Серия DC-DC модульных преобразователей HLK-F_S-1WR3

Hi-Link

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Комплекс защит
Уровень пульсаций
Напряжение изоляции вход-выход
Размер 19.5×6×10 мм
Рабочая температура

Документация на серию HLK-F_S-1WR3

DC/DC Power Moule HLK-F_S-1WR3 Series Typical performance  Features: constant voltage input, isolated unregulated output 1W Isolation Voltage: 3000VDC Low no-load power consumption: 0.025W (Typ.) Efficiency: up to 90% Working temperature:-40℃~+85℃ Failure-free time MTBF≥3.5 million hours (3500000Hrs) Output short circuit protection: continuous short circuit protection, automatic recovery Small SIP Package, Plastic Housing  International standard pin method  Ripple / Noise ( 20MHz bandwidth ) : 30mVp-p (Typ.)        1W, constant voltage input, isolated unregulated single output DC DC power module Over temperature protection and output continuous short circuit protection RoHS F_S-1WR3 series - is our company to provide customers with small size, high efficiency DC/DC micro power module power supply, constant voltage input, isolated and unregulated, single output. This series of products is specially designed for applications in on-board power systems that need to generate a set of voltages that are isolated from the input power supply. This product is suitable for:  The voltage of the input power supply is relatively stable (voltage variation range ±10%Vin);  Isolation is required between input and output (isolation voltage≤3000VDC);  The requirements for output voltage stability are not high;  Typical applications: pure digital circuits, general low-frequency analog circuits, relay drive circuits, data exchange circuits, etc. Product coding rules /(brand name) Product selection table Input voltage range Certifi cation Product Model Output voltage/current ① Nominal value (range value) F0303S-1WR3 F0305S-1WR3 3.3 (2.97~3.63) DC/DC Isolated Power Module ② Ripple and noise Efficiency @ full load Maximum capacitive load Output voltage (Vdc) Output current (mA) (Max.Min.) Fully loaded (mVp-p) Typ./Max. % (Min./Typ. ) uF 3.3 303/30 30/80 78/81 2400 5 200/20 30/80 79/82 2400 Shenzhen Hi-Link Electronic co., Ltd. The copyright and the final interpretation right of the product belong to Shenzhen Hi-Link Electronic co., Ltd. Version: 2021-4 A/0 Page: Page 1; Total 6 Pages PDF
Документация на серию HLK-F_S-1WR3 

Subject:

Дата модификации: 19.05.2022

Размер: 632.6 Кб

6 стр.

    Товары серии HLK-F_S-1WR3

    Наименование i Упаковка U вх Выход U1 I1 КПД
    F0303S-1WR3 (HI-LINK)
     
     
    F0305S-1WR3 (HI-LINK)
     
     
    F0312S-1WR3 (HI-LINK)
     
     
    		 10 шт
    F0503S-1WR3 (HI-LINK)
     
     
    F0505S-1WR3 (HI-LINK)
     
     
    		 в линейках 25 шт
    F0509S-1WR3 (HI-LINK)
     
     
    F0512S-1WR3 (HI-LINK)
     
     
    F0515S-1WR3 (HI-LINK)
     
     
    F0524S-1WR3 (HI-LINK)
     
     
    F1203S-1WR3 (HI-LINK)
     
     
    F1205S-1WR3 (HI-LINK)
     
     
    F1209S-1WR3 (HI-LINK)
     
     
    F1212S-1WR3 (HI-LINK)
     
     
    		 в линейках 25 шт
    F1215S-1WR3 (HI-LINK)
     
     
    F1224S-1WR3 (HI-LINK)
     
     
    F1503S-1WR3 (HI-LINK)
     
     
    F1505S-1WR3 (HI-LINK)
     
     
    F1509S-1WR3 (HI-LINK)
     
     
    		 в линейках 10 шт
    F1512S-1WR3 (HI-LINK)
     
     
    F1515S-1WR3 (HI-LINK)
     
     
    		 30 шт
    F1524S-1WR3 (HI-LINK)
     
     
    F2403S-1WR3 (HI-LINK)
     
     
    F2405S-1WR3 (HI-LINK)
     
     
    		 в линейках 21 шт
    F2409S-1WR3 (HI-LINK)
     
     
    F2412S-1WR3 (HI-LINK)
     
     
    F2415S-1WR3 (HI-LINK)
     
     
    F2424S-1WR3 (HI-LINK)