Серия DC-DC модульных преобразователей CF_XT-1WR2

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Размер 12.7×8.3×7 мм
Рабочая температура

Документация на серию CF_XT-1WR2

DC/DC Converter CF0505XT-1WR2 FEATURES 1W, Fixed input voltage, isolated & unregulated single output  Short circuit protection (self-recovery)  Operating temperature range: -50℃ to +125℃  Isolation voltage: 3.5K VDC  Compact SMD package  Internal surface mounted design  International standard pin-out  Components meet AEC-Q100 standards  The production process meet IATF16949 system requirements Patent Protection RoHS The CF0505XT-1WR2 is designed for application where isolated output is required from a distributed power system. It can be used in automobile motor control and drive system. Such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Input Voltage (VDC) Part No. CF0505XT-1WR2 Output Efficiency (%,Min./Typ.) Max. Capacitive Load (Max./Min.) @ Full Load (µF) 200/20 71/75 220 Nominal Output Voltage Output Current (mA) (Range) (VDC) 5 (4.5-5.5) 5 Input Specifications Item Operating Conditions Input Current (full load / no-load) Surge Voltage (1sec. max.) Reflected Ripple Current Min. Typ. Max. Unit -- 267/20 -- mA -0.7 -- 9 VDC -- 15 -- mA Input Filter Capacitor filter Output Specifications Item Operating Conditions Output Voltage Accuracy Min. Typ. Max. Unit See tolerance envelope graph (Fig. 1) Line Regulation Input voltage change: ±1% -- -- Load Regulation 10%-100% load -- 12 -- % Ripple & Noise* 20MHz bandwidth -- 60 120 mVp-p Temperature Drift Coefficient 100% load -- -- ±0.03 %/℃ Output Short Circuit Protection ±1.2 -- Continuous, self-recovery Note: * Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 3500 -- -- VDC Isolation Resistance Input-output, isolation voltage 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF Operating Temperature Derating if the temperature ≥105℃, (see Fig. 2) -50 -- 125 Storage Temperature -55 -- 135 Casing Temperature Rise Ta=25℃ -- 25 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300 2018.04.12-A/5 ℃ Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию CF_XT-1WR2 

CF0505XT-1WR2 Keywords:

Дата модификации: 27.04.2018

Размер: 746.8 Кб

3 стр.

DC/DC Converter CF0505XT-1WR2 FEATURES 1W, Fixed input voltage, isolated & unregulated single output  Short circuit protection (self-recovery)  Operating temperature range: -50℃ to +125℃  Isolation voltage: 3.5K VDC  Compact SMD package  Internal surface mounted design  International standard pin-out  Components meet AEC-Q100 standards Patent Protection RoHS  The production process meet TS16949 system requirements The CF0505XT-1WR2 is designed for application where isolated output is required from a distributed power system. It can be used in automobile motor control and drive system. Such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Input Voltage (VDC) Part No. CF0505XT-1WR2 Output Efficiency (%,Min./Typ.) Max. Capacitive Load (Max./Min.) @ Full Load (µF) 200/20 71/75 220 Nominal Output Voltage Output Current (mA) (Range) (VDC) 5 (4.5-5.5) 5 Input Specifications Item Min. Typ. Max. Unit Input Current (full load / no-load) Operating Conditions 5V input -- 267/20 -- mA Surge Voltage (1sec. max.) 5V input -0.7 -- 9 VDC -- 15 -- mA Reflected Ripple Current Input Filter Capacitor filter Output Specifications Item Operating Conditions Min. Output Voltage Accuracy Typ. Max. Unit See tolerance envelope graph (Fig. 1) Line Regulation Input voltage change: ±1% 5VDC output -- -- ±1.2 -- Load Regulation 10%-100% load 5VDC output -- 12 -- % Ripple & Noise* 20MHz bandwidth -- 60 -- mVp-p Temperature Drift Coefficient 100% load -- -- ±0.03 %/℃ Output Short Circuit Protection Continuous, self-recovery Note: * Ripple and noise tested with “parallel cable” method, please see DC-DC Converter Application Notes for specific operation methods. General Specifications Item Operating Conditions Input-output, with the test time of 1 minute and the leak current lower than 1mA Min. Isolation Resistance Input-output, isolation voltage 500VDC Isolation Capacitance Input-output, 100KHz/0.1V Operating Temperature Derating if the temperature ≥105℃, (see Fig. 2) Isolation Voltage Storage Temperature 3500 Typ. Max. Unit -- -- VDC 1000 -- -- MΩ -- 20 -- pF -50 -- 125 -55 -- 135 Casing Temperature Rise Ta=25℃ -- 25 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300 2015.12.16-A/2 ℃ Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на CF0505XT-1WR2 

Author: eng128

Дата модификации: 16.12.2015

Размер: 927.8 Кб

3 стр.

    Товары серии CF_XT-1WR2

    Наименование i Упаковка
    CF0505XT-1WR2 (MORNSUN)