Серия DC-DC модульных преобразователей CFB0505XT-1WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 15.24×8.5×7 мм
Рабочая температура

Документация на серию CFB0505XT-1WR3

DC/DC Converter CFB0505XT-1WR3 FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Continuous short-circuit protection  Operating ambient temperature range: -40℃ to +105℃  Compact SMD package  I/O isolation test voltage 3kVAC/4.2k VDC  Industry standard pin-out  Meets automotive EMC standards Patent Protection RoHS  Meets AEC-Q100 standards（Pending）  EN62368 approved The CFB0505XT-1WR3 is designed for application where isolated output is required from a distributed power system. It can be used in automobile motor control and drive system, such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Input Voltage (VDC) Certification CE Part No. Full Load Capacitive Voltage Current (mA) Efficiency (%) Load (µF) (Range) (VDC) Max./Min. Min./Typ. Max. 5 (4.5-5.5) 5 200/20 78/82 2200 Nominal CFB0505XT-1WR3 Output Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) Min. Typ. Max. Unit -- 244/5 257/10 mA -- 15 -- mA -0.7 -- 9 VDC Input Filter Capacitance filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve(Fig. 1) Linear Regulation Input voltage change: ±1% -- -- Load Regulation 10%-100% load -- 10 15 % Ripple & Noise* 20MHz bandwidth -- 60 100 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection 1.2 -- Continuous, self-recovery Note:* The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Isolation Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. Input-output Electric Strength Test for 1 minute with a leakage current of 5mA max. Insulation Resistance Input-output resistance at 500VDC Isolation Capacitance Input-output capacitance at 100kHz/0.1V Min. Typ. Max. Unit 4200 -- -- VDC 3000 -- -- VAC 1000 -- -- MΩ -- 20 -- pF 2019.08.15-A/1 Page 1 of 4 页 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию CF0505XT_1WR3 

CFB0505XT-1WR3 Keywords:

Дата модификации: 09.10.2019

Размер: 610 Кб

4 стр.

    Товары серии CFB0505XT-1WR3

    Наименование i Упаковка
    CFB0505XT-1WR3 (MORNSUN)