Серия операционных усилителей TP1564A

3PEAK

Общие характеристики

 Раздел Операционные усилители
Тип ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур

Документация на серию TP1564A

3PEAK TP1561A/ TP1561NA/TP1562A/TP1564A Stable 6MHz, 500μA, RRIO, Precision, Op Amps Features Description  Stable 6 MHz GBWP in VCM from 0V to VS  Excellent EMI Suppress Performance  Offset Voltage: ±400 μV Maximum  Offset Voltage Temperature Drift: 1 μV/°C  Input Bias Current: 1 pA Typical  THD+Noise: -115 dB at 1kHz, -99 dB at 10kHz  High CMRR/PSRR: 110/95 dB  Beyond the Rails Input Common-Mode Range  Outputs Swing to within 3 mV of Each Rail  No Phase Reversal for Overdriven Inputs  High Output Capability: 100mA  Shutdown Current: 0.2 μA (TP1561NA)  Supply Voltage Range: - Single +2.1 V to +6.0 V Supply - Or Dual ±1.05 V to ±3.0 V Supplies The TP156xA series are CMOS single, dual, and quad RRIO op-amps with low offset, low power and stable high frequency response. They incorporate 3PEAK‟s proprietary and patented design techniques to achieve very good AC performance with 6MHz bandwidth, 4.5V/μs slew rate and low distortion while drawing only 500μA of quiescent current per amplifier. The input common-mode voltage range extends 300mV beyond V– and V+, and the outputs swing rail-to-rail. The TP156xA family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve input/output range and performance.  –40°C to 125°C Operation Temperature Range  ESD Rating: 8KV – HBM, 2KV–CDM and 500V–MM  Green, Popular Type Package The TP156xA Op-amps are unity gain stable with any capacitive load. They operate from either single +2.1V to +6.0V supply or dual ±1.05V to ±3.0V supplies. Analog trim and calibration routine reduce input offset voltage to below 400μV, and proprietary precision temperature compensation technique makes offset voltage temperature drift at 1μV/°C. Adaptive biasing and dynamic compensation enables the TP156xA to achieve „THD +Noise‟ for 1kHz/10kHz 2VPP signal at -115dB/ -99dB. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. Applications  Multimedia Audio  Headphone Drivers  LCD Drivers  Photo Diode Pre-amp  Medical Equipments  Portable Devices  ASIC Input or Output  Sensor Interfaces The combination of features makes the TP156xA ideal choices for audio amplification of computers, sound ports, and other consumer Audio. The TP156xA Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in single-supply systems. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. Pin Configuration (Top View) TP1561A 5-Pin SOT23/SC70 -T and -C Suffixes TP1564A TP1562A Out 1 ﹣Vs 2 +In 3 5 14-Pin SOIC/TSSOP 8-Pin SOIC/TSSOP/MSOP ﹢Vs -S and -T Suffixes -S, -T and -V Suffixes 4 -In TP1561NA 6-Pin SOT23 (-T Suffix) Out A 1 ﹣In A 2 ﹢In A 3 ﹣Vs 4 A B 8 ﹢Vs 7 Out B 6 ﹣In B 5 ﹢In B Out A 1 14 Out D ﹣In A 2 13 ﹣In D A ﹢In A 3 12 ﹢In D ﹢Vs 4 11 ﹣Vs ﹢In B 5 10 ﹢In C ﹣In B 6 9 ﹣In C Out B 7 8 Out C B Out 1 6 ﹢Vs ﹣Vs 2 5 SHDN +In 3 4 -In www.3peakic.com.cn D C Rev. B.03 1 PDF
Документация на семейство TP1561A_TP1561NA_TP1562A_TP1564A 

Features

Дата модификации: 18.08.2022

Размер: 1.7 Мб

19 стр.

    Товары серии TP1564A

    Наименование i Упаковка Корпус
    TP1564A-SR (3PEAK)
     
    		SO-14 SOIC14
    TP1564A-TR (3PEAK)
     
     
    		 TSSOP-14