Серия магниточувствительных датчиков MMC5603

MEMSIC

Общие характеристики

 Раздел Датчик магниточувствительный
Корпус BGA4
Тип датчика
Рабочая температура
Монтаж
Применение

Документация на серию MMC5603

±30 Gauss, Monolithic, High Performance, Low Cost 3-axis Magnetic Sensor MMC5603NJ FEATURES  Monolithic integrated 3-axis AMR magnetic sensor and electronic circuits requiring fewer external components  Superior Dynamic Range and Accuracy:  ±30 G FSR  20bits operation mode  0.0625mG per LSB resolution  2 mG total RMS noise  Enables heading accuracy of 1º  Sensor true frequency response up to 1KHz  Ultra-Small Wafer Level Package 0.8x0.8x0.4 mm  On-chip automatic degaussing with built-in SET/RESET function  Eliminates thermal variation induced offset error (Null field output)  Clears the residual magnetization resulting from strong external fields  On-chip sensitivity compensation  On-chip temperature sensor  Selftest signal available  Data_ready Interrupt (I3C only)  Low power consumption  1 µA power down current  I2C slave, FAST (≤400 KHz) mode  I3C interface available  1.62V to 3.6V wide range single power supply  1.2V logic IO  RoHS compliant APPLICATIONS  Electronic Compass & GPS Navigation  Position Sensing Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MMC5603NJ Rev.B Page 1 of 18 FUNCTIONAL BLOCK DIAGRAM DESCRIPTION The MMC5603NJ is a monolithic complete 3-axis AMR magnetic sensor with on-chip signal processing and integrated digital bus (I2C fast mode and I3C interface), the device can be connected directly to a microprocessor, eliminating the need for A/D converters or timing resources. It can measure magnetic fields within the full scale range of 30 Gauss (G), with up to 0.0625mG per LSB resolution at 20bits operation mode and 2mG total RMS noise level, enabling heading accuracy of 1º in electronic compass applications. Contact MEMSIC for access to advanced calibration and tilt-compensation algorithms. An integrated SET/RESET function provides for the elimination of error due to Null Field output change with temperature. In addition it clears the sensors of any residual magnetic polarization resulting from exposure to strong external magnets. The SET/RESET function can be performed for each measurement or periodically as the specific application requires. The MMC5603NJ is in wafer level package with an ultra-small size of 0.8x 0.8 x 0.4 mm and with an operating temperature range from -40 C to +85 C. www.memsic.com Formal release: 1/17/2022 PDF
Документация на MMC5603NJ 

MMC5603NJ

Дата модификации: 22.01.2023

Размер: 789.5 Кб

18 стр.

    Товары серии MMC5603

    Наименование i Упаковка
    MMC5603NJ (MEMSIC)
     
    		в ленте 10000 шт
    MMC5603NJ-B (MEMSIC)