Серия DC-DC модульных преобразователей AMSRI-78-NZ

Aimtec

Общие характеристики

 Раздел DC-DC модульные преобразователи
Номинальное входное напряжение
Схема параллельного включения
Сертификаты медицинские
Размер 11.6×7.55×10.41 мм
Рабочая температура

Документация на серию AMSRI-78-NZ

Click on Series name for product info on aimtec.com Series AMSRI-78-NZ Up to 7.5Watt | DC-DC Switching Regulator To be added soon FEATURES:          Short Circuit Protection Thermal Shutdown Non-Isolated Low ripple and noise Pin Compatible to LM78xx Operating temperature -40°C to +85°C Very high efficiency up to 93% Ultra-low no load power consumption Regulated Outputs Models Single output Model Input Voltage Nom/Range (V) Output Voltage (V) Output Current max (mA) Efficiency Vin Min (%) Efficiency Vin Max (%) Max. Capacitive load (µF) 24 / 4.75-36 24 / 6.5-36 12 / 7-31 24 / 12-36 24 / 15-36 12 / 8-24 24 / 19-36 12 / 8-21 3.3 5 -5 9 12 -12 15 -15 500 500 -300 500 500 -150 500 -150 78 82 78 87 89 82 90 82 81 85 81 90 92 85 93 85 680 680 330 680 680 330 680 330 AMSRI-783.3-NZ AMSRI-7805-NZ AMSRI-7809-NZ AMSRI-7812-NZ AMSRI-7815-NZ Note: For higher than 30VDC input, adding 22µF/50V capacitor required. Input Specifications Parameters Voltage range Filter Quiescent current Conditions Typical Maximum See the table above Capacitor Vin=(LL-HL) at 0% load 0.2 Units VDC 1.5 mA Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Thermal shutdown Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Transient response deviation Transient recovery time Conditions Typical Maximum Units 100% load ±2 ±4 % Internal IC junction Vin=(LL-HL) at full load 10-100% load -40°C to +85°C ambient 20MHz Bandwidth, 10 – 100% load Nom Vin, 25% load step change Continuous Auto recovery 170 ±0.2 ±0.4 ±0.02 50 55 0.5 oC ±0.4 ±0.6 250 2 % % %/oC mV p-p mV ms General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 550 850 KHz oC Operating temperature With derating above 71oC -40 to +85 oC Storage temperature -55 to +125 o Max Case temperature 100 C Cooling Free air convection Humidity Non condensing 95 % Case material Black flame retardant and heat resistant plastic (UL94V-0 rated) Weight 2 g Dimensions (L x W x H) 0.46 x 0.30 x 0.40 inches 11.60 x 7.55 x 10.16 mm MTBF >2 000 000 hrs (MIL-HDBK-217F, Ground Benign, t=+25oC) oC Soldering Temperature 1.5 mm from case for 10 sec 260 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R6.B Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only PDF
Документация на AMSRI-7815-NZ 

Microsoft Word - AMSRI-78-NZ

Дата модификации: 22.04.2016

Размер: 113.6 Кб

4 стр.

    Товары серии AMSRI-78-NZ

    Наименование i Упаковка P вых Каналов U вх Выход Возможности U1
    AMSRI-7805-NZ (AIMTEC)
     
     
    		 30 шт DC-DC Regulated Power Supply Module, 2 Output, 4W, Hybrid
    AMSRI-7809-NZ (AIMTEC)
     
     
    		 1 шт DC-DC Regulated Power Supply Module, 1 Output, 4.5W, Hybrid
    AMSRI-7812-NZ (AIMTEC)
     
     
    		 1 шт DC-DC Regulated Power Supply Module, 2 Output, 7.5W, Hybrid
    AMSRI-7815-NZ (AIMTEC)
     
     
    		 DC-DC Regulated Power Supply Module, 2 Output, 7.5W, Hybrid
    AMSRI-783.3-NZ (AIMTEC)
     
     
    		 5 шт DC-DC Regulated Power Supply Module, 1 Output, 1.65W, Hybrid