Серия операционных усилителей TPA6581

Общие характеристики

	Раздел	Операционные усилители
	Тип ОУ	Маломощный операционный усилитель
	Кол-во каналов ОУ
	Напряжение питания
	Ток собственного потребления
	Rail-to-Rail выводы
	Частота единичного усиления
	Максимальная скорость нарастания выходного сигнала
	Уровень шума
	Диапазон рабочих температур

Документация на серию TPA6581

TPA6581/TPA6582/TPA6584 5-V, Rail-to-Rail Input/Output, 10-MHz Op Amp Features Description  Supply Voltage: 2.7 V to 5.5 V The TPA658x series of products are CMOS single, dual, and quad RRIO op-amps with low offset, low power, and stable high frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve high-performance AC with 10MHz bandwidth, 8-V/μs slew rate and low distortion while drawing only 1.2 mA of quiescent current per amplifier. The TPA658X devices are suitable for audio and motor control applications.  Offset Voltage: ±2 mV Maximum  Bandwidth: 10 MHz, Slew Rate: 8 V/μs  Low Power: 1.2 mA per channel  Rail-to-Rail Input and Output  Low 1/f Noise: 10 nV/√Hz at 1 kHz  No Significant Output Glitch when Power on and off  –40°C to 125°C Operation Temperature Range Applications  Instrumentation The TP658x series has isolation during power off even when the signal exits on the input pins as there is no ESD diode from the input pins to the positive power supply pin.  Audio  Motor Control  Industrial Control Typical Application Circuit www.3peak.com 1 / 28 Rev.A.4  PDF

Документация на TPA6581-SC5R 

Дата модификации: 14.11.2023

Размер: 1.63 Мб

28 стр.

• найти TPA6581.pdf

Товары серии TPA6581