Серия Интерфейс CAN TD3

Общие характеристики

	Раздел	Интерфейс CAN
	Диапазон питающих напряжений

Документация на серию TD3

Protocol Conversion Module TD5(3)USPCAN Series Isolated UART/SPI T to CAN Module FEATURES  Built-in high efficiency isolated power supply  Two-port isolation test voltage ( 3kVDC )  UART baud rate up to 921.6kbps  SPI rate up to 1.5Mbps  CAN baud rate up to 1Mbps  Supporting transparent conversion, transparent tape identification conversion, custom protocol conversion  Supports two-way data communication between UART/SPI and CAN interface RoHS  Operating ambient temperature range: - 40℃ to + 85℃  The bus supports maximum 110 nodes  Set isolation and ESD bus protection in one The main function of TD5(3)USPCAN series is to convert UART/SPI signal into CAN bus differential level to realize signal interface expansion and isolation. TD5(3)USPCAN is a communication conversion module that integrates microprocessor, CAN transceiver, power isolation and signal isolation. The product is compatible with UART/SPI interface, can be directly embedded into the device with UART/SPI interface, and expands more CAN communication interface on UART/SPI device to realize data communication between UART/SPI device and CAN bus network. Selection Guide Certification CE Part No. Power input (VDC) Static Current (mA) (Max.) Maximum Operating Current (mA) UART Baud rate (bps) SPI Rate (Mbps) Can Baud rate (bps) Number of Nodes TD3USPCAN 3.3 35 110 300 - 921600 0 - 1.5 5k - 1M 110 TD5USPCAN 5 35 105 300 - 921600 0 - 1.5 5k - 1M 110 Absolute Limits Item Operating Conditions Supply Voltage Min. Typ. Max. 3.3V series -- -- 3.6 5.0V series -- -- 5.5 -- -- 300 ℃ Min. Typ. Max. Unit 3.15 3.3 3.45 4.75 5.0 5.25 2.75 -- -- Soldering spot is 1.5mm away from case for 10 seconds Pin Soldering Temperature Unit VDC Input Specifications Item Symbol TD3USPCAN Power Supply Input Voltage TD5USPCAN Power Supply Input Voltage TXD Logic Level RXD Logic Level VCC High-level VOH Low-level VOL -- -- 0.4 High-level VIH 2.31 -- 5 Low-level VIL 0 -- 0.99 Serial Interface VDC Standard UART interface Time Specifications(1) Item Symbol Min. Typ. Max. Unit Reset Low Hold Time tRST_HOLD 100 - - us Initialization Wait Time tINIT_WAIT 3 - - ms UART Frame Interval tFRAM_INTER_UART 10*n / fCLK_UART - - s (2) 2021.03.24-A/4 Page 1 of 7 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation  PDF

Документация на TD5USPCAN 

TD5(3)USPCAN Keywords:

Дата модификации: 28.12.2021

Размер: 1.91 Мб

7 стр.

• найти TD3.pdf

Товары серии TD3