Серия магниточувствительных датчиков MMC3630

MEMSIC

Общие характеристики

 Раздел Датчик магниточувствительный
Тип датчика
Рабочая температура
Монтаж
Применение

Документация на серию MMC3630

h ±30 Gauss, High Performance, Low Cost 3-axis Magnetic Sensor MMC3630KJ FEATURES  Fully integrated 3-axis magnetic sensor and electronic circuits requiring fewer external components  Superior Dynamic Range and Accuracy:  ±30 G FSR with 16 bits operation  1 mG per LSB resolution  2 mG total RMS noise  Enables heading accuracy of 1º  Output data rate up to 600 Hz  Ultra Small Low profile package 1.2x1.2x0.5 mm  Degaussing with built-in SET/RESET function  Eliminates thermal variation induced offset error (Null field output)  Clears the residual magnetization resulting from strong external fields  On-chip sensitivity compensation  On-chip temperature sensor  Motion_Detection and Data_Ready Interrupt  Low power consumption  1 µA power down current  I2C Slave, FAST (≤400 KHz) mode  1.8V single low power supply compatible  Low to 1.2V I2C interface  RoHS compliant  P2P compatible with AK09911 APPLICATIONS  Electronic Compass & GPS Navigation  Position Sensing DESCRIPTION The MMC3630KJ is a complete 3-axis magnetic sensor with on-chip signal processing and integrated I2C bus. The device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources. It can measure Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MMC3630KJ Rev.A FUNCTIONAL BLOCK DIAGRAM magnetic fields within the full scale range of 30 Gauss (G), with 1 mG per LSB resolution at 16 bits operation mode and 2 mG total RMS noise level, enabling heading accuracy of 1º in electronic compass applications. Contact MEMSIC for access to advanced calibration and tilt-compensation algorithms. An integrated SET/RESET function provides for the elimination of error due to Null Field output change with temperature. In addition it clears the sensors of any residual magnetic polarization resulting from exposure to strong external magnets. The SET/RESET function can be performed for each measurement or periodically as the specific application requires. The MMC3630KJ is packaged in an ultra-small low profile BGA package (1.2x 1.2 x 0.5 mm) and with an operating temperature range from -40 C to +85 C. The MMC3630KJ provides an I2C digital output with 400 KHz, fast mode operation. MEMSIC, Inc. One Technology Drive, Suite 325, Andover, MA 01810, USA Tel: +1 978 738 0900 Fax: +1 978 738 0196 www.memsic.com Page 1 of 17 6/30/2016 PDF
Документация на серию MMC3630 

Microsoft Word - MMC3630KJ Rev.A Datasheet

Дата модификации: 08.09.2016

Размер: 464.8 Кб

17 стр.

    Товары серии MMC3630

    Наименование i Упаковка
    MMC3630KJ (MEMSIC)
     
    		в ленте 3000 шт