °C A CASE CODE 2 TERMINATION T REEL SIZE AND PACKAGING This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) Special order Tape and reel T = 7" [178 mm] reel W = 13" [330 mm] reel Note • Preferred tolerances and reel sizes are in bold. We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance, lower ESR (e.g., 594D series), or increased reliability screening (T95 series). DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. B D REF. A J MAX. J MAX. H CASE CODE T S A M B C G D R L MAX. 0.087 [2.2] 0.126 ± 0.012 [3.2 ± 0.3] 0.146 [3.7] 0.142 [3.6] 0.158 [4.0] 0.281 [7.1] 0.221 [5.6] 0.293 [7.4] 0.283 [7.2] W H 0.045 ± 0.012 0.045 ± 0.012 [1.1 ± 0.3] [1.1 ± 0.3] 0.063 ± 0.012 0.052 ± 0.012 [1.6 ± 0.3] [1.3 ± 0.3] 0.072 ± 0.012 0.056 ± 0.012 [1.8 ± 0.3] [1.4 ± 0.3] 0.106 ± 0.012 0.067 ± 0.012 [2.7 ± 0.3] [1.7 ± 0.3] 0.110 + 0.012 / - 0.016 0.075 + 0.012 / - 0.024 [2.8 + 0.3 / - 0.4] [1.9 + 0.3 / - 0.6] 0.126 ± 0.012 0.098 ± 0.012 [3.2 ± 0.3] [2.5 ± 0.3] 0.144 ± 0.016 0.087 max. [3.66 ± 0.4] [2.2 max.] 0.170 + 0.012 / - 0.024 0.110 ± 0.012 [4.3 + 0.3 / - 0.6] [2.8 ± 0.3] 0.235 + 0.012 / - 0.024 0.136 + 0.012 / - 0.016 [6.0 + 0.3 / - 0.6] [3.5 + 0.3 / - 0.4] A 0.016 ± 0.008 [0.4 ± 0.2] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] B 0.042 ± 0.010 [1.07 ± 0.25] 0.078 ± 0.012 [2.0 ± 0.3] 0.085 ± 0.016 [2.2 ± 0.4] 0.080 ± 0.012 [2.0 ± 0.3] 0.097 ± 0.016 [2.5 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.133 ± 0.016 [3.4 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] D REF. 0.063 [1.6] 0.086 [2.2] 0.115 [2.9] 0.107 [2.7] 0.138 [3.5] 0.236 [6.0] 0.173 [4.4] 0.253 [6.4] 0.243 [6.2] J MAX. 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note • The anode termination (D less B) will be a minimum of 0.010" [0.25 mm]. T case = 0.005" [0.13 mm] minimum. Revision: 08-Mar-16 Document Number: 40007 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PDF
Документация на серию 595D 

Дата модификации: 05.03.2017

Размер: 351.8 Кб

25 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.