Серия батареи прочей GP 13CEBRA

GP Batteries

Общие характеристики

 Раздел Батареи прочие
Типоразмер
Химический состав
Напряжение номинальное
Тип выводов
Размер ø34.2 мм
Температура рабочая
Температура хранения

Документация на серию GP 13CEBRA

Product Specifications Document Number:C001 Model No.:GP13C Revision: 01 Page 1 of 5 1. APPLICABILITY This specification is applicable to Power Plus, GP13C (No Mercury added). 2. GENERAL 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Type designation Nominal voltage Chemical system Shape and dimension Weight (reference) Effective period Date code 2.8 Jacket : R20S(IEC/JIS) / 13D(ANSI) : 1.5V : Zinc Chloride : Refer to Drawing 1. : 81 g : 24 months : MM-YYYY (e.g. 01-2013 represents expiry date of January 2013) : Printed tube 3. APPEARANCE There shall be no dirt, scratch or deformation detrimental to practical service in appearance. 4. CELL VOLTAGE 4.1 Test method Method of sampling Voltmeter Test temperature : ISO 2859-1:1999 Level II single sampling normal inspection. : Digital Voltmeter (DVM) with the precision of 1mV (internal resistance not less than 1 MegOhm) : 20±2°C 4.2 Open-circuit Voltage (OCV) 4.3 Initial 12 months 1.60 ～ 1.725V 1.56 ～1.725V Closed-circuit Voltage (CCV) Initial 12 months Above 1.48V Above 1.42V Load resistance : 3.9 ohm ±0.5% (measure time : 0.3 seconds) *The initial OCV & CCV test shall commence within 60 days of manufacture, during 61 days ~12 months storage the OCV &CCV accept/reject according to 12 months. During this period, the cells shall be stored under room temperature conditions.(20±2°C and 60±15% relative humidity) PDF
Документация на GP 13CEBRA-2S2 20/200 

Дата модификации: 11.09.2013

Размер: 99.7 Кб

5 стр.

    Товары серии GP 13CEBRA

    Наименование i Упаковка
    GP13CEBRA-2S2 (GP)