Серия Электромеханических реле NX

Forward

Общие характеристики

 Раздел Реле электромеханические
Тип контактов
Размер 15×7.5×9.4 мм
Применение

Документация на серию NX

NX C US E158859 15.0 7.5 9.4 Features DIL pitch terminals . Conforms to FCC Part 68 2.5kV surge and dielectric 1500VAC. High contact capacity 2A/30VDC. Application for telecommunication equipment, office equipment, security alarm systems, measuring instruments, medical monitoring equipment , audio visual equipment, flight simulator, sensor control. Ordering Information NX 2 1 2 12 W 3 4 1 Part number NX 2 Contact arrangement 2:2C 3 Coil rated Voltage(V) DC:3,4.5,5,6,9,12,24 4 Contact Material NIL:AgPd W:AgNi Contact Data Contact Arrangement Contact Material Contact Rating (Resistive) Max. Switching Power Max. Switching Voltage Contact Resistance Operational Electrical Life Mechanical 2C(DPDT(B-M)) (Bifurcated Crossbar) AgPd( Au plated) AgNi( Au plated) 2A/30VDC; 0.5A/125VAC 60W 62.5VA Min. Switching Load 0.01mA/10mV(Reference Value) 220VDC, 250VAC Max. Switching Current:2A 70m Item 4.12 of IEC 61810-7 Item 4.30 of IEC 61810-7 1 105 Item 4.31 of IEC 61810-7 1 108 CAUTION: Relays previously tested or used above 10mA resistive at 6V maximum use in low level applications. DC or peak AC open circuit are not recommended for subsequent Coil Parameter Dash numbers Coil voltage VDC Coil resistance 10% Pick-up voltage VDC(max) (75%of rated voltage ) Drop-out voltage VDC(min) (10% of rated voltage) Coil power W Rated Max. NX2-003 3 4.5 64.3 2.25 0.3 0.14 NX2-004 4.5 6.7 145 3.38 0.45 0.14 NX2-005 5 7.5 178 3.75 0.5 0.14 NX2-006 6 9.0 257 4.50 0.6 0.14 NX2-009 9 13.5 579 6.75 0.9 0.14 NX2-012 12 18.0 1028 9.00 1.2 0.14 NX2-024 24 36.0 2880 18.0 2.4 0.20 Operate time ms 4 Release time ms 4 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 3.Unless otherwise stated, the rated coil voltage specified in coil parameter and its suitable polarity(if applicable) shall be used for all tests and its application to the relay. PDF
Документация на серию NX 

ͼÐÎ1

Дата модификации: 20.04.2022

Размер: 109.7 Кб

2 стр.

    Товары серии NX

    Наименование i Упаковка Uкатушки Pупр(max)
    NX224 (FORWARD)
     
    NX224W (FORWARD)
     
    NX23 (FORWARD)
     
    NX23W (FORWARD)
     
    NX24.5 (FORWARD)
     
    NX24.5W (FORWARD)
     
    NX25 (FORWARD)
     
    NX25W (FORWARD)
     
    NX26 (FORWARD)
     
    NX26W (FORWARD)
     
    NX29 (FORWARD)
     
    NX29W (FORWARD)