Серия акселерометров MC3416

MEMSIC

Общие характеристики

 Раздел Акселерометры
Рабочие оси
Диапазон измерения
Выходной интерфейс
Напряжение питания
Ток потребления
Рабочая температура

Документация на серию MC3416

MC3416 3-Axis Accelerometer GENERAL DESCRIPTION The MC3416 is a small form factor, integrated digital output 3-axis accelerometer with a feature set optimized for cell phones and consumer product motion sensing. Applications include user interface control, gaming motion input, electronic compass tilt compensation for cell phones, game controllers, remote controls and portable media products. The MC3416 features a dedicated motion block which implements algorithms to support “any motion” and shake detection, tilt/flip and tilt 35 position detection. Low power consumption and small size are inherent in the monolithic fabrication approach, where the MEMS accelerometer is integrated in a single-chip with the electronics integrated circuit. In the MC3416 the internal sample rate can be set from 128 to 1024 samples / second. The device supports the reading of sample and event status via polling or interrupts. Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MC3416 APS-045-0020 v2.2 FEATURES Range, Sampling & Power • • • • • ±2, ±4, ±8, ±12, ±16g range 16-bit resolution 128 to 1024 Output Data Rate 4 μA typical Standby current Low typical active current Simple System Integration • • • • I2C interface, up to 1 MHz 2×2×0.92 mm 12-pin LGA package High reliability thru single-chip 3D silicon MEMS technology RoHS compliant Applications • • • • • Wearable IoT & IoMT Remote controls, gaming Vibration in Cell phone VR & game controllers www.memsic.com Page 1 of 54 2021/04 PDF
Документация на MC3416 

MC3416 Datasheet

Дата модификации: 25.05.2023

Размер: 924.9 Кб

54 стр.

MC3416 3-Axis Accelerometer GENERAL DESCRIPTION The MC3416 is a small form factor, integrated digital output 3-axis accelerometer with a feature set optimized for cell phones and consumer product motion sensing. Applications include user interface control, gaming motion input, electronic compass tilt compensation for cell phones, game controllers, remote controls and portable media products. The MC3416 features a dedicated motion block which implements algorithms to support “any motion” and shake detection, tilt/flip and tilt 35 position detection. Low power consumption and small size are inherent in the monolithic fabrication approach, where the MEMS accelerometer is integrated in a single-chip with the electronics integrated circuit. In the MC3416 the internal sample rate can be set from 128 to 1024 samples / second. The device supports the reading of sample and event status via polling or interrupts. Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. FEATURES Range, Sampling & Power • • • • • ±2, ±4, ±8, ±12, ±16g range 16-bit resolution 128 to 1024 Output Data Rate 4 μA typical Standby current Low typical active current Simple System Integration • • • • I2C interface, up to 1 MHz 2×2×0.92 mm 12-pin LGA package High reliability thru single-chip 3D silicon MEMS technology RoHS compliant Applications • • • • • Wearable IoT & IoMT Remote controls, gaming Vibration in Cell phone VR & game controllers © MEMSIC Semiconductor (Tianjin) Co., Ltd. Room 4-501, Financial Center, No. 158, West Third Road, Tianjin Airport Economic Zone, Tianjin, China, 300308 Tel: +86 022-59896226 www.memsic.com MEMSIC MC3416 APS-045-0020 v2.1 Page 1 of 54 Formal release date: 2020/08/01 PDF
Документация на серию MC3416 

MC3416 Datasheet

Дата модификации: 24.09.2022

Размер: 818.1 Кб

55 стр.

    Товары серии MC3416

    Наименование i Упаковка
    MC3416 (MEMSIC)
     
    MC3416-P (MEMSIC)
     
    		1 шт

    MC3416 публикации

    17 ноября 2022
    новость

    Акселерометры, магнетометры и датчики Холла MEMSIC доступны со склада КОМПЭЛ

    На склад КОМПЭЛ начали поступать датчики китайского производителя MEMSIC (таблица 1). Датчики движения, выпускаемые этой компанией, такие как MEMS–акселерометры и магнитометры, находят широкое применение в автомобильных навигационных... ...читать