Серия Микроконтроллерные платы PIC18F16Q40

Общие характеристики

Раздел Микроконтроллерные платы

Документация на серию PIC18F16Q40

PIC18F06/16Q40 14/20-Pin, Low-Power, High-Performance Microcontroller with XLP Technology Introduction The PIC18-Q40 microcontroller family is available in 14/20-pin devices for real-time control applications. This family features a 12-bit ADC with Computation (ADCC) automating Capacitive Voltage Divider (CVD) techniques for advanced capacitive touch sensing, averaging, filtering, oversampling and threshold comparison and two 8-bit DAC modules. The family showcases a 16-bit PWM module which provides dual independent outputs on the same time base. Additional features include vectored interrupt controller with fixed latency for handling interrupts, system bus arbiter, Direct Memory Access (DMA) capabilities, UART with support for asynchronous, DMX, DALI and LIN protocols, SPI, I2C and a programmable 32-bit Cyclic Redundancy Check (CRC) with memory scan. This family also includes memory features such as Memory Access Partition (MAP) to support users in data protection and bootloader applications and Device Information Area (DIA), which stores factory calibration values to help improve temperature sensor accuracy. PIC18-Q40 Family Types Temperature Indicator Peripheral Module Disable Vectored Interrupts 32-Bit CRC with Scanner Windowed Watchdog Timer Direct Memory Access (DMA) UART/ UART with Protocol Support High-Low Voltage Detect Y/Y 12/Y 2/3 3/1 1 1 1 4 11 2 2/1 1 2/1 2/1 4 Y Y Y Y Y 512 Y/Y 18/Y 2/3 3/1 1 1 1 4 17 2 2/1 1 2/1 2/1 4 Y Y Y Y Y © 2020 Microchip Technology Inc. Preliminary Datasheet SPI / I2C Comparator/ Zero-Cross Detect 512 4096 16-Bit Dual PWM/ CCP 4096 64k Data EEPROM (bytes) 64k PIC18F16Q40 Data SRAM (bytes) PIC18F06Q40 Device 8-Bit DAC 12-Bit ADCC (channels) Configurable Logic Cell Numerically Controlled Oscillator Signal Measurement Timer Complimentary Waveform Generator 8-Bit Timer with HLT/ 16-Bit Timers I/O Pins/ Peripheral Pin Select Memory Access Partition/ Device Information Area Program Memory Flash (bytes) Table 1. Devices included in this data sheet DS40002216C-page 1 PDF
Документация на серию PIC18F16Q40 

PIC18F06/16Q40 Datasheet

Дата модификации: 19.10.2020

Размер: 10.67 Мб

929 стр.

8-bit Microcontrollers PIC18-Q40 Product Family Robust MCUs for Compact Embedded Designs Summary The PIC18-Q40 family of Microcontrollers (MCUs) makes it easy for you to customize your next space-constrained design with powerful, highly configurable Core Independent Peripherals (CIPs) and award-winning development tools. The MCUs combine these versatile peripherals with advanced interconnection capabilities to allow the creation of custom application functions—packing a high level of sophistication in a small space. With our comprehensive development tool suite, you can quickly and easily generate application code and customize combinations of CIPs in a Graphical User Interface (GUI) environment. The 14- and 20-pin products are well suited for a wide range of embedded applications including remote medical care, wearables, consumer, automotive, industrial and Internet of Things (IoT). If you need the same level of MCU performance with additional analog features, the PIC18-Q41 MCUs are an ideal solution. Responsive Operation These CIPs enable the MCU to accomplish tasks in hardware while freeing up the CPU to do other tasks or go to sleep to save power. Because they offload timing-critical and coreintensive functions from the CPU, they eliminate the need for additional code and external components, reduce power consumption and allow for deterministic response time and decreased validation time. Improved System Response The PIC18-Q41 family is equipped with four Direct Memory Access (DMA) controllers for data transfers between all memory spaces and peripherals independent of the CPU, thereby enhancing system performance and improving power consumption. Reduce Costs and Board Space The PIC18-Q40 provides four Configurable Logic Cells (CLC) which is a user-configurable peripheral for creating custom hardware-based logic functions. The CLC peripheral lets you specify combinations of signals as inputs to a logic function and internally connects peripherals such as timers, Pulse-Width Modulators (PWMs), serial ports and I/O pins for hardware customization with unprecedented ease. The CLC enables a higher level of integration without any external components, thus reducing PCB footprint and system costs. www.microchip.com/8bit Furthermore, the small 3 × 3 mm VQFN package option enables you to create extremely compact designs which reduces board space. Flexibility The integrated 16-bit PWMs deliver advanced capabilities beyond those found on standard PWM modules. These innovative features allow you to easily vary phase, duty cycle and offset event count with greater precision. The high-resolution PWMs offer dual independent outputs on the same time base, which helps simplify drive control and offers the flexibility to be used in many applications. Additionally, the PIC18-Q40 family of MCUs has improved and flexible serial communications interfaces, including a UART with support for Asynchronous, DMX, DALI and LIN protocols along with higher-speed, standalone I2C and SPI serial communication interfaces. Intelligent Analog The PIC18-Q40 family offer intelligent analog peripherals including a Zero Cross Detect (ZCD) module, comparators, two 8-bit Digital-to-Analog Converter (DACs) and a 12-bit Analogto-Digital Converter with Computation (ADCC) that automates Capacitive Voltage Divider (CVD) techniques for implementing advanced touch sensing, averaging, filtering, oversampling and automatic threshold comparison. PDF
Документация на семейство PIC18F-Q40 

Дата модификации: 15.09.2020

Размер: 497.2 Кб

2 стр.

    Товары серии PIC18F16Q40

    Наименование i Упаковка
    EV70C97A (MCRCH)

    PIC18F16Q40 публикации

    19 ноября 2020

    PIC18F-Q41 – первая серия контроллеров в компактном корпусе с операционным усилителем

    Американский производитель Microchip выпустил новую серию микроконтроллеров, построенных на базе ядра PIC. Впервые устройства линейки PIC18 получили операционный усилитель в low–pin корпусах. PIC18F–Q41 – это новая серия контроллеров,... ...читать