Серия датчиков давления XGZP160R

CFSensor

Общие характеристики

 Раздел Датчики давления
Тип измеряемого давления
Тип выхода
Точность
Электрическое подключение Монтаж на плату через сквозные отверстия
Тип порта
Напряжение питания
Материал корпуса

Документация на серию XGZP160R

Unamplified Pressure Sensor Series V2.2/2022.02 XGZP160 PRESSURE SENSOR FEATURES ■ Range: -100～0…7kPaG…700kPaG ■ MEMS technology, Solid-state reliability ■ Low cost for high volume application ■ Surface mounting or Through hole soldering ■ For non-corrosive gas or air ■ Working temp.: -30℃～+125℃(-22℉～+257℉) ■ Gage pressure type(Positive&Vacuum Pressure) ■ Easy to use and embed in OEM equipment APPLICATIONS ■ For medical and healthy equipment, e.g. Blood pressure test and monitor, Patient Monitoring, Infusion and Syringe Pumps, Anesthesia machines, Respirators and Ventilators, NPWT, DVT, Catheter, COPD Treatment, Kidney dialysis, Cupping& Cosmetology, Hospital beds, Massage device etc. ■ For white goods and consumer electronics, e.g. Refrigerator, Printer, Humidifier, Washer/Dryer, Coffee machine, Dust collector or Cleaner, Robotic, Sport equipment etc. ■ For more fields, e.g. Air pump, Process control, Pressure switching, HVAC and pneumatic device, Air flow monitor, Automation, Automotive application etc. INTRODUCTION XGZP160 is a surface mounting pressure sensor based on CFSensor silicon based piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 6-pin SOP or DIP. The small size and high reliability of on-chip integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard SOP6 or DIP6 package, XGZP160 is easy for users to install by SMT or through hole board assembly. With good repeatability, linearity, stability and sensibility, XGZP160 is very facile for users to calibrate output & thermal drift and make temperature compensation by using exterior operational amplifier or integrated circuit.(For calibrated pressure sensor if required, please refer to CFSensor pressure sensor module series) The XGZP160 pressure sensor is intended for using with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used. XGZP160_DataSheet_EN_V2.2 www.CFSensor.com 1/9 PDF
Документация на семейство XGZP160 

MDM291选型 Keywords:

Дата модификации: 02.03.2022

Размер: 1.28 Мб

9 стр.

    Товары серии XGZP160R

    Наименование i Упаковка Давление
    XGZP160010DR (CFSENSOR)
     
    XGZP160020DR (CFSENSOR)
     
    XGZP160040DR (CFSENSOR)
     
    		30 шт
    XGZP160101DR (CFSENSOR)
     
    XGZP160201DR (CFSENSOR)