Серия DC-DC модульных преобразователей HLK-B_S-2WR3

Hi-Link

Общие характеристики

 Раздел DC-DC модульные преобразователи
Серия
Монтаж
Выходная мощность
Количество каналов
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 19.5×7×10 мм
Рабочая температура

Документация на серию HLK-B_S-2WR3

DC/DC Power Module HLK-B_S-2WR3 Series 2W, constant voltage input, isolated unregulated single output DC DC power module Typical performance    Constant voltage input, isolated unregulated output 2W power Isolation Voltage: 1500VDC Low no-load power consumption: 0.025W (Typ.)     Efficiency: up to 90% (Typ.) Working temperature: -40℃ ~ +85℃ MTBF≥3.5million hours(3500000Hrs) Output short circuit protection: continuous short circuit protection, automatic recovery    Small SIP Package, Plastic Housing International standard pin method Ripple / Noise ( 20MHz bandwidth ) : 30mVp-p (Typ.) Over temperature protection and output continuous short circuit protection RoHS B_S-2WR3 series-----is a small size, high-efficiency micro-power, constant voltage input, isolated and unregulated single-channel output provided by Hilink to customers.DC/DC module power supply. This series of products is specially designed for applications in on-board power systems that need to generate a set of voltages that are isolated from the input power supply. This product is suitable for:  The voltage of the input power supply is relatively stable (voltage variation range ±10%Vin);  Isolation is required between input and output (isolation voltage≤1500VDC);  The requirements for output voltage stability are not high;  Typical applications: pure digital circuits, general low-frequency analog circuits, relay drive circuits, data exchange circuits, etc. Product coding rules Product selection table Certifi cation Input voltage range(Vdc) Product Model ① Nominal value② (range value) B0503S-2WR3 B0505S-2WR3 B0509S-2WR3 5 （4.5-5.5） B0512S-2WR3 DC/DC Isolated Power Module Output voltage/current Ripple and noise Efficiency @ full load Maximum capacitive load Output voltage (Vdc) Output current (mA) (Max.Min.) Fully loaded (mVp-p) Typ./Max. % (Min./Typ.) uF 3.3 606/60 30/80 80/83 2400 5 400/40 30/80 85/88 2400 9 222/23 30/80 86/88 1000 12 166/17 30/80 87/89 560 Shenzhen Hi-Link Electronic co., Ltd. The copyright and the final interpretation right of the product belong to Shenzhen Hi-Link Electronic co., Ltd. Version: 2021-4 A/0 Page: Page 1; Total 6 Pages PDF
Документация на серию HLK-B_S-2WR3 

Subject:

Дата модификации: 24.05.2022

Размер: 629.8 Кб

6 стр.

    Товары серии HLK-B_S-2WR3

    Наименование i Упаковка U вх Выход U1 I1 КПД
    B0903S-2WR3 (HI-LINK)
     
     
    B0905S-2WR3 (HI-LINK)
     
     
    B0909S-2WR3 (HI-LINK)
     
     
    B0912S-2WR3 (HI-LINK)
     
     
    B0915S-2WR3 (HI-LINK)
     
     
    B0924S-2WR3 (HI-LINK)
     
     
    B1503S-2WR3 (HI-LINK)
     
     
    B1509S-2WR3 (HI-LINK)
     
     
    B1512S-2WR3 (HI-LINK)