Серия DC-DC модульных преобразователей QA152D

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Серия
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Напряжение 2 выхода
Ток 1 выхода
Ток 2 выхода
КПД
Напряжение изоляции вход-выход
Размер 31.6×20.3×10.7 мм
Рабочая температура

Документация на серию QA152D

DC/DC Converter for IGBT Driver QA152D FEATURES DC/DC Converter for IGBT driver  High efficiency up to 87%  DIP package  I/O isolation test voltage 4k VAC  Isolation capacitance: 3pF  Operating ambient temperature range: -40℃ to +85℃  Input under-voltage protection RoHS EN60950-1 QA152D is DC-DC converters for IGBT drivers, offer 4.8W rated output power. The built-in common-ground mode of the unique asymmetric voltage output mode reduces the driver loss of IGBT driver. The converters offer short-circuit protection with auto-recovery and are widely used in applications such as: 1. Inverters in general 2. AC servo drive system 3. Electric welding machines 4. Uninterruptible power supplies (UPS) Selection Guide Input Certification Part No. Voltage(VDC) Nominal(Range) EN QA152D Output Current(mA, Typ.) full load/no-load Voltage (VDC)+Vo/-Vo Current (mA)+Io/-Io Full Load Efficiency(%) Min./Typ. 368/20 +15/-9 +200/-200 83/87 15 (13.5-16.5) Max. Capacitive Load*(µF) 1000 Note:*The specified maximum capacitive load for positive and negative output is identical Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Under-voltage Protection Voltage Full load 11.6 12.0 12.6 VDC Input Filter Capacitance filter Hot Plug Unavailable Output Specifications Item Output Current* Output Voltage Operating Conditions Min. Typ. Max. +Io Vin=15VDC 20 200 250 -Io Vin=15VDC -20 -200 -250 +Vo Vin=15VDC, Pin16 & Pin14 +Io=+200mA 13.5 15 16.5 -Vo Vin=15VDC, Pin11 & Pin9 -Io=-200mA -8.1 -9 -9.9 Voltage Accuracy Unit mA VDC See output regulation curve (Fig. 1) Linear Regulation Full load -- ±1.2 ±1.5 -- Load Regulation 10%-100% load -- ±8 ±10 % Temperature Coefficient Full load -- -- ±0.03 %/℃ Ripple & Noise** Full load,20MHz bandwidth -- 80 120 mVp-p Note: *The typical output current is the rated full-load current of the product, the maximum output current is the maximum over-load current which the product allowed. ** Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation. General Specifications Item Operating Conditions Min. Typ. Max. Unit Insulation Voltage Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. 4000 -- -- VAC 2021.07.26-A/4 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию QA152D 

QA152D Keywords:

Дата модификации: 28.12.2021

Размер: 958.7 Кб

4 стр.

DC/DC Converter for IGBT Driver QA152D FEATURES DC/DC Converter for IGBT driver  High efficiency up to 87%  DIP package  I/O isolation test voltage 4k VAC  Isolation capacitance: 3pF  Operating ambient temperature range: -40℃ to +85℃  Input under-voltage protection RoHS EN60950-1 QA152D is DC-DC converters for IGBT drivers, offer 4.8W rated output power. The built-in common-ground mode of the unique asymmetric voltage output mode reduces the driver loss of IGBT driver. The converters offer short-circuit protection with auto-recovery and are widely used in applications such as: 1. Inverters in general 2. AC servo drive system 3. Electric welding machines 4. Uninterruptible power supplies (UPS) Selection Guide Input Certification Part No. Voltage(VDC) Nominal(Range) EN QA152D Output Current(mA, Typ.) full load/no-load Voltage (VDC)+Vo/-Vo Current (mA)+Io/-Io Full Load Efficiency(%) Min./Typ. 368/20 +15/-9 +200/-200 83/87 15 (13.5-16.5) Max. Capacitive Load*(µF) 1000 Note:*The specified maximum capacitive load for positive and negative output is identical Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Under-voltage Protection Voltage Full load 11.6 12.0 12.6 VDC Input Filter Capacitance filter Hot Plug Unavailable Output Specifications Item Output Current* Output Voltage Operating Conditions Min. Typ. Max. +Io Vin=15VDC 20 200 250 -Io Vin=15VDC -20 -200 -250 +Vo Vin=15VDC, Pin16 & Pin14 +Io=+200mA 13.5 15 16.5 -Vo Vin=15VDC, Pin11 & Pin9 -Io=-200mA -8.1 -9 -9.9 Voltage Accuracy Unit mA VDC See output regulation curve (Fig. 1) Linear Regulation Full load -- ±1.2 ±1.5 -- Load Regulation 10%-100% load -- ±8 ±10 % Temperature Coefficient Full load -- -- ±0.03 %/℃ Ripple & Noise** Full load,20MHz bandwidth -- 80 120 mVp-p Note: *The typical output current is the rated full-load current of the product, the maximum output current is the maximum over-load current which the product allowed. ** Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation. General Specifications Item Operating Conditions Min. Typ. Max. Unit Insulation Voltage Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. 4000 -- -- VAC 2021.07.26-A/4 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию QA152D 

Subject:

Дата модификации: 13.08.2021

Размер: 958.7 Кб

4 стр.

    Товары серии QA152D

    Наименование i Упаковка
    QA152D (MORNSUN)
     
    		в линейках 15 шт