TR3D107M016C0075

Vishay
Конденсатор танталовый 16 В, 100 мкФ ±20%, корпус J BEND, -55...125 °C
развернуть ▼ свернуть ▲
Внешний вид серии TR3
Фотография серии TR3
 
 

Технические характеристики

показать свернуть
Номинальное напряжение
Номинальная ёмкость
Допуск ёмкости
Код корпуса
Рабочая температура
Ток утечки
Тангенс угла диэлектрических потерь
Эквивалентное последовательное сопротивление
Максимальный ток пульсаций
Размер 7.3×4.3×2.8 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 4

показать свернуть
Тип Наименование Корпус Упаковка i Напряжение Ёмкость Допуск Корпус T раб Ток утечки tanD ESR Пульсации Монтаж Особенности Карточка
товара
P- T491D107M016AT (KEM)
 
— 1 шт Конденсатор танталовый — —
A+ 16TDC100MYF (PAN)
 
TANT73432073X43X20MM 3000 шт
 
 — —
A+ 20TDC100MYF (PAN)
 
— 2500 шт
 
 — —
A+ 25TQC100MD3 (PAN)
 
— 2500 шт
 
 — —

Файлы 1

показать свернуть
TR3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT™, Molded Case, Low ESR FEATURES LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models T Calculators Related Documents Did You Know Technical Notes • Low ESR • 100 % surge current tested Available (C, D, and E case sizes) • Qualified to EIA-717 Available • Molded case available in seven case codes • High ripple current carrying capability • Terminations: 100 % matte tin standard, tin / lead available Available • Compatible with “high volume” automatic pick and place equipment • Compliant terminations • Meets EIA-535-BAAC mechanical and performance requirements • Moisture sensitivity level 1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE / ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40192 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.47 μF to 1000 μF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 4 VDC to 75 VDC APPLICATIONS Note • For recommended voltage derating guidelines see “Typical Performance Characteristics” • • • • • Industrial Telecom infrastructure Consumer Computer General purpose ORDERING INFORMATION TR3 TYPE D CASE CODE 107 CAPACITANCE K CAPACITANCE TOLERANCE 010 DC VOLTAGE RATING AT +85 °C C TERMINATION AND PACKAGING 0100 ESR See Ratings and Case Codes table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). Matte tin C = 7" (178 mm) reel D = 13" (330 mm) reel V = 7" (178 mm) reel, dry pack U = 13" (330 mm) reel, dry pack Maximum 100 kHz ESR in mΩ. See note below. Tin / lead E = 7" (178 mm) reel F = 13" (330 mm) reel T = 7" (178 mm) reel, dry pack W = 13" (330 mm) reel, dry pack Notes • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting • Dry pack as specified in J-STD-033 Revision: 15-Jul-2020 Document Number: 40080 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PDF
Документация на серию TR3 

Дата модификации: 05.05.2021

Размер: 529.7 Кб

29 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    10TPB150ML (PAN)