Серия DC-DC модульных преобразователей IF05_S-1WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Возможности
Комплекс защит
Номинальное входное напряжение
КПД
Напряжение изоляции вход-выход
Размер 19.65×6×10.16 мм
Рабочая температура

Документация на серию IF05_S-1WR3

DC/DC Converter IF05_S-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, regulated single output  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 73%  I/O isolation test voltage 3k VDC  Industry standard pin-out CB Report RoHS Patent Protection UL 62368-1 EN 62368-1 BS EN 62368-1  SIP package IEC 62368-1 IF05_S-1WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for occasions of : pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Input Voltage (VDC) Certification EN/BS EN UL/EN/BS EN/IEC EN/BS EN Part No. Output Full Load Efficiency (%) Min./Typ. Capacitive Load (µF) Nominal Voltage Current (mA) (Range) (VDC) Max./Min. IF0503S-1WR3 3.3 250/25 63/67 2400 IF0505S-1WR3 5 200/20 66/70 2400 9 111/12 67/71 1000 IF0509S-1WR3 IF0512S-1WR3 5 (4.75-5.25) Max. 12 84/9 68/72 560 IF0515S-1WR3 15 67/7 69/73 560 IF0524S-1WR3 24 41/4 69/73 100 Input Specifications Item Input Current (full load / no-load) Operating Conditions Min. 3.3VDC/5VDC output 9VDC/12VDC output 15VDC/24VDC output Reflected Ripple Current* Typ. Max. -- 286/5 303/10 -- 282/12 299/20 -- 274/18 290/30 15 -- -- Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: *Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Voltage Accuracy Linear Regulation Load Regulation Typ. Max. -- -- ±3 Input voltage change: ±1% -- -- ±0.25 3.3VDC output,10%-100% load -- -- ±3 Others -- 30 75 24VDC output -- 50 100 ±0.02 -- Others, 10%-100% load Ripple & Noise* 20MHz bandwidth Temperature Coefficient 100% load Short-circuit Protection Min. Unit % ±2 -- mVp-p %/℃ Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. 2021.12.28-A/9 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на IF0524S-1WR3 

IF05_S-1WR3 Keywords:

Дата модификации: 28.12.2021

Размер: 1.19 Мб

4 стр.

DC/DC Converter IF05_S-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage and regulated single output  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range: -40℃ ~ +85℃  High efficiency up to 73%  I/O isolation test voltage 3k VDC  Industry standard pin-out CB Patent Protection RoHS  SIP package  IEC62368, UL62368, EN62368 approved IF05_S-1WR3 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for occasions of : pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Input Voltage (VDC) Full Load Efficiency (%) Min./Typ. Capacitive 250/25 63/67 2400 5 200/20 66/70 2400 9 111/12 67/71 1000 12 84/9 68/72 560 IF0515S-1WR3 15 67/7 69/73 560 IF0524S-1WR3 24 41/4 69/73 100 Certification CE UL/CE/CB CE Output Part No. Nominal Voltage Current (mA) (Range) (VDC) Max./Min. IF0503S-1WR3 3.3 IF0505S-1WR3 IF0509S-1WR3 IF0512S-1WR3 5 (4.75-5.25) Load (µF) Max. Input Specifications Item Input Current (full load / no-load) Operating Conditions Min. Typ. Max. 3.3VDC/5VDC output -- 286/5 303/10 9VDC/12VDC output -- 282/12 299/20 15VDC/24VDC output -- 274/18 290/30 -- 15 -- Reflected Ripple Current* Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: *Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Min. Typ. Max. -- -- ±3 Input voltage change: ±1% -- -- ±0.25 3.3VDC output,10%-100% load -- -- ±3 Voltage Accuracy Linear Regulation Load Regulation Others,10%-100% load Ripple & Noise* 20MHz bandwidth Temperature Coefficient 100% load Short-circuit Protection Unit % ±2 Others -- 30 75 24VDC output -- 50 100 -- ±0.02 -- mVp-p %/℃ Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. 2019.02.21-A/7 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию IF05_S-1WR3 

IF05_S-1WR3 Keywords:

Дата модификации: 21.02.2019

Размер: 605.4 Кб

4 стр.

    Товары серии IF05_S-1WR3

    Наименование i Упаковка Выход U1 I1
    IF0503S-1WR3 (MORNSUN)
     
    		в линейках 33 шт
    IF0505S-1WR3 (MORNSUN)
     
    		в линейках 22 шт
    IF0509S-1WR3 (MORNSUN)
     
    IF0512S-1WR3 (MORNSUN)
     
    IF0515S-1WR3 (MORNSUN)
     
    IF0524S-1WR3 (MORNSUN)
     
    		10 шт