Серия LED индикаторов KCPSA04123

Общие характеристики

	Раздел	LED индикаторы
	Высота символов
	Количество цифр
	Особенности
	Рабочая температура

Документация на серию KCPSA04123

KCPSA04-123 Surface Mount Display DESCRIPTIONS



PACKAGE DIMENSIONS The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES








t h 0.4 inch character height Low current operation High contrast and light output Categorized for luminous intensity Mechanically rugged Gray face, white segment Package: 400 pcs / reel Moisture sensitivity level: 2a RoHS compliant g in APPLICATIONS



K Home and smart appliances Display time and digital combination Industrial and instrumental applications Numeric status ATTENTION g i r b RECOMMENDED SOLDERING PATTERN (units: mm; tolerance: ± 0.15) Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01") unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SELECTION GUIDE Part Number KCPSA04-123 Emitting Color (Material) ■ Green (AlGaInP) Iv (ucd) @ 10mA [1] Lens Type Description Min. Typ. 5600 11000 Common Anode, Rt. Hand Decimal White Diffused *1400 *3100 Notes: 1. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. © 2021 Kingbright. All Rights Reserved. Spec No: DSAG3290 / 1361000052 Rev No: V.13A Date: 04/13/2021 Page 1 / 4  PDF

Документация на KCPSA04-123 

KCPSA04-123(Ver.13A)

Дата модификации: 13.04.2021

Размер: 1 Мб

4 стр.

• найти KCPSA04123.pdf

Товары серии KCPSA04123