Вход / Регистрация

Серия DC-DC модульных преобразователей QA151M

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 19.5×9.8×12.75 мм
Рабочая температура

Документация на серию QA151M

MOSFET SiC Driver Dedicated Power Supply QA151M FEATURES MOSFET SiC driver dedicated power supply High efficiency up to 80% SIP package I/O isolation test voltage: 3.5k VAC Ultra low isolation capacitor Operating ambient temperature range: -40℃ to +105℃ Continuous short-circuit protection Industry standard pin-out        Patent Protection RoHS QA151M is DC-DC module power supply designed for MOSFET SiC driver requiring two set of isolation power supply. The mode uses two common ground output modes to better provide energy for SiC turn-on and turn-off. Output short-circuit protection and self-recovery capabilities are also provided. General application includes: 1.Universal converter 2.AC servo drive systems 3.Electric welding machines 4.Un-interruptible power supplies (UPS) Selection Guide Input Voltage (VDC) Part No. Nominal (Range) 15 (13.5-16.5) QA151M Output Voltage (VDC) +Vo/-Vo Current (mA) +Io/-Io Full Load Efficiency(%) Min./Typ. Max. Capacitive Load*(µF) +15/-5 +100/-100 76/80 220 Note:*The specified maximum capacitive load value for positive and negative output is identical. Input Specifications Item Operating Conditions Input Current (full load / no-load) 15V input Surge Voltage (1sec. max.) Min. Typ. Max. Unit -- 162/15 -- mA -- 21 VDC -0.7 Input Filter Capacitor filter Hot Plug Unavailable Output Specifications Item Operating Conditions Output Voltage Voltage Accuracy Min. Typ. Vin=15VDC, Pin6 & Pin7 +Io=+100mA +Vo 14.4 15 15.9 Vin=15VDC, Pin5 & Pin6 -Io=-100mA -Vo -4.75 -5 -5.75 Vin=15VDC, Pin6 & Pin7 +Io=+100mA +Vo -4% to +6% Vin=15VDC, Pin5 & Pin6 -Io=-100mA -Vo -5% to +15% Input voltage change: ±1% Load Regulation 10%-100% load Ripple & Noise 20MHz bandwidth Temperature Coefficient 100% load ＊ Short-circuit Protection Unit VDC See output regulation curve(Fig. 1) 10%-100% load Linear Regulation Max. -- ±1.1 -- +Vo -- 7 -- -Vo -- 9 -- +Vo -- 120 -- -Vo -- 80 -- ±0.02 -- -- -% mVp-p %/℃ Continuous, self-recovery Note:*The “parallel cable” method is used for ripple and noise test, please refer to DC-DC converter application notes for specific information. 2021.07.26-A/3 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию QA151M 

QA151M Keywords:

Дата модификации: 28.12.2021

Размер: 641.8 Кб

4 стр.

MOSFET SiC Driver Dedicated Power Supply QA151M FEATURES MOSFET SiC driver dedicated power supply High efficiency up to 80% SIP package I/O isolation test voltage: 3.5k VAC Ultra low isolation capacitor Operating ambient temperature range: -40℃ to +105℃ Continuous short-circuit protection Industry standard pin-out        Patent Protection RoHS QA151M is DC-DC module power supply designed for MOSFET SiC driver requiring two set of isolation power supply. The mode uses two common ground output modes to better provide energy for SiC turn-on and turn-off. Output short-circuit protection and self-recovery capabilities are also provided. General application includes: 1.Universal converter 2.AC servo drive systems 3.Electric welding machines 4.Un-interruptible power supplies (UPS) Selection Guide Input Voltage (VDC) Part No. Nominal (Range) 15 (13.5-16.5) QA151M Voltage (VDC) +Vo/-Vo Output Current (mA) +Io/-Io Full Load Efficiency(%) Min./Typ. Max. Capacitive Load*(µF) +15/-5 +100/-100 76/80 220 Note:*The specified maximum capacitive load value for positive and negative output is identical. Input Specifications Item Operating Conditions Input Current (full load / no-load) 15V input Surge Voltage (1sec. max.) Min. Typ. Max. Unit -- 162/15 -- mA -- 21 VDC -0.7 Input Filter Capacitor filter Hot Plug Unavailable Output Specifications Item Operating Conditions Output Voltage Voltage Accuracy Min. Typ. Vin=15VDC, Pin6 & Pin7 +Io=+100mA +Vo 14.4 15 15.9 Vin=15VDC, Pin5 & Pin6 -Io=-100mA -Vo -4.75 -5 -5.75 Vin=15VDC, Pin6 & Pin7 +Io=+100mA +Vo -4% to +6% Vin=15VDC, Pin5 & Pin6 -Io=-100mA -Vo -5% to +15% Input voltage change: ±1% Load Regulation 10%-100% load Ripple & Noise 20MHz bandwidth Temperature Coefficient 100% load ＊ Short-circuit Protection Unit VDC See output regulation curve(Fig. 1) 10%-100% load Linear Regulation Max. -- ±1.1 -- +Vo -- 7 -- -Vo -- 9 -- +Vo -- 120 -- -Vo -- 80 -- ±0.02 -- -- -% mVp-p %/℃ Continuous, self-recovery Note:*The “parallel cable” method is used for ripple and noise test, please refer to DC-DC converter application notes for specific information. 2021.07.26-A/3 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию QA151M 

Subject: QA151M

Дата модификации: 19.08.2021

Размер: 641.8 Кб

4 стр.

    Товары серии QA151M

    Наименование i Упаковка
    QA151M (MORNSUN)
     
    		в линейках 50 шт