Серия акселерометров MC3632

MEMSIC

Общие характеристики

 Раздел Акселерометры
Рабочие оси
Диапазон измерения
Выходной интерфейс
Напряжение питания
Ток потребления
Рабочая температура

Документация на серию MC3632

MC3632 3-Axis Accelerometer GENERAL DESCRIPTION The MC3632 is an ultra-low power, lownoise, integrated digital output 3-axis accelerometer with a feature set optimized for wearables and consumer product motion sensing. Applications include wearable consumer products, IoT devices, user interface control, gaming motion input, electronic compass tilt compensation for cell phones, game controllers, remote controls and portable media products. FEATURES Low noise and low power are inherent in the monolithic fabrication approach, where the MEMS accelerometer is integrated in a single-chip with the electronics integrated circuit. Range, Sampling & Power  ±2, 4, 8, 12 or 16g ranges  8, 10 or 12-bit resolution with FIFO o 14-bit single samples  Sample rate 14 - 1300 samples/sec o Sample trigger via internal oscillator, clock pin or software command  Sniff and Wake modes o 0.4 μA Sniff current @ 1Hz o Separate or combined sniff/wake  Ultra-Low Power with 32 sample FIFO o 2.0 μA typical current @ 25Hz o 3.5 μA typical current @ 50Hz o 4.8 μA typical current @ 100Hz In the MC3632 the internal sample rate can be set from 14 to 1300 samples / second. Specific tap or sample acquisition conditions can trigger an interrupt to a remote MCU. Alternatively, the device supports the reading of sample and event status via polling. Simple System Integration  I2C interface, up to 1 MHz  SPI Interface, up to 8 MHz  2.0 × 2.0 × 0.94 mm 12-pin package  Single-chip 3D silicon MEMS  Low noise to 2.3mgRMS  ROHS Compliant Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MC3632 APS-048-0056 v1.5 www.memsic.com Page 1 of 84 2021/10 PDF
Документация на серию MC3632 

MC3632 Datasheet

Дата модификации: 16.01.2022

Размер: 1.77 Мб

84 стр.

    Товары серии MC3632

    Наименование i Упаковка
    MC3632 (MEMSIC)
     
     
    		 в ленте 10000 шт

    MC3632 публикации

    17 ноября 2022
    новость

    Акселерометры, магнетометры и датчики Холла MEMSIC доступны со склада КОМПЭЛ

    На склад КОМПЭЛ начали поступать датчики китайского производителя MEMSIC (таблица 1). Датчики движения, выпускаемые этой компанией, такие как MEMS–акселерометры и магнитометры, находят широкое применение в автомобильных навигационных... ...читать