Серия DC-DC модульных преобразователей E_T_R4


Общие характеристики

Раздел DC-DC модульные преобразователи
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности компактный дизайн, изолированный
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
Напряжение изоляции вход-выход
Размер 13.2×7×3.1 мм
Рабочая температура

Документация на серию E_T_R4

DC/DC Converter E05xxT-1WR4 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated dual output  Ultra-small, ultra-thin DFN package (13.20 x 7.00 x 3.10mm)  Isolation capacitance as low as 15pF  I/O isolation test voltage 3000VDC  Operating ambient temperature range: -40℃ to +125℃  High efficiency up to 87% Patent Protection RoHS  Continuous short-circuit protection  Meet IEC62368, UL62368, EN62368 standards E05xxT-1WR4 series are specially designed for applications where two isolated voltage is required in a distributed power supply system and especially suitable in applications such as digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. Selection Guide Output Input Voltage (VDC) Certification UL/CE/CB (Pending) Part No. Nominal Full Load Capacitive Load(µF) (VDC) Max./Min. Efficiency (%) Min./Typ. ±5 ±100/±10 83/87 1200 Voltage Current(mA) (Range) 5 (4.5-5.5) E0505T-1WR4 Max. * Note: *Each of the two outputs has the same maximum capacitive load. Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) 5VDC input Min. Typ. Max. -- 230/7 241/15 -- 10 -- -0.7 -- 9 Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: * Please refer to DC-DC Converter Application Note for detailed description of reflected ripple current testing method. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve (Fig. 1) Linear Regulation Input voltage change: ±1% -- -- 1.2 -- Load Regulation 10%-100% load -- 8 15 % Ripple & Noise* 20MHz bandwidth --- 30 75 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 3000 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 15 -- pF Operating Temperature Derating when operating temperature≥105℃, (see Fig. 2) -40 -- 125 -55 -- 125 Storage Temperature 2020.08.12-A/0 ℃ Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию E_T_R4 

E05xxT-1WR4 Keywords:

Дата модификации: 14.08.2020

Размер: 2.37 Мб

5 стр.

    Товары серии E_T_R4

    Наименование i Упаковка
    E0505T-1WR4 (MORNSUN)
    1 шт