Серия Интерфейс CAN CA-IF1051S_VS-Q1

Chipanalog

Общие характеристики

 Раздел Интерфейс CAN
Корпус SO-8 SOIC8
Кратковременная импульсная защита ±
Диапазон питающих напряжений

Документация на серию CA-IF1051S_VS-Q1

CA--IF1051S-Q1, CA-IF1051VS-Q1 Version 1.00, 2022/02/09 Shanghai Chipanalog Microelectronics Co., Ltd. CA-IF1051 5Mbps, ±58V Fault Protected CAN Transceiver with CAN FD 1. Features 3. • Meets the ISO 11898-2:2016 and ISO 11898-5:2007 Physical Layer Standards • 'Turbo' CAN:  Support classic CAN and high-speed operation of up to 5Mbps CAN FD (flexible data rate)  Short symmetrical propagation delay and fast loop times for enhanced timing margin • Ideal Passive Behavior When Unpowered  Bus and logic terminals are high impedance (no load)  Power up/down with glitch free operation on bus and RXD output • Integrated Protection Increases Robustness  ±58V fault-tolerant CANH and CANL  ±30V extended common-mode input range (CMR)  Undervoltage protection on VCC supply terminals  Transmitter dominant timeout prevents lockup, data rates down to 5.5kbps  Thermal shutdown The CA-IF1051S-Q1/CA-IF1051VS-Q1 are control area network (CAN) transceivers with integrated protection for industrial applications. This family of devices is designed for using in high-speed CAN FD networks up to 5Mbps data rate, features extended ±58V fault protection on the CAN bus for equipment where overvoltage protection is required. These CAN devices also incorporate an input common-mode range (CMR) of ±30V, exceeding the ISO 11898 specification of -2V to +7V, and well suited for applications where ground planes from different systems are shifting relative to each other. For the CA-IF1051VS-Q1 device, interfacing with CAN protocol controllers is simplified by the 2.5V to 5.5V wide logic-supply voltage range (VIO). • 2.5V to 5.5V Logic-Supply (VIO) Range (CA-IF1051VSQ1 only) • Junction temperatures range of –55°C to 150°C • 8 pin SOIC package • AEC-Q100 (Grade 1) Certified 2. Applications • • • • Body control modules ADAS(Advanced driver assistance system) IVI(In-vechicle Infortainment) Automotive gateway Copyright © 2019, Chipanalog Incorporated Shanghai Chipanalog Microelectronics Co., Ltd. General Description The transmitter include a dominant timeout detection to prevent bus lockup caused by controller error or by a fault on the TXD input. When TXD remains in the dominant state (low) for longer than tDOM, the driver is switched to the recessive state, releasing the bus. In addition, this family of devices features a silent-mode option to disable the transmitter. The CA-IF1051S-Q1/CA-IF1051VS-Q1 are in a standard 8pin SOIC package. Both parts operate over the -55°C to +150°C temperature range. Device Information Part number Package Package size (NOM) CA-IF1051S-Q1 SOIC-8 4.9mm x 3.9mm CA-IF1051VS-Q1 SOIC-8 4.9mm x 3.9mm 1 PDF
Документация на CA-IF1051S-Q1 

Дата модификации: 16.08.2022

Размер: 895.9 Кб

24 стр.

    Товары серии CA-IF1051S_VS-Q1

    Наименование i Упаковка
    CA-IF1051S-Q1 (CHIPANLG)
     
    		в ленте 2500 шт
    CA-IF1051VS-Q1 (CHIPANLG)
     
     
    		 в ленте 2500 шт