Серия DC-DC модульных преобразователей B_MT-1WR4

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности компактный дизайн, изолированный
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Размер 9×7×3.1 мм
Рабочая температура

Документация на серию B_MT-1WR4

DC/DC Converter B0505MT-1WR4 FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Ultra-small, ultra-thin DFN package (9.00 x 7.00 x 3.10mm)  Isolation capacitance as low as 8pF  I/O isolation test voltage 3k VDC  Operating ambient temperature range: -40℃ to +125℃  High efficiency up to 85%  Continuous short-circuit protection  AEC-Q100 approved CB Patent Protection RoHS UL 62368-1 EN 62368-1 IEC62368-1 B0505MT-1WR4 are specially designed for applications where an isolated voltage is required in a distributed power supply system and especially suitable in applications such as digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Input Voltage (VDC) Certification UL/EN/IEC Part No. Output Full Load Capacitive Load(µF) 2400 Nominal Voltage Current(mA) (Range) (VDC) Max./Min. Efficiency (%) Min./Typ. 5 (4.5-5.5) 5 200/20 81/85 B0505MT-1WR4 Max. Input Specifications Item Input Current (full load / no-load) Reflected Ripple Current* Surge Voltage (1sec. max.) Operating Conditions Min. Typ. Max. Unit 5VDC input -- 235/7 247/15 mA -- 10 -- mA 5VDC input -0.7 -- 9 VDC Input Filter Capacitance filter Hot Plug Unavailable Note: * Please refer to DC-DC Converter Application Note for detailed description of reflected ripple current testing method. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve (Fig. 1) Linear Regulation Input voltage change: ±1% -- -- 1.2 -- Load Regulation 10%-100% load -- 8 15 % Ripple & Noise* 20MHz bandwidth -- 30 75 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 3000 -- -- VDC 1500 -- -- VAC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 8 -- pF Operating Temperature Derating when operating temperature≥105℃, (see Fig. 2) -40 -- 125 ℃ 2021.09.15-A/3 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на B0505MT-1WR4 

B05xxMT-1WR4 Keywords:

Дата модификации: 15.09.2021

Размер: 2.05 Мб

4 стр.

DC/DC Converter B05xxMT-1WR4 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Ultra-small, ultra-thin DFN package (9.00 x 7.00 x 3.10mm)  Isolation capacitance as low as 8pF  I/O isolation test voltage 3k VDC  Operating ambient temperature range: -40℃ to +125℃  High efficiency up to 85%  Continuous short-circuit protection  Meet IEC62368, UL62368, EN62368 standards Patent Protection RoHS  AEC-Q100 approved (under testing) B05xxMT-1WR4 is designed for use in distributed power supply systems and especially suitable in applications such as digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Input Voltage (VDC) Certification UL/CE/CB (Pending) Part No. Output Full Load Capacitive Load(µF) Max./Min. Efficiency (%) Min./Typ. 200/20 81/85 2400 Nominal Voltage Current(mA) (Range) (VDC) 5 (4.5-5.5) 5 B0505MT-1WR4 Max. Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) 5VDC input Min. Typ. Max. Unit -- 235/7 247/15 mA -- 10 -- mA -0.7 -- 9 VDC Input Filter Capacitance filter Hot Plug Unavailable Note: * Please refer to DC-DC Converter Application Note for detailed description of reflected ripple current testing method. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve (Fig. 1) Linear Regulation Input voltage change: ±1% -- -- 1.2 -- Load Regulation 10%-100% load -- 8 15 % Ripple & Noise* 20MHz bandwidth -- 30 75 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 3000 -- -- VDC 1500 -- -- VAC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 8 -- pF Operating Temperature Derating when operating temperature≥105℃, (see Fig. 2) -40 -- 125 -55 -- 125 Storage Temperature 2020.04.16-A/0 ℃ Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию B_MT-1WR4 

B05xxMT-1WR4 Keywords:

Дата модификации: 17.04.2020

Размер: 1.61 Мб

4 стр.

    Товары серии B_MT-1WR4

    Наименование i Упаковка
    B0505MT-1WR4 (MORNSUN)
     
    		в ленте 400 шт