Серия Электромеханических реле HFKA/HFKA-T

Общие характеристики

	Раздел	Реле электромеханические
	Номинальное напряжение катушки
	Тип тока катушки
	Коммутируемое напряжение AC (пиковое)
	Напряжение изоляции катушка-контакты
	Способ подключения выводов
	Магнитная система катушки

Документация на серию HFKA/HFKA-T

HFK A/H FK A- T AUTOMOTIVE RELAY Features ● 25A motor locked load ● Extremely small relay ● Change-over contact version Single ● Single and twin version available Twin ● Coil wire insulation class H (180 ) Typical Applications ● HFKA-T (reflow soldering version) available Central door lock, Power doors and windows, Indicator lamp control, Seat adjustment, Sunroof motor control, Mirror adjustment, Wiper control ● RoHS & ELV compliant CHARACTERISTICS 1Z (Single), 2Z (Twin) Contact arrangement Typ.: 1.2ms Max.: 10ms HFKA: -40 to 85 HFKA-T: -40 to 125 10Hz to 500Hz 49m/s2 98m/s2 PCB 7) Plastic sealed Flux proofed Single relay: Approx. 4g Twin relay: Approx. 8g Release time 5) 1H (Single), 2H (Twin) Typ.: 50mV (at 10A) Voltage drop (initial) 1) Typ.: 250mV (at 10A) 33.8A 10min/25A long-term (@23 ) Max. continuous current 2) 31A 10min (@ 85 ) HFKA-T:29A 10min (@ 125 ) 30A Max. switching current Max. switching voltage 3) 16VDC 1A 6VDC Min. contact load See "CONTACT DATA" Electrical endurance 1 x 107 OPS (300OPS/min) Mechanical endurance 100M (at 500VDC) Initial insulation resistance between contacts: 500VAC Dielectric strength 4) between coil & contacts: 500VAC Typ.: 2.5ms (at nomi. vol.) Operate time Max.: 10ms (at nomi. vol.) Ambient temperature Vibration resistance 6) Shock resistance 6) Termination Construction Unit weight 1)Initial value,Equivalent to the max. initial contact resistance is 100m (at 1A 6VDC). 2) Test under the following conditions: a. The relay is mounted on the PCB, the coil is applied with 100% rated voltage; b. The PCB board is a double layer board. The thickness of the copper foil is 4 oz (140 µm),the width of each copper foil is 3.76×(1±5%)mm, the length of the copper foil is 50 mm±1 mm, and the Tg value of the PCB board is 150 °C. c. Not suitable for double relay adding load simultaneously. 3) See "Load limit curve" for details. 4) 1min, leakage current less than 1mA. 5) The value is measured when voltage drops suddenly from nominal voltage to 0 VDC and coil is not paralleled with suppression circuit. 6) When non-energized,close time of NO contacts shall not exceed 10µs, When energized, opening time of closed NO contacts shall not exceed 10µs. 7) Since it is an environmental friendly product, please select lead-free solder when welding. The recommended soldering temperature and time is (260 3) , (5 0.3)s. CONTACT DATA 3) Load voltage at 23 Load current A Load type 2) Make Motor 13.5VDC Simulate window operation Simulate motor free operation 1Z, 2Z 1) Break Make 1) NO NC 25 --- 25 --- 25 --- On/Off ratio On s Off s 0.5 9.5 Electrical endurance OPS 5 1 × 10 Contact material AgSnO2 RL-1 0.2 N.O. Stable 10 --- 2.3 Break 25 --- 0.5 27 --- 0.02 Make 1) Transient 17 --- 0.03 Break 8 --- 0.15 4 5 1 × 10 AgSnO2 N.C. M N.O. N.C. RL-2 1.8 5 1 × 10 AgSnO2 HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 29 Load wiring diagram 2018 Rev. 1.00

PDF

Документация на серию HFKA/HFKA-T

HFKA_HFKA-T_en

Дата модификации: 21.03.2019

Размер: 392.6 Кб

8 стр.

найти HFKA/HFKA-T.pdf

Товары серии HFKA/HFKA-T

Наименование	Упаковка	P_упр(max)	U dc	T раб	Размер	Особенности
HFKA-T/012-1ZPT (HONGFA)					14×7.2×13.5 мм
HFKA-T/012-1ZST (HONGFA)					14×7.2×13.5 мм
HFKA-T/012-1ZT (HONGFA)					14×7.2×13.5 мм
HFKA-T/012-1ZTC (HONGFA)					14×7.2×13.5 мм
HFKA-T/012-1ZT[257] (HONGFA)					14×7.2×13.5 мм
HFKA-T/012-2ZPT (HONGFA)					15.4×14×13.5 мм
HFKA-T/012-2ZST (HONGFA)					15.4×14×13.5 мм
HFKA-T/012-2ZT (HONGFA)					15.4×14×13.5 мм
HFKA/012-1ZSPT (HONGFA)					14×7.2×13.5 мм	—
HFKA/012-1ZST (HONGFA)	в линейках 5 шт				14×7.2×13.5 мм
HFKA/012-1ZST[257] (HONGFA)					14×7.2×13.5 мм
HFKA/012-2ZST (HONGFA)	1 шт				15.4×14×13.5 мм
HFKA/012-2ZST[257] (HONGFA)					15.4×14×13.5 мм
HFKA/012-2ZST[555] (HONGFA)					15.4×14×13.5 мм
HFKA/12-1ZSPT (HONGFA)		—	—	—	—	—
HFKA/12-1ZST (HONGFA)		—	—	—	—	—