Серия DC-DC модульных преобразователей IB05_XT-1WR3

Общие характеристики

	Раздел	DC-DC модульные преобразователи
	Монтаж
	Количество каналов
	Входное напряжение
	Комплекс защит
	Номинальное входное напряжение
	Напряжение изоляции вход-выход
	Размер	15.24×8.5×7.5 мм
	Рабочая температура

Документация на серию IB05_XT-1WR3

DC/DC Converter IB05_XT-1WR3 series 1W isolated DC-DC converter Fixed input voltage,regulated single output FEATURES  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range: -40℃ to +85℃  I/O isolation test voltage 1.5k VDC  Industry standard pin-out  Compact SMD package Patent Protection RoHS  Designed to meet EN62368 safety standards IB05_XT-1WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for occasions of: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion circuits, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Input Voltage (VDC) Certification Part No. IB0505XT-1WR3 IB0509XT-1WR3 IB0512XT-1WR3 Capacitive Nominal Voltage (Range) (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. 3.3 250/25 62/66 2400 5 200/20 65/69 2400 9 111/12 66/70 1000 12 84/9 67/71 560 15 67/7 67/71 560 IB0503XT-1WR3 -- Output 5 (4.75-5.25) IB0515XT-1WR3 Load (µF) Max. Input Specifications Item Input Current (full load / no-load) Operating Conditions 5VDC input Min. Typ. Max. 3.3VDC output -- 303/5 323/-- 5VDC output -- 290/5 308/-- 9VDC output -- 286/6 304/-- 12VDC/15VDC output -- 282/9 299/-- -- 30 -- Reflected Ripple Current* Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: * Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. Output Specifications Item Operating Conditions Voltage Accuracy full load Linear Regulation Input voltage change: ±1% Min. Typ. Max. -- -- ±3 -- -- ±0.25 3.3VDC output -- -- ±3 All other output voltages -- -- ±2 Unit % Load Regulation 10%-100% load Ripple&Noise* 20MHz bandwidth -- 30 100 mVp-p Temperature Coefficient full load -- -- ±0.03 %/℃ Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. 1500 -- -- VDC 2021.03.04-A/1 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation  PDF

Документация на IB0505XT-1WR3 

IB05_XT-1WR3 Keywords:

Дата модификации: 04.03.2021

Размер: 1.3 Мб

5 стр.

• найти IB05_XT-1WR3.pdf

Товары серии IB05_XT-1WR3

Наименование	i	Упаковка	P вых	Выход	U1	I1	КПД
IB0503XT-1WR3 (MORNSUN)
IB0505XT-1WR3 (MORNSUN)