Серия DC-DC модульных преобразователей IB_S-2W

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
КПД
Напряжение изоляции вход-выход
Размер 19.6×6×10 мм
Рабочая температура

Документация на серию IB_S-2W

FEATURES IB_S-2W Series 2W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output           Patent Protection RoHS APPLICATIONS MODEL SELECTION MODEL SELECTION Certification Model IB0505S-2W IB0512S-2W The IB_S-2W Series are specially designed for applications where power supply are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) The voltage of the input power supply is within a range of ±5% max; 2) Input to output isolation of up to 1000VDC is required; 3) Applications requiring tight line and load regulation and/or low ripple and noise. Input Voltage (VDC) Nominal Range 5 4.75-5.25 Output Voltage (VDC) IB1205S-2W CE IB1212S-2W Compact size SIP package I/O isolation test voltage 1k VDC Operating ambient temperature range -40℃ to +85℃ Excellent thermal characteristic Internal surface mounted design Industry standard pin-out No external component required RoHS Compliant EN60950 Approval 12 11.4-12.6 IB1215S-2W Output Current (mA) Input Current typical (mA) Max. Min. Full Load 5 400 40 580 12 150 15 507 5 400 40 238 12 167 16 228 15 133 13 231 Full Load Efficiency (%) No Load 25 20 Min. Typ. 65 69 67 71 66 70 73 77 68 72 IB1505S-2W 15 14.25-15.75 5 400 40 190 15 66 70 IB2405S-2W 24 22.8-25.2 5 400 40 119 8 66 70 OUTPUT SPECIFICATIONS Item Test condition Min. Typ. Max. IB1212S-2W -- -- ±1 Others -- -- ±0.5 Linear regulation Vin change nominal ±1% Load regulation 10% to 100% load step -- ±1 ±2 voltage accuracy 100% load -- -- ±3 Temperature Coefficient 100% load -- -- ±0.03 Ripple* 20MHz Bandwidth -- 20 30 Noise* 20MHz Bandwidth -- 50 150 Unit % %/℃ mVp-p Note*: The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. ENVIRONMENTAL SPECIFICATION Item Test Conditions Storage humidity range Non condensing Min. Typ. Max. Unit %RH -- -- 95 Operating temperature -40 -- 85 Storage temperature -55 -- 125 The copyright and authority for the interpretation of the products are reserved by MORNSUN IB_S-2W 2018.10.20-B/3 ℃ Page 1 of 4 PDF
Документация на серию IB_S-2W 

 Keywords:

Дата модификации: 13.11.2018

Размер: 381.1 Кб

3 стр.

IB_S-2W Series 2W, FIXED INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER RoHS FEATURES PRODUCT PROGRAM Small Footprint SIP Package 1KVDC Isolation Temperature Range: -40°C to +85°C No External Component Required Internal SMD construction Continuous Short Circuit Protection Industry Standard Pinout RoHS Compliance Input Part Number Voltage (VDC) Nominal Output Range Voltage (VDC) Current (mA) Max Min Switching Efficiency frequency (%, Typ) (KHz) IB0505S-2W 5 4.75-5.25 5 400 40 70 333 IB1205S-2W 12 11.40-12.60 5 400 40 71 58 IB1505S-2W* 15 14.25-15.75 5 400 40 71 - IB2405S-2W 24 22.8-25.2 5 400 40 71 66 APPLICATIONS The IB_S-2W Series are specially designed for applications where a single power supply is highly isolated from the input power supply in a distributed power supply system on a circuit board. * Designing. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation ≤±5%); 2) Where isolation is necessary between input and output (isolation voltage ≤1000VDC); ISOLATION SPECIFICATIONS 3) Where the regulation of the output voltage and the output ripple and noise are demanded. Item Test condition Min Typ Max Isolation voltage Tested for 1 minute and 1mA max 1000 VDC Isolation resistance Test at 500VDC MΩ 1000 Isolation capacitance 100 Units pF MODEL SELECTION IB0505S-2W COMMON SPECIFICATION Rated Power Package Style Output Voltage Input Voltage Product Series Item MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: 86-20-28203030 Fax:86-20-28203068 Http://www.mornsun-power.com MORNSUN reserves the copyright Test condition Min Output power Typ 0.2 Max Units 2 W Line regulation For Vin change of 5% ±0.5 Load regulation 10% to 100% load ±1.5 Output voltage accuracy 100% full load Temperature drift 100% full load Ripple* 20MHz Bandwidth 20 30 Noise* 20MHz Bandwidth 50 150 % ±3 0.03 %/°C mVp-p *Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. See below recommended circuits for more details. 3. Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the life of product. Specifications subject to change without notice. IB_S-2W A/3-2010 Page 1 of 2 PDF
Документация на IB0505S-2W 

IB_S-2W_EN.doc

Дата модификации: 15.06.2011

Размер: 221.8 Кб

2 стр.

    Товары серии IB_S-2W

    Наименование i Упаковка U вх Выход U вх ном. U1 I1
    IB0505S-2W (MORNSUN)
     
    IB1205S-2W (MORNSUN)
     
    IB1212S-2W (MORNSUN)
     
    IB1215S-2W (MORNSUN)
     
    IB2405S-2W (MORNSUN)