Серия акселерометров MXR2999E

Общие характеристики

	Раздел	Акселерометры
	Рабочие оси
	Диапазон измерения
	Выходной интерфейс
	Напряжение питания
	Ток потребления
	Рабочая температура

Документация на серию MXR2999E

Low Offset drift, ±0.5g Dual Axis Accelerometer with Ratiometric Output MXR2999E FEATURES Better than 1 mg resolution Dual axis accelerometer fabricated on a monolithic CMOS IC RoHS compliant On-chip mixed mode signal processing No moving parts 50,000 g shock survival rating ±0.4mg/°°C offset drift over temperature 3V to 5.25V single supply continuous operation Small (5mm x 5mm x 2mm) surface mount package Continuous self test Custom programmable specifications Independently axis programmable axes (special order) Internal Oscillator CLK Temperature Sensor TOUT Voltage Reference VREF Continous Self Test Heater Control X axis Low Pass Filter AOUTX Low Pass Filter AOUTY Factory Adjust Offset & Gain Y axis APPLICATIONS 2-AXIS SENSOR Automotive – Vehicle Security/Active Suspension/ABS Headlight Angle Control/Tilt Sensing Security – Gas Line/Elevator/Fatigue Sensing Office Equipment – Computer Peripherals/PDA/Cell Phones/Digital Projectors Gaming – Joystick/RF Interface/Menu Selection/Tilt Sensing White Goods – Spin/Vibration Control VDD Gnd VDA MXR2999E FUNCTIONAL BLOCK DIAGRAM GENERAL DESCRIPTION The MXR2999E is a low noise and low cost, dual axis accelerometer fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed mode signal processing. The MXR2999E measures acceleration with a full-scale range of ±0.5 g and a sensitivity of 1000mV/g @5Vat 25°C. It can measure both dynamic acceleration (e.g., vibration) and static acceleration (e.g., gravity). The MXR2999E design is based on heat convection and requires no solid proof mass. This eliminates stiction and particle problems associated with competitive devices and provides shock survival up to 50,000 g, leading to significantly lower failure rates and lower loss due to handling during assembly. Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MXR2999E Rev.G Sck (optional) Page 1 of 8 The MXR2999E provides two ratiometric analog outputs. The typical noise floor is 0.2 mg/ Hz allowing signals below 1mg to be resolved at 1 Hz bandwidth. The 3dB rolloff of the device occurs at 17 Hz. The offset drift over temperature is ±0.4mg/°C. The MXR2999E is available in a small surface mount package (5mm x 5mm x 2mm). It is hermetically sealed and is operational over a -40°C to +105°C temperature range. It also contains an on-chip temperature sensor and a bandgap voltage reference. Due to the standard CMOS structure of the MXR2999E, additional circuitry can easily be incorporated into custom versions for high volume applications. Contact the factory for more information. MEMSIC, Inc. One Technology Drive Suite 325,Andover MA01810,USA Tel: +1 978 738 0900 Fax: +1 978 738 0196 www.memsic.com 2/26/2007  PDF

Документация на MXR2999EL 

Microsoft Word - MXR2999E Rev.G.doc

Дата модификации: 03.03.2012

Размер: 196.7 Кб

8 стр.

• найти MXR2999E.pdf

Товары серии MXR2999E