Серия DC-DC модульных преобразователей F_T_R4

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности компактный дизайн, изолированный
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 13.2×7×3.1 мм
Рабочая температура

Документация на серию F_T_R4

DC/DC Converter FB05xxT-1WR4 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, unregulated single output  Ultra-small, ultra-thin DFN package (13.20 x 7.00 x 3.10mm)  Isolation capacitance as low as 8pF  I/O isolation test voltage 3000VAC/4200VDC  Operating ambient temperature range: -40℃ to +125℃  High efficiency up to 87%  Continuous short-circuit protection Patent Protection RoHS  Meet automotive EMC standards  Meet IEC62368, UL62368, EN62368 standards  AEC-Q100 approved (under testing) FB05xxT-1WR4 is designed for use in distributed power supply systems and especially suitable in applications such as digital circuits, low frequency analog circuits, relay-driven circuits and data switching circuits. It also can be used in automobile motor control and drive system, such as motor vehicle communication system controller, engine control system, the ignition system, the motor voltage monitoring, the electronic accelerator pedal, automobile tire pressure detection system, doors and tail lights controller, air conditioning control and battery management system (BMS), etc. Selection Guide Input Voltage (VDC) Certification UL/CE/CB (Pending) Part No. Output Full Load Capacitive Load(µF) 2400 Nominal Voltage Current(mA) (Range) (VDC) Max./Min. Efficiency (%) Min./Typ. 5 (4.5-5.5) 5 200/20 83/87 FB0505T-1WR4 Max. Input Specifications Item Operating Conditions Input Current (full load / no-load) 5VDC input Reflected Ripple Current* Surge Voltage (1sec. max.) 5VDC input Min. Typ. Max. -- 230/7 241/15 -- 10 -- -- 9 -0.7 Input Filter Unit mA VDC Capacitance filter Hot Plug Unavailable Note: * Please refer to DC-DC Converter Application Note for detailed description of reflected ripple current testing method. Output Specifications Item Operating Conditions Min. Voltage Accuracy Typ. Max. Unit See output regulation curve (Fig. 1) Linear Regulation Input voltage change: ±1% -- -- 1.2 -- Load Regulation 10%-100% load -- 8 15 % Ripple & Noise* 20MHz bandwidth --- 30 75 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 4200 -- -- VDC 3000 -- -- VAC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ 2020.08.26-A/1 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию F_T_R4 

FB05xxT-1WR4 Keywords:

Дата модификации: 26.08.2020

Размер: 2.34 Мб

5 стр.

    Товары серии F_T_R4

    Наименование i Упаковка
    FB0505T-1WR4 (MORNSUN)
     
    		в ленте 700 шт