Серия драйверов FET-IGBT MCP14A0154

Microchip

Общие характеристики

 Раздел Драйверы FET-IGBT
Опции Half Bridge Based MOSFET Driver, PDSO8
Рабочая температура

Документация на серию MCP14A0154

MCP14A0153/4/5 1.5A Dual MOSFET Driver with Low Threshold Input and Enable Features General Description • High Peak Output Current: 1.5A (typical) • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • Low Shoot-Through/Cross-Conduction Current in Output Stage • High Capacitive Load Drive Capability: - 1000 pF in 11.5 ns (typical) • Short Delay Times: 25 ns (tD1), 24 ns (tD2) (typical) • Low Supply Current: 750 µA (typical) • Low-Voltage Threshold Input and Enable with Hysteresis • Latch-up Protected: Withstands 500 mA Reverse Current • Space-Saving Packages: - 8-Lead MSOP - 8-Lead SOIC - 8-Lead 2x3 TDFN The MCP14A0153/4/5 devices are high-speed dual MOSFET drivers that are capable of providing up to 1.5A of peak current while operating from a single 4.5V to 18V supply. There are three output configurations available: dual inverting (MCP14A0153), dual non-inverting (MCP14A0154) and complementary (MCP14A0155). These devices feature low shoot-through current, matched rise and fall times and short propagation delays, which make them ideal for high switching frequency applications. Applications • • • • • Switch-Mode Power Supplies (SMPS) Pulse Transformer Drive Line Drivers Level Translator Motor and Solenoid Drive The MCP14A0153/4/5 family of devices offers enhanced control with enable functionality. The active-high enable pins can be driven low to drive the corresponding outputs of the MCP14A0153/4/5 low, regardless of the status of the input pin. An integrated pull-up resistor allows the user to leave the enable pins floating for standard operation. These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against Electrostatic Discharge (ESD), up to 2 kV (HBM) and 200 V (MM). Package Types MCP14A0153 MSOP/SOIC EN A IN A GND IN B 1 2 3 4 MCP14A0155 EN B OUT A VDD OUT A OUT A OUT B OUT B OUT B EN A IN A GND IN B 1 2 3 4 EP 9 MCP14A0155 MCP14A0154 2×3 TDFN* MCP14A0154 8 7 6 5 MCP14A0153 8 7 6 5 EN B OUT A VDD OUT A OUT A OUT B OUT B OUT B * Includes Exposed Thermal Pad (EP); see Table 3-1.  2015-2017 Microchip Technology Inc. DS20005470B-page 1 PDF
Документация на MCP14A0153-E/MS 

MCP14A0153/4/5 Data Sheet Data Sheet

Дата модификации: 17.07.2017

Размер: 835.3 Кб

30 стр.

    Товары серии MCP14A0154

    Наименование i Упаковка Корпус
    MCP14A0154-E/MS (MCRCH)
     
    		uSOP-8 MSOP8
    MCP14A0154-E/SN (MCRCH)
     
    		SO8150
    MCP14A0154T-E/MNY (MCRCH)
     
     
    		 DFN-8 TDFN8
    MCP14A0154T-E/MS (MCRCH)
     
    		uSOP-8 MSOP8
    MCP14A0154T-E/SN (MCRCH)
     
    		SO8150