Серия DC-DC модульных преобразователей KUB48_EB

Общие характеристики

Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит КЗ, перегрузка, перегрев, от пониженного входного напряжения
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 60.8×25×12.7 мм
Рабочая температура

Документация на серию KUB48_EB

Non-isolated Buck-Boost Converter KUB4836EB(F)-10A(-RS) Non-isolated Buck-Boost DC-DC converter Ultra-wide input and regulated single output FEATURES  Input voltage range: 9 - 60V  Output voltage range: 0 - 60V  Output current range: 0 - 10A    Both output voltage and current are adjustable High efficiency up to 95% Input under-voltage protection, output short-circuit protection, over-temperature protection  Operating ambient temperature range: -40℃ to +105℃  Patent Protection Industry standard 1/8-Brick package and pin-out RoHS The products with ultra-wide voltage input range of 9-60V, an adjustable output voltage range of 0-60V, and an adjustable output current range of 0-10A. They feature efficiency up to 95%, operating ambient temperature of -40℃ to +105℃, input under-voltage, output short circuit, over-temperature protection, remote On/Off control, output voltage adjustment and output current adjustment. They are widely used in applications such as intelligent robotic, communication, battery powered systems and DC-DC distributed power supply . Selection Guide Input Certification Part No. ① Nominal (Range) (VDC) -- KUB4836EB(F)10A KUB4836EB(F)10A-RS 48 (9-60) 48 (9-60) ② Max. (VDC) Output Current Limit (A) Typ. 65 12.5 65 12.5 Nominal (Range) (VDC) Full Load ③ Efficiency Current Limit (A) Typ. Current Setting Range (A) 12.5 0-10 93/95 12.5 0-10 93/95 36 (0-60) 36 (0-60) (%) Min./Typ. Note: ①Use ”F” suffix for heat sink mounting; ②Exceeding the maximum input voltage may cause permanent damage; ③Efficiency is measured at nominal input voltage, nominal output voltage and max. output load. Input Specifications Item Input Current (full load/no-load) Operating Conditions Nominal input voltage, nominal output voltage Surge Voltage (1sec. max.) Start-up Voltage Input Under-voltage Protection Start-up Time Nominal input voltage, constant resistance load Min. Typ. Max. -- 7895/25 8065/50 mA -0.7 -- 65 VDC -- -- 9 VDC 6 7 -- VDC -- -- 100 ms Input Filter C filter Hot Plug Unavailable Input Reverse Polarity Protection Unavailable Ctrl ① Input Current Limit Unit Module on Ctrl pin connected to -Vin or low level (0-0.8VDC) Module off Ctrl open circuit or connected to TTL high level (1.8-5.0VDC) Input current when off -- 5 15 mA Input voltage range 11 12.5 14 A Note: ①The Ctrl pin voltage is referenced to input -Vin. When Pin of Vset and Iset are floating, there will be voltage and current output after power on. Please put the Ctrl pin in a high impedance state or connect to a high level before the product is powered on. 2021.05.30-A/0 Page 1 of 8 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на семейство KUB4836 

KUB4836EB(F)-10A(-RS) Keywords:

Дата модификации: 03.01.2023

Размер: 3.64 Мб

8 стр.

    Товары серии KUB48_EB

    Наименование i Упаковка
    KUB4836EB-10A (MORNSUN)
    KUB4836EB-10A-RS (MORNSUN)