Серия драйверов FET-IGBT QC962

Mornsun

Общие характеристики

 Раздел Драйверы FET-IGBT
Опции Buffer or Inverter Based IGBT Driver
Рабочая температура

Документация на серию QC962

IGBT Driver QC962-8A Hybrid integrated IGBT driver FEATURES  Built-in high CMRR opto-coupler (CMR: 30kV/µs typ., 15kV/µs min.)  Built in bi-polar power supply  Input signal compatible with CMOS & TTL level  High-isolation voltage opto-coupler (3750Vrms/min)  Short-circuit protection and output fault function Patent protection  Soft shut-down and reset timer can be used during RoHS over-current fault Recommended modules  Adjustable controlled time for detecting short circuit  600V series IGBT (current ≤600A)  1,200V series IGBT (current ≤400A)  1,700V series IGBT (current ≤200A)  Switching frequency up to 40kHz  Drop-in replacement to M57962AL (See compatibility notes) Applications  General inverter  AC servo drive system  Uninterruptible power supply (UPS)  Electric welding machine QC962-8A is an integrated hybrid IGBT driver. Its main function is to receive the square wave signal from the controller, and convert it into an isolated, amplified gate signal which controls the IGBT’s turn-on and turn off cycle. It is a square wave signal through the optocoupler that provides reliable electrical isolation, therefore the control system cannot be affected by the common mode interference caused by IGBT. In addition, the QC962-8A driver can also be used to detect the undersaturated voltage drop of the IGBT collector to quickly identify the IGBT’s overcurrent or short circuit state and trigger the protection function. so as to avoid IGBT being burned in the fault conditions, afterwards the controller will issue a warning signal. Maximum ratings Item Power Supply Input Voltage Symbol VCC VEE Test Conditions DC Value 18 -15 Current Input During High Level Signal Status I IH Between Terminal 13 and 14 Voltage Input During High Level Signal Status VIH No Limiting Current Resistance Vo  Input Signal Is High VCC Input Signal Is Low VEE Drive Output Voltage Output Current Vo  I g on I g off Pulse Width : 2µs Frequency f = 20kHz Input & Output Isolation Test VISO Sine Wave 50Hz / 60 Hz, 1min., Leakage Current <1mA Fault Output Current I FO Max. Input Voltage to Fault Detect Pin VR1 Unit V 25 mA 5.25 V +8 -8 V A 3750 V PIN8 Input Current 20 mA PIN1 Input Voltage 50 V Operating Temperature TOP - 40℃ to + 70℃ Storage Temperature TST - 50 ℃ to + 125℃ -- Note: 1. Ambient temperature is Ta=25℃, unless otherwise specified; 2. 20V <VCC-VEE <28V. 2021.07.26-A/6 Page 1 of 6 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на QC962-8A 

QC962-8A Keywords:

Дата модификации: 28.12.2021

Размер: 973.6 Кб

6 стр.

IGBT Driver QC962-8A Hybrid integrated IGBT driver FEATURES  Built-in high CMRR opto-coupler (CMR: 30kV/µs typ., 15kV/µs min.)  Built in bi-polar power supply  Input signal compatible with CMOS & TTL level  High-isolation voltage opto-coupler (3750Vrms/min)  Short-circuit protection and output fault function Patent protection  Soft shut-down and reset timer can be used during RoHS over-current fault Recommended modules  Adjustable controlled time for detecting short circuit  600V series IGBT (current ≤600A)  1,200V series IGBT (current ≤400A)  1,700V series IGBT (current ≤200A)  Switching frequency up to 40kHz  Drop-in replacement to M57962AL (See compatibility notes) Applications  General inverter  AC servo drive system  Uninterruptible power supply (UPS)  Electric welding machine QC962-8A is an integrated hybrid IGBT driver. Its main function is to receive the square wave signal from the controller, and convert it into an isolated, amplified gate signal which controls the IGBT’s turn-on and turn off cycle. It is a square wave signal through the optocoupler that provides reliable electrical isolation, therefore the control system cannot be affected by the common mode interference caused by IGBT. In addition, the QC962-8A driver can also be used to detect the undersaturated voltage drop of the IGBT collector to quickly identify the IGBT’s overcurrent or short circuit state and trigger the protection function. so as to avoid IGBT being burned in the fault conditions, afterwards the controller will issue a warning signal. Maximum ratings Item Power Supply Input Voltage Symbol VCC VEE Test Conditions DC Value 18 -15 Current Input During High Level Signal Status I IH Between Terminal 13 and 14 Voltage Input During High Level Signal Status VIH No Limiting Current Resistance Vo  Input Signal Is High VCC Input Signal Is Low VEE Drive Output Voltage Output Current Vo  I g on I g off Pulse Width : 2µs Frequency f = 20kHz Input & Output Isolation Test VISO Sine Wave 50Hz / 60 Hz, 1min., Leakage Current <1mA Fault Output Current I FO Max. Input Voltage to Fault Detect Pin VR1 Unit V 25 mA 5.25 V +8 -8 V A 3750 V PIN8 Input Current 20 mA PIN1 Input Voltage 50 V Operating Temperature TOP - 40℃ to + 70℃ Storage Temperature TST - 50 ℃ to + 125℃ -- Note: 1. Ambient temperature is Ta=25℃, unless otherwise specified; 2. 20V <VCC-VEE <28V. 2021.07.26-A/6 Page 1 of 6 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на QC962-8A 

Subject:

Дата модификации: 19.08.2021

Размер: 973.6 Кб

6 стр.

    Товары серии QC962

    Наименование i Упаковка
    QC962-8A (MORNSUN)
     
     
    		 на поддоне 3 шт