Серия DC-DC модульных преобразователей CF0505XT-1WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 13.2×11.4×7.25 мм
Рабочая температура

Документация на серию CF0505XT-1WR3

DC/DC Converter CF0505XT-1WR3 FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  Operating ambient temperature range: -40℃ to +105℃  Compact SMD package  I/O isolation test voltage 3.5k VDC  Industry standard pin-out  Meet AEC-Q100 standards RoHS EN 62368-1 Patent Protection  Production process meets IATF16949 system BS EN 62368-1 The CF0505XT-1WR3 is designed for application where isolated output is required from a distributed power system. It can be used in automobile motor control and drive system. Such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Output Input Voltage (VDC) Certification EN/BS EN Part No. Full Load Capacitive Nominal Voltage Current (mA) Efficiency (%) Load (µF) (Range) (VDC) Max./Min. Min./Typ. Max. 5 (4.5-5.5) 5 200/20 78/82 2200 CF0505XT-1WR3 Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) Min. Typ. Max. -- 244/5 257/10 -- 15 -- -- 9 -0.7 Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve(Fig. 1) Linear Regulation Input voltage change: ±1% -- -- 1.2 Load Regulation 10%-100% load -- 10 15 Ripple & Noise* 20MHz bandwidth -- 30 70 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection % Continuous, self-recovery Note:* The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. 3500 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature≥85℃, (see Fig. 2) -40 -- 105 -55 -- 125 -- 15 -- Storage Temperature Case Temperature Rise Ta=25℃ 2022.01.14-A/5 ℃ Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на CF0505XT-1WR3 

CF0505XT-1WR3 Keywords:

Дата модификации: 14.01.2022

Размер: 1.22 Мб

4 стр.

DC/DC Converter CF0505XT-1WR3 FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  Operating ambient temperature range: -40℃ to +105℃  Compact SMD package  I/O isolation test voltage 3.5k VDC  Industry standard pin-out  Meet AEC-Q100 standards  Production process meets IATF16949 system  EN62368 approved Patent Protection RoHS The CF0505XT-1WR3 is designed for application where isolated output is required from a distributed power system. It can be used in automobile motor control and drive system. Such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Input Voltage (VDC) Certification CE Part No. Output Full Load Capacitive Load (µF) Nominal Voltage Current (mA) Efficiency (%) (Range) (VDC) Max./Min. Min./Typ. Max. 5 (4.5-5.5) 5 200/20 78/82 2200 CF0505XT-1WR3 Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) Min. Typ. Max. Unit -- 244/5 257/10 mA -- 15 -- mA -- 9 VDC -0.7 Input Filter Capacitance filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve(Fig. 1) Linear Regulation Input voltage change: ±1% -- -- 1.2 Load Regulation 10%-100% load -- 10 15 % Ripple & Noise* 20MHz bandwidth -- 30 70 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection %/% Continuous, self-recovery Note:* The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. 3500 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature≥85℃, (see Fig. 2) -40 -- 105 -55 -- 125 Storage Temperature Case Temperature Rise Ta=25℃ -- 15 -- Storage Humidity Non-condensing -- -- 95 2019.10.18-A/4 ℃ %RH Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на CF0505XT-1WR3 

CF0505XT-1WR3 Keywords:

Дата модификации: 18.10.2019

Размер: 713 Кб

4 стр.

DC/DC Converter CF0505XT-1WR3 FEATURES 1W, Fixed input voltage, isolated & unregulated single output  Continuous short-circuit protection  Operating temperature range: -40℃ to +105℃  Compact SMD package  Isolation voltage: 3.5K VDC  International standard pin-out  Meet AEC-Q100 standards  The production is controlled by IATF16949 system requirements Patent Protection RoHS The CF0505XT-1WR3 is designed for application where isolated output is required from a distributed power system. It can be used in automobile motor control and drive system. Such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Input Voltage (VDC) Part No. Output Nominal Output Voltage (Range) (VDC) Output Current (mA)(Max./Min.) 5 (4.5-5.5) 5 200/20 CF0505XT-1WR3 Efficiency (%,Min./Typ.) Max. Capacitive Load @ Full Load (µF) 78/82 2200 Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) Min. Typ. Max. Unit -- 244/5 257/10 mA -- 15 -- mA -0.7 -- 9 VDC Input Filter Filter capacitor Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Output Voltage Accuracy Typ. Max. Unit See tolerance envelope curve(Fig. 1) Line Regulation Input voltage change: ±1% -- -- 1.2 %/% Load Regulation 10%-100% load -- 10 15 % Ripple & Noise* 20MHz bandwidth -- 30 70 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short Circuit Protection Continuous, self-recovery Note:*Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation. General Specifications Item Operating Conditions Min. Typ. Max. Unit Insulation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 3500 -- -- VDC Insulation Resistance Input-output, isolation voltage 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature up to 85℃, (see Fig. 2) -40 -- 105 -55 -- 125 Storage Temperature Casing Temperature Rise Ta=25℃ -- 15 -- Storage Humidity Non-condensing -- -- 95 2018.07.11-A/1 ℃ %RH Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию CF0505XT-1WR3 

CF0505XT-1WR3 Keywords:

Дата модификации: 13.07.2018

Размер: 594.7 Кб

3 стр.

DC/DC 模块电源 CF0505XT-1WR3 1W，定电压输入，隔离非稳压单路输出 产品特点  可持续短路保护  工作温度范围: -40℃ to +105℃  小型 SMD 封装  隔离电压 3500VDC  国际标准引脚方式  符合 AEC-Q100 汽车标准（验证中）  产品满足 IATF16949 体系要求 专利保护 RoHS CF0505XT-1WR3 产品是专门针对线路板上分布式电源系统中需要产生一组与输入电源隔离的电源的应用场合而设计的。可运用于汽 车控制与驱动系统如车用通讯系统电机控制器、发动机控制系统、点火系统、电机电压监测、电子油门踏板、汽车轮胎压力检测系统、 车门与尾灯控制器、空调控制以及电池管理系统（BMS）等系统 选型表 输出 输入电压(VDC) 产品型号 标称值 （范围值） 输出电压 (VDC) 输出电流 (mA) (Max./Min.) 效率 (%, Min./Typ.) @满载 5 (4.5-5.5) 5 200/20 78/82 CF0505XT-1WR3 最大容性负载 (µF) 2200 输入特性 项目 工作条件 输入电流（满载/空载） 5VDC 输入 反射纹波电流* 冲击电压(1sec. max.) 5VDC 输入 Min. Typ. Max. 单位 -- 270/5 285/10 mA -- 15 -- mA -0.7 -- 9 VDC 输入滤波器类型 电容滤波 热插拔 不支持 注：*反射纹波电流测试方法详见《DC-DC（定压）模块电源应用指南》。 输出特性 项目 Min. 工作条件 Typ. Max. 单位 见误差包络曲线图（图 1） 输出电压精度 -- -- 1.2 -- 10 15 % --- 30 70 mVp-p ±0.02 -- %/℃ 线性调节率 输入电压变化±1% 负载调节率 10% 到 100% 负载 纹波噪声* 20MHz 带宽 温度漂移系数 满载 -- 短路保护 %/% 可持续短路，自恢复 注：*纹波和噪声的测试方法采用平行线测试法，具体操作方法参见《DC-DC（定压）模块电源应用指南》。 通用特性 Min. 项目 工作条件 绝缘电压 输入-输出，测试时间 1 分钟，漏电流小于 1mA 3500 绝缘电阻 输入-输出，绝缘电压 500VDC 1000 隔离电容 输入-输出，100KHz/0.1V 工作温度 温度≥100℃降额使用，（见图 2） Typ. Max. 单位 -- -- VDC -- -- MΩ -- 20 -- pF -40 -- 105 -55 -- 125 工作时外壳温升 Ta=25℃ -- 15 -- 引脚耐焊接温度 焊点距离外壳 1.5mm,10 秒 -- -- 300 存储湿度 无凝结 -- -- 95 存储温度 ℃ %RH 2018.05.21-A/0 第 1 页 共 3 页 该版权及产品最终解释权归广州金升阳科技有限公司所有 PDF
Документация на CF0505XT-1WR3 

Subject:

Дата модификации: 21.05.2018

Размер: 666.2 Кб

3 стр.

    Товары серии CF0505XT-1WR3

    Наименование i Упаковка
    CF0505XT-1WR3 (MORNSUN)
     
    		в ленте 500 шт