Серия операционных усилителей TP2272

3PEAK

Общие характеристики

 Раздел Операционные усилители
Тип ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур

Документация на серию TP2272

3PEAK TP2271/TP2272 /TP2274 36V Single Supply, 7MHz Bandwidth, RRO Op-amps Features Description  Gain-bandwidth Product: 7MHz  High Slew Rate: 20V/μs  High EMIRR: 84dB at 900MHz  Low Noise: 19 nV/√Hz(f= 1kHz)  Wide Supply Range: 2.7V to 36V The TP2271/TP2272/TP2274 are EMI Hardened 36V CMOS op-amps featuring EMIRR of 84dB at 900MHz. The devices are unity gain stable with 100pF capacitive load and high-speed with a wide 7MHz bandwidth and 20V/μs high slew rate, which makes the devices appropriated for I/V converters.  Low Offset Voltage: 1.0mV Maximum  Low Input Bias Current: 3pA Typical  Below-Ground (V-) Input Capability to -0.3V  Rail-to-Rail Output Voltage Range  High Output Current: 80mA (2.0V Drop)  Unit Gain Stable  3mm*2mm DFN Package for TP2274  –40°C to 125°C Operation Range  Robust 3kV – HBM and 2kV – CDM ESD Rating The TP227x op-amps offer lower noise, offset voltage, offset drift over temperature and bias current. In addition, the devices have better common-mode rejection and slew rates. Applications Digital Servo Control Loops  Machine and Motion Control Devices  Photodiode Pre-amp  Industrial Process Control  Temperature Measurements  Strain Gage Amplifier  Medical Instrumentation The TP2271 is single channel version available in 8-pin SOIC and 5-pin SOT23 packages. The TP2272 is dual channel version available in 8-pin SOIC and MSOP packages. The TP2274 is quad channel version available in 14-pin SOIC, TSSOP and DFN packages. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. Pin Configuration (Top View) TP2271 8-Pin SOIC TP2272 8-Pin SOIC/MSOP/TSSOP (-S Suffix) (-S, -V and -TS Suffixes) NC 1 8 ﹣In 2 7 ﹢In 3 6 ﹣Vs 4 5 NC Out A 1 ﹢Vs ﹣In A 2 Out ﹢In A 3 ﹣Vs 4 NC TP2271 5-Pin SOT23 Out 1 ﹣Vs 2 +In 3 A B ﹢Vs 7 Out B 6 ﹣In B 5 ﹢In B (-S , -T and -F Suffixes) 5 ﹢Vs Out A 1 14 Out D ﹣In A 2 13 ﹣In D ﹢In A 3 12 ﹢In D ﹢Vs 4 11 ﹣Vs ﹢In B 5 10 ﹢In C ﹣In B 6 9 ﹣In C Out B 7 8 Out C A 4 -In B www.3peakic.com.cn EMIRR IN+ vs. Frequency 90 8 TP2274 14-Pin SOIC/TSSOP/DFN (-T Suffix) The TP227x family, exhibiting high input impedance and low noise, is excellent for small signal conditioning for high impedance sources, such as piezoelectric transducers. Because of the micro power dissipation levels, the devices work well in hand held monitoring and remote sensing applications. D C 85 80 EMIRR IN+(dB)  The rail-to-rail output swing and input range that includes V– makes the TP227x ideal choices for interfacing to modern, single-supply and precision data converters. 75 70 65 60 55 50 400 4000 Frequency (MHz) REV C.02 1 PDF
Документация на семейство TP2271_TP2272_TP2274 

Features

Дата модификации: 26.03.2018

Размер: 1.25 Мб

16 стр.

3PEAK TP2271/TP2272 /TP2274 36V Single Supply, 7MHz Bandwidth, RRO Op-amps Features Description The TP2271/TP2272/TP2274 are EMI Hardened 36V CMOS op-amps featuring EMIRR of 84dB at 900MHz. The devices are unity gain stable with 100pF capacitive load and high-speed with a wide 7MHz bandwidth and 20V/μs high slew rate, which makes the devices appropriated for I/V converters.  Gain-bandwidth Product: 7MHz  High Slew Rate: 20V/μs  High EMIRR: 84dB at 900MHz  Low Noise: 19 nV/√Hz(f= 1kHz)  Wide Supply Range: 2.7V to 36V  Low Offset Voltage: 1.0mV Maximum  Low Input Bias Current: 3pA Typical  Below-Ground (V-) Input Capability to -0.3V  Rail-to-Rail Output Voltage Range  High Output Current: 80mA (2.0V Drop)  Unit Gain Stable  3mm*2mm DFN Package for TP2274  –40°C to 125°C Operation Range  Robust 3kV – HBM and 2kV – CDM ESD Rating The TP227x op-amps offer lower noise, offset voltage, offset drift over temperature and bias current. In addition, the devices have better common-mode rejection and slew rates. Applications Digital Servo Control Loops  Machine and Motion Control Devices  Photodiode Pre-amp  Industrial Process Control  Temperature Measurements  Strain Gage Amplifier  Medical Instrumentation The TP2271 is single channel version available in 8-pin SOIC and 5-pin SOT23 packages. The TP2272 is dual channel version available in 8-pin SOIC and MSOP packages. The TP2274 is quad channel version available in 14-pin SOIC, TSSOP and DFN packages. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. Pin Configuration (Top View) TP2271 8-Pin SOIC TP2272 8-Pin SOIC/MSOP (-S Suffix) (-S and -V Suffixes) NC 1 8 NC Out A 1 ﹣In 2 7 ﹢Vs ﹣In A 2 ﹢In 3 6 Out ﹢In A 3 ﹣Vs 4 5 NC ﹣Vs 4 +In 8 ﹢Vs 7 Out B 6 ﹣In B 5 ﹢In B (-T Suffix) (-S , -T and -F Suffixes) 2 ﹣In A 2 3 ﹢In A 3 ﹢Vs 4 ﹢In B 5 ﹣Vs B 90 TP2274 14-Pin SOIC/TSSOP/DFN 1 1 A EMIRR IN+ vs. Frequency TP2271 5-Pin SOT23 Out A Out 5 ﹢Vs A 4 -In B www.3peakic.com.cn The TP227x family, exhibiting high input impedance and low noise, is excellent for small signal conditioning for high impedance sources, such as piezoelectric transducers. Because of the micro power dissipation levels, the devices work well in hand held monitoring and remote sensing applications. 14 Out D 13 ﹣In D 12 ﹢In D 11 ﹣Vs 10 ﹢In C D C ﹣In B 6 9 ﹣In C Out B 7 8 Out C 85 80 EMIRR IN+(dB)  The rail-to-rail output swing and input range that includes V– makes the TP227x ideal choices for interfacing to modern, single-supply and precision data converters. 75 70 65 60 55 50 400 4000 Frequency (MHz) REV B.02 1 PDF
Документация на TP2271-SR 

Features

Дата модификации: 03.01.2017

Размер: 1.37 Мб

16 стр.

    Товары серии TP2272

    Наименование i Упаковка Корпус
    TP2272-SR (3PEAK)
     
    		в ленте 4000 шт SO-8 SOIC8
    TP2272-TSR (3PEAK)
     
    		TSSOP-8
    TP2272-VR (3PEAK)
     
     
    		 uSOP-8 MSOP8