Серия контроллеров DC двигателей TPM16050

Общие характеристики

	Раздел	Контроллеры DC двигателей
	Корпус	SOT236
	Тип устройства
	Напряжение питания
	Максимальный выходной ток
	Рабочая температура

Документация на серию TPM16050

TPM16050 17V H-Bridge Driver for IR-CUT Features Description ⚫ 17-V H-bridge Driver The TPM16050 is a high-voltage H-bridge driver dedicated for ⚫ MOSFET On-resistance Rds(on) HS + LS 0.85 Ω IR-CUT control in surveillance camera. It is optimized to control ⚫ 0.5-A Max Output Current ⚫ Supports 3-V to 17-V Operating Supply Voltage ⚫ Support 3.3-V, 5-V PWM (IN1/IN2) interface ⚫ Protection ⚫ the IR-CUT with 20Ω impedance and 3.3V, 5V or 12V supply voltage. It can provide up-to 0.5-A drive current. TPM16050 can sustain max 17V supply voltage. It also supports an external 26.9Ω/2.5W resistor in serial of supply pin VM, in order to protect low-voltage loads such as IR- − Undervoltage Lockout (UVLO) − Over-Current Protection (OCP) − Thermal Shutdown (TSD) CUT from voltage over-stress with 12V supply. Internal protection features such as overcurrent protection, short Small Package Footprint − circuit protection undervoltage lockout and over temperature improve reliability of the whole system. SOT23-6 Package Applications ⚫ Surveillance Cameras ⚫ E-Lock ⚫ Consumer devices ⚫ Toys 1 OUT2 IN2 6 IN2 5 IN1 MCU TPM16050 2 M 3 GND IN1 OUT1 VM 4 VM Figure 1 Application Diagram with Direct Supply 5-V Load 1 OUT2 IN2 6 IN2 MCU TPM16050 M 2 3 GND IN1 OUT1 VM 5 IN1 4 12 V 26.9 2.5W Figure 2 Application Diagram with Power Resistor Ballasting www.3peakic.com.cn 1 / 10 Rev. 1.0  PDF

Документация на серию TPM16050 

Дата модификации: 15.03.2022

Размер: 560.2 Кб

10 стр.

• найти TPM16050.pdf

Товары серии TPM16050