Серия DC-DC модульных преобразователей B_M-2WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Комплекс защит
КПД
Напряжение изоляции вход-выход
Размер 11.6×7.55×10.16 мм
Рабочая температура

Документация на серию B_M-2WR3

DC/DC Converter B05_M-2WR3 Series FEATURES 2W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 84%  I/O isolation test voltage: 1.5k VDC  Industry standard pin-out Patent Protection RoHS B05_M-2WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Input Voltage (VDC) Part No. Output Full Load Capacitive Nominal Voltage Current (mA) Efficiency (%) Load (µF) (Range) (VDC) Max./Min. Min./Typ. Max. 5 400/40 77/81 2400 9 222/22 80/84 1000 12 167/17 77/81 560 15 133/13 77/81 560 24 83/8 80/84 220 B0505M-2WR3 B0509M-2WR3 B0512M-2WR3 B0515M-2WR3 5 (4.5-5.5) B0524M-2WR3 Input Specifications Item Operating Conditions Min. Typ. Max. Input Current (full load / no-load) 5VDC input 5VDC/12VDC/15VDC output -- 494/8 520/-- 9VDC/24VDC output -- 477/8 500/-- Reflected Ripple Current* -- 15 -- Surge Voltage(1sec. max.) -0.7 -- 9 Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Voltage Accuracy Linear Regulation Load Regulation Typ. Max. Unit See output regulation curves (Fig. 1) Input voltage change: ±1% 10%-100% load -- -- -- ±1.2 5VDC output -- 11 20 9VDC/12VDC/15VDC output -- 8 15 24VDC output -- 6 15 75 200 mVp-p ±0.02 -- %/℃ Ripple & Noise* 20MHz bandwidth -- Temperature Coefficient Full load -- Short Circuit Protection % Continuous, self-recovery Notes: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 1500 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ 2021.11.17-A/0 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию B_M-2WR3 

B05_M-2WR3 Keywords:

Дата модификации: 23.11.2022

Размер: 1.39 Мб

4 стр.

DC/DC Converter B_M-2WR3 Series FEATURES 2W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 84%  I/O isolation test voltage: 1.5k VDC  Industry standard pin-out Patent Protection RoHS B_M-2WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Output Input Voltage (VDC) Part No. B1203M-2WR3 B1205M-2WR3 B1212M-2WR3 B2405M-2WR3 B2415M-2WR3 Full Load Capacitive Nominal Voltage Current (mA) Efficiency (%) Load (µF) (Range) (VDC) Max./Min. Min./Typ. Max. 3.3 400/40 75/79 2400 12 (10.8-13.2) 24 (21.6-26.4) 5 400/40 78/82 2400 12 167/17 80/84 560 5 400/40 74/80 2400 15 133/13 78/84 560 Input Specifications Item Input Current (full load / no-load) Operating Conditions 12VDC input 24VDC input Min. Typ. Max. 3.3VDC output -- 140/8 147/-- 5VDC output -- 204/8 214/-- 12VDC output -- 199/8 209/-- 5VDC output -- 105/8 113/-- 15VDC output -- 100/8 107/-- Reflected Ripple Current* Surge Voltage(1sec. max.) -- 15 -- 12VDC input -0.7 -- 18 24VDC input -0.7 -- 30 Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Min. Voltage Accuracy Linear Regulation Load Regulation Typ. Max. Unit See output regulation curves (Fig. 1) Input voltage change: ±1% 10%-100% load 3.3VDC output -- -- ±1.5 Others -- -- ±1.2 3.3VDC output -- 10 20 5VDC output -- 7 15 12VDC output -- 7 10 15VDC output -- 4 10 -- % Ripple & Noise* 20MHz bandwidth -- 75 180 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Notes: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. 2021.12.24-A/2 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию B_M-2WR3 

B_M-2WR3 Keywords:

Дата модификации: 24.12.2021

Размер: 1.4 Мб

4 стр.

DC/DC Converter B_M-2WR3 Series FEATURES 2W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 84%  I/O isolation test voltage: 1.5k VDC  Industry standard pin-out Patent Protection RoHS B_M-2WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: pure digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Input Voltage (VDC) Full Load Capacitive Nominal Voltage Current (mA) Efficiency (%) Load (µF) (Range) (VDC) Max./Min. Min./Typ. Max. 12 (10.8-13.2) 3.3 400/40 75/79 2400 5 400/40 74/80 2400 15 133/13 78/84 560 Part No. B1203M-2WR3 B2405M-2WR3 B2415M-2WR3 Output 24 (21.6-26.4) Input Specifications Item Input Current (full load / no-load) Operating Conditions Min. Typ. Max. 3.3VDC output -- 140/8 147/-- 5VDC output -- 105/8 113/-- 15VDC output -- 100/8 107/-- -- 15 -- 12VDC input -0.7 -- 18 24VDC input -0.7 -- 30 12VDC input 24VDC input Reflected Ripple Current* Surge Voltage(1sec. max.) Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Voltage Accuracy Linear Regulation Typ. Max. Unit See output regulation curves (Fig. 1) Input voltage change: ±1% 3.3V output -- -- ±1.5 Others -- -- ±1.2 3.3V output -- 10 20 5V output -- 7 15 15V output -- Load Regulation 10%-100% load -- 4 10 Ripple & Noise* 20MHz bandwidth -- 75 180 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short Circuit Protection % Continuous, self-recovery Notes: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 1500 -- -- VDC 2021.09.22-A/1 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию B_M-2WR3 

B_M-2WR3 Keywords:

Дата модификации: 22.09.2021

Размер: 1.39 Мб

4 стр.

    Товары серии B_M-2WR3

    Наименование i Упаковка U вх Выход Возможности U вх ном. U1 I1
    B0505M-2WR3 (MORNSUN)
     
    		в линейках 40 шт
    B0509M-2WR3 (MORNSUN)
     
    		1 шт
    B0512M-2WR3 (MORNSUN)
     
    		в линейках 1000 шт
    B0515M-2WR3 (MORNSUN)
     
    		28 шт
    B0524M-2WR3 (MORNSUN)
     
    		в линейках 3 шт
    B1203M-2WR3 (MORNSUN)
     
    B1205M-2WR3 (MORNSUN)
     
    		в линейках 50 шт
    B1212M-2WR3 (MORNSUN)
     
    B2405M-2WR3 (MORNSUN)
     
    		в линейках 100 шт
    B2415M-2WR3 (MORNSUN)
     
    		в линейках 97 шт