Серия датчиков давления XGZP192

Общие характеристики

Раздел Датчики давления
Тип измеряемого давления
Тип выхода
Точность
Электрическое подключение Монтаж на плату через сквозные отверстия
Тип порта
Напряжение питания

Документация на серию XGZP192

Calibrated Pressure Sensor Series V1.0/202202 XGZP192 PRESSURE SENSOR FEATURES ■ Range: 0~10/50/100/200kPaG ■ MEMS technology, Solid-state reliability ■ Barb inlet pipe ■ Calibrated mV output ■ Temperature compensated ■ Working temp.: -30℃~+125℃(-22℉~+257℉) ■ Gage pressure type(Differential Pressure) ■ Easy to use and embed in OEM equipment APPLICATIONS ■ For medical and healthy equipment, e.g. Patient Monitoring, Infusion and Syringe Pumps, Anesthesia machines, Respirators and Ventilators, NPWT, DVT, Catheter, COPD Treatment, Kidney dialysis, Cupping& Cosmetology, Hospital beds, Massage device etc. ■ For white goods and consumer electronics, e.g. Refrigerator, Printer, Humidifier, Washer/Dryer, Coffee machine, Dust collector or Cleaner, Robotic ,Sport equipment etc. ■ For more fields, e.g. Digital display meter, Air pump, Process control, Pressure switching, HVAC and pneumatic device, Air flow monitor, Automation, Automotive electronic,Intelligent fire control systemetc. INTRODUCTION XGZP192 is a surface mounting pressure sensor based on CFSensor silicon-glass based piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 6-pin SIP housing. The built-in circuit calibrates and compensates the sensor's zero output, full-scale output, temperature drift and other parameters, and generates a high-precision standard voltage output signal proportional to the supply voltage. The small size and high reliability of integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard PIN interface, XGZP192 is easy for users to install by through-hole mounting. The XGZP192 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used. XGZP192_DataSheet_EN_V1.0 www.CFSensor.com 1/7 PDF
Документация на серию XGZP192 

MDM291选型 Keywords:

Дата модификации: 06.05.2022

Размер: 365.6 Кб

7 стр.

    Товары серии XGZP192

    Наименование i Упаковка Давление
    XGZP192010 (CFSENSOR)
     
    5 шт
    XGZP192050 (CFSENSOR)
     
    5 шт
    XGZP192101 (CFSENSOR)
     
    на поддоне 45 шт
    XGZP192201 (CFSENSOR)
     
    1 шт